On Wed, Sep 29, 2010 at 12:30 PM, Jon Elson wrote:
> If there are gears between the spindle and motor, then you have a
> backlash problem when the spindle reverses.
> Check out http://pico-systems.com/bridge_spindle.html to see how I put
> an encoder on a
> spindle that was almost impossible to f
Stuart Stevenson wrote:
> Gentlemen,
> I am a happy camper.
> Jeremy came in my office with a quiet voice to give me a report on how the
> Cinci cut the big plate with all the holes with a +-.002 location tolerance.
> I thought OH NO we have problems. He then smiled and said it nailed all the
>
At 10:53 PM 9/28/2010, you wrote:
>Gentlemen,
> I am a happy camper.
> Jeremy came in my office with a quiet voice to give me a report on how the
>Cinci cut the big plate with all the holes with a +-.002 location tolerance.
>I thought OH NO we have problems. He then smiled and said it nailed all
To match holes that good they are going to buy ground thread and shaft
bolts. Hah!
I pretty much plan on bolts being 0.003 undersize, sometimes I get
fooled.
Nice job on the machine.
Dave
On Tue, 2010-09-28 at 21:53 -0500, Stuart Stevenson wrote:
> Gentlemen,
> I am a happy camper.
> Jere
Gentlemen,
I am a happy camper.
Jeremy came in my office with a quiet voice to give me a report on how the
Cinci cut the big plate with all the holes with a +-.002 location tolerance.
I thought OH NO we have problems. He then smiled and said it nailed all the
holes. There was one dimension out o
