I have a Hictop printer with some issues so I'm gathering parts to update it.
Among them is a Big Tree Tech SKR 1.4 board (not the Turbo, which is identical
except runs the CPU 10Mhz faster).
Do you have any experience with that one? There are a ton of display boards for
BTT controllers but wha
On 4/15/24 21:16, Gregg Eshelman via Emc-users wrote:
I have a Hictop printer with some issues so I'm gathering parts to update it.
Among them is a Big Tree Tech SKR 1.4 board (not the Turbo, which is identical
except runs the CPU 10Mhz faster).
Are you talking to me?
Do you have any experi
On 4/15/24 21:16, Gregg Eshelman via Emc-users wrote:
I have a Hictop printer with some issues so I'm gathering parts to update it.
Among them is a Big Tree Tech SKR 1.4 board (not the Turbo, which is identical
except runs the CPU 10Mhz faster).
Do you have any experience with that one? There
On 4/15/24 22:31, gene heskett wrote:
On 4/15/24 21:16, Gregg Eshelman via Emc-users wrote:
I have a Hictop printer with some issues so I'm gathering parts to
update it. Among them is a Big Tree Tech SKR 1.4 board (not the Turbo,
which is identical except runs the CPU 10Mhz faster).
Do you ha
Where do you get those breakout boards? I'm looking for ones already assembled.
On Monday, April 15, 2024 at 08:25:05 PM MDT, gene heskett
wrote:
The breakout board I'm using plugs into a stepstick socket, gives 2 6
pin sockets I plug a 6 pin pigtail into
_
On 4/16/24 04:15, Gregg Eshelman via Emc-users wrote:
Where do you get those breakout boards? I'm looking for ones already assembled.
Its been several months but I'm pretty sure it was from amazon. Zero
docs though so I had to plugin the pigtail and find the signals with one
of my scopes. You
> On Apr 15, 2024, at 7:20 PM, gene heskett wrote:
>
> On 4/15/24 21:16, Gregg Eshelman via Emc-users wrote:
>> I have a Hictop printer with some issues so I'm gathering parts to update
>> it. Among them is a Big Tree Tech SKR 1.4 board (not the Turbo, which is
>> identical except runs the CP
On 4/16/24 20:46, Chris Albertson wrote:
On Apr 15, 2024, at 7:20 PM, gene heskett wrote:
On 4/15/24 21:16, Gregg Eshelman via Emc-users wrote:
I have a Hictop printer with some issues so I'm gathering parts to update it.
Among them is a Big Tree Tech SKR 1.4 board (not the Turbo, which is
For those on this LCNC list who have not seen Klipper, Klipper’s architecture
is very much like Linux CNC’s. Like LCNC, the g-code interpreter, kinematics,
and motion planning live in a “real computer” like a Raspberry Pi. Or I was
running it on a virtual machine running Linux on my Mac mini,
LCNC really should be doing this. If the Measa cards would maintain a queue
and a synchronized clock we would not care at all about latency. Klipper
proves the idea works.
This is basically what Mach 3/4 do
This fails as soon as you need the control to repond to
feedback in real time (Spi
>
>>LCNC really should be doing this. If the Measa cards would maintain a
>> queue
>>and a synchronized clock we would not care at all about latency. Klipper
>>proves the idea works.
>
> This is basically what Mach 3/4 do
>
> This fails as soon as you need the control to repond to
> feedback in r
On Wed, 2024-04-17 at 09:13 -0700, Peter Wallace wrote:
>
> > LCNC really should be doing this. If the Measa cards would
> > maintain a queue
> > and a synchronized clock we would not care at all about latency.
> > Klipper
> > proves the idea works.
>
> This is basically what Mach 3/4 do
>
>
No it does not fail, we can always send new commands in real time to be
executed “right away” (at the current time) and make the queued execution
system look and act as if there were no queue. A command taged with the
current time will jump to the front of the queue.
The system also allows fo
On Wed, 17 Apr 2024, Chris Albertson wrote:
Date: Wed, 17 Apr 2024 17:50:46 -0700
From: Chris Albertson
To: "Enhanced Machine Controller (EMC)"
Cc: Peter Wallace
Subject: Re: [Emc-users] Big Tree Tech Re: Mesa Card Stepgens?
No it does not fail, we can always send new commands in
> > ...
>
> If it can revert back to the way LinuxCNC works ( which requires realtime),
> there is no real advantage to queueing at all. Queueing is used to make
> up for the lack of realtime. For example Mach3 can do decent spindle
> synchronized motion, but only if this feature is implemented
se than not at all.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Chris Albertson
Sent: Wednesday, April 17, 2024 8:51 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Big Tree Tech Re: Mesa Card S
On Thu, 18 Apr 2024, Nicklas SB Karlsson wrote:
Date: Thu, 18 Apr 2024 13:33:20 +0200
From: Nicklas SB Karlsson
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Big Tree Tech Re: Mesa Card Stepgens?
...
If it can reve
17 matches
Mail list logo