Hello...
Does estop latch works in emc2 2.3.5?
I try to load it in my hal file
#this works
loadrt estop_latch count=1
#when I add
addf estop-latch servo-thread
#or when I add
addf estop_latch servo-thread
the emc crashes
Slavko.
-
Try starting from a terminal, and check for the error message.
Alternatively look in dmesg for errors.
Regards,
Alex
On 4/15/2010 4:47 PM, Slavko Kocjancic wrote:
Hello...
Does estop latch works in emc2 2.3.5?
I try to load it in my hal file
#this works
loadrt estop_latch count=1
#when I
Alex Joni pravi:
> Try starting from a terminal, and check for the error message.
> Alternatively look in dmesg for errors.
>
> Regards,
> Alex
>
>
> On 4/15/2010 4:47 PM, Slavko Kocjancic wrote:
>> Hello...
>>
>> Does estop latch works in emc2 2.3.5?
>>
>> I try to load it in my hal file
>>
>> #th
Slavko Kocjancic pravi:
> The next problem is that latch itself doesn't do right job!
> The watchdog is active if input's are ok and latch not trigered.
> Ie I watch with hallmeter the output pin from estop latch. It does right
> thing.
> ie if ok.in and fault.in are correct and reset signal appli