The DMM servo system I have sitting on my bench at the moment has an
input to allow the motor to free wheel but still keep the encoder on
line. I haven't tried it yet but in theory you could have a free wheel
switch to flip when you wanted to move by hand then switch back once in
position.
I h
On 03/02/2017 05:28 AM, andy pugh wrote:
> On 2 March 2017 at 01:39, Greg Bentzinger wrote:
>
>> Using LCNC for the stand alone control seems like using a nuke to blow up an
>> ant hill.
> It might be expedient to just buy:
> http://divisionmaster.co.uk/divisionmaster.html
>
>> I was wondering
On 2 March 2017 at 01:39, Greg Bentzinger wrote:
> Using LCNC for the stand alone control seems like using a nuke to blow up an
> ant hill.
It might be expedient to just buy:
http://divisionmaster.co.uk/divisionmaster.html
> I was wondering if LCNC could be configured to drive steppers in vel
Greetings list members;
With all the talk or ARM vrs AVR vrs all others etc. I have a question for
those who might be able to point me towards a workable solution.
Back in the early 80's my uncle purchased a HAAS 5C programmable indexer. This
is the hardware that basically was the original foun