On 09/10/2016 12:35 PM, Marius Liebenberg wrote:
> The cncprofi work very well and with no fuss. I used it many times.
I finally had time for my project again and I bought the cncprofi one. I
managed to connect it to the plasma and it seems to work (shows up and
down and it changes when I shout
to implement a design without proper testing as far as latency
is concerned.
-- Original Message --
From: "Klemen Živkovič" <klemen.zivko...@gmail.com>
To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
Sent: 2016-09-12 21:06:28
Subje
I can see some plasma machines have serial interface also (
http://forum.robotsinarchitecture.org/index.php?action=dlattach;topic=232.0;attach=335).
Also found this thread -
https://forum.linuxcnc.org/forum/27-driver-boards/21445-rs-485-with-7i76.
Is serial plasma control over "plasma/serial"
I'd bet it does both and it may even have a output for ark ok...
JT
On 9/12/2016 8:53 AM, Alexander Brock wrote:
> On 09/11/2016 04:22 PM, John Thornton wrote:
>> Does is have connections to measure the tip voltage?
> I'm not exactly sure, it has a connection named "CNC" and it might be
> either
On 09/11/2016 04:22 PM, John Thornton wrote:
> Does is have connections to measure the tip voltage?
I'm not exactly sure, it has a connection named "CNC" and it might be
either an input for starting / stopping the cutting or an output for
measuring tip voltage.
Best Regards,
Alexander
Does is have connections to measure the tip voltage?
JT
On 9/10/2016 8:32 PM, Alexander Brock wrote:
> On 09/10/2016 01:21 AM, John Thornton wrote:
>> What kind of plasma torch do you have?
> This one:
>
> http://www.stamos-welding.com/s-plasma-125h
>
> Best Regards,
> Alexander
>
>
>
>
On 09/10/2016 01:21 AM, John Thornton wrote:
> What kind of plasma torch do you have?
This one:
http://www.stamos-welding.com/s-plasma-125h
Best Regards,
Alexander
signature.asc
Description: OpenPGP digital signature
You only need to monitor the cutting voltage of the arc.
-- Original Message --
From: "Alexander Brock" <a.br...@hhv-rheinklang.de>
To: emc-users@lists.sourceforge.net
Sent: 2016-09-10 00:59:32
Subject: Re: [Emc-users] Plasma Torch Height Control
On 09/09/2016 10:58 P
The cncprofi work very well and with no fuss. I used it many times.
-- Original Message --
From: "Alexander Brock" <a.br...@hhv-rheinklang.de>
To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
Sent: 2016-09-09 20:57:50
Subject:
What kind of plasma torch do you have?
JT
On 9/9/2016 5:59 PM, Alexander Brock wrote:
> On 09/09/2016 10:58 PM, John Thornton wrote:
>> Most LinuxCNC users use this one as do I.
>> http://mesaus.com/index.php?route=product/product=65_id=64
>> or
>>
On 09/09/2016 10:58 PM, John Thornton wrote:
> Most LinuxCNC users use this one as do I.
> http://mesaus.com/index.php?route=product/product=65_id=64
> or
> http://mesaus.com/index.php?route=product/product=65_id=65
> depending on your plasma torch.
Thank you for your answer :-)
I have a HF arc
Most LinuxCNC users use this one as do I.
http://mesaus.com/index.php?route=product/product=65_id=64
or
http://mesaus.com/index.php?route=product/product=65_id=65
depending on your plasma torch.
JT
On 9/9/2016 1:57 PM, Alexander Brock wrote:
> Hi,
>
> I recently bought a Plasma Cutter and built
Hi,
I recently bought a Plasma Cutter and built a CNC router and now I want
to add a Torch Height Control to it.
I found these models, does anyone have experience with them or
experience with other THC systems?
http://www.ebay.de/itm/172288076009
http://www.ebay.de/itm/262439946439
Jarl,
Thanks for the info. Am I correct in assuming that from the hardware
end using your plasma-thc that I only need to supply a raise or lower
to EMC to make it work?
My current thoughts are to use a voltage divider from the plasma
voltage out pins to reduce the voltage to a 0 to 10vdc range
@lists.sourceforge.net
Sent: Sunday, September 30, 2007 2:53 PM
Subject: [Emc-users] Plasma Torch Height Control
Is there a way in EMC2 to read an analog signal of some sort
to control the Z axis of a Plasma Table? The arc voltage of the
torch changes with distance to the material. Any
Is there a way in EMC2 to read an analog signal of some sort
to control the Z axis of a Plasma Table? The arc voltage of the
torch changes with distance to the material. Any suggestions?
Thanks
John
-
This SF.net email is
PS: thanks to Dallur/Rugludallur for some great documentation on the work
they did
- Original Message -
From: John Thornton [EMAIL PROTECTED]
To: emc-users@lists.sourceforge.net
Sent: Sunday, September 30, 2007 2:53 PM
Subject: [Emc-users] Plasma Torch Height Control
17 matches
Mail list logo
