Really? 100V?
Sure, 50Hz is found all over the place - but usually at 230V.
Japan is a WEIRD place, for historical reasons. Half the island is 60
Hz the other half
is 50 Hz. So, they have two totally separate electrical grids! This
led to some of the
crazy problems at the Fukushima
On Thursday, December 29, 2011 01:36:19 PM Clint Washburn did opine:
What type of transformer would someone use to connect to the American
Split-Phase 240 volt system to get 100-110 volt output? Would one like
this work?
On 12/29/2011 11:54 AM, Clint Washburn wrote:
What type of transformer would someone use to connect to the American
Split-Phase 240 volt system to get 100-110 volt output? Would one like this
work?
http://www.ebay.com/itm/Nunome-2-5-KVA-Transformer-/110344460317?pt=BI_Circu
On 12/29/2011 11:54 AM, Clint Washburn wrote:
What type of transformer would someone use to connect to the American
Split-Phase 240 volt system to get 100-110 volt output? Would one like this
work?
http://www.ebay.com/itm/Nunome-2-5-KVA-Transformer-/110344460317?pt=BI_Circu
What type of transformer would someone use to connect to the American
Split-Phase 240 volt system to get 100-110 volt output? Would one like this
work?
http://www.ebay.com/itm/Nunome-2-5-KVA-Transformer-/110344460317?pt=BI_Circu
it_Breakers_Transformershash=item19b10ad81d
a
refrence to explain it to me.
-Original Message-
From: gene heskett [mailto:ghesk...@wdtv.com]
Sent: Thursday, December 29, 2011 10:42 AM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Transformer Question
On Thursday, December 29, 2011 01:36:19 PM Clint Washburn did opine
I plan to have it in an enclosure. I am in the process of figuring out
components for the power suppply for my DC servos.
-Original Message-
From: Dave [mailto:e...@dc9.tzo.com]
Sent: Thursday, December 29, 2011 10:20 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users
As Gene already mentioned, why are you looking for a transformer at
all?
The split in split phase means that you can connect loads between
either hot and the neutral to get half of the overall voltage. So if
you have 240V line-to-line, you will get 120V line-to-neutral.
I can think of two
On Thu, Dec 29, 2011, at 11:36 AM, Clint Washburn wrote:
I am in the process of building a power supply for my lathe and need
a big transformer for for the powersupply. My main question is given
the type of transformer I was not sure how the transformer performs
with two hot legs as opposed
@lists.sourceforge.net
Subject: Re: [Emc-users] Transformer Question
On Thursday, December 29, 2011 01:36:19 PM Clint Washburn did opine:
What type of transformer would someone use to connect to the American
Split-Phase 240 volt system to get 100-110 volt output? Would one
like this work?
http
John Kasunich schrieb:
Note that some equipment that is rated for 100V has that rating
because it is used on 50Hz power. Motors and other inductive
loads that are rated for 120V 60Hz (normal US power) are sometimes
dual-labeled for 100V 50Hz, which is common in Japan and a few
other places.
, December 29, 2011 10:42 AM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Transformer Question
On Thursday, December 29, 2011 01:36:19 PM Clint Washburn did opine:
What type of transformer would someone use to connect to the American
Split-Phase 240 volt system to get 100-110 volt
On Thu, Dec 29, 2011, at 09:44 PM, Peter Blodow wrote:
John Kasunich schrieb:
Note that some equipment that is rated for 100V has that rating
because it is used on 50Hz power. Motors and other inductive
loads that are rated for 120V 60Hz (normal US power) are sometimes
dual-labeled for
This is how I believe the connection will be. Does this seem accurate?
-Original Message-
From: Dave [mailto:e...@dc9.tzo.com]
Sent: Thursday, December 29, 2011 12:46 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Transformer Question
Transformers typically don't
, December 29, 2011 12:46 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Transformer Question
Transformers typically don't care if they are connected between a
neutral
and a hot lead or two hot leads.
Dave
Email had 1 attachment:
+ Transformer Wiring.pdf
50k
Yes that is just in respect to what the transformer is labeled.
Clint
-Original Message-
From: John Kasunich [mailto:jmkasun...@fastmail.fm]
Sent: Thursday, December 29, 2011 1:08 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Transformer Question
That will work just
On 29 December 2011 19:36, Clint Washburn cl...@clintandheidi.com wrote:
I am in the process of building a power supply for my lathe and need a big
transformer for for the powersupply.
Are you sure you need a transformer? You do need one if you want to
ground-reference the servo power, but it
John Kasunich schrieb:
On Thu, Dec 29, 2011, at 09:44 PM, Peter Blodow wrote:
John Kasunich schrieb:
Note that some equipment that is rated for 100V has that rating
because it is used on 50Hz power. Motors and other inductive
loads that are rated for 120V 60Hz (normal US power) are
18 matches
Mail list logo
