That is the way my BP Discovery works. You press the Oh Shit button and
all motion stops but the spindle keeps turning and coolant keep flowing.
You press the spindle up button and the spindle moves to the clear
position. Then you can press the spindle stop button and the spindle and
coolant
Original Message
Subject: [Emc-users] Turning spindle off
From: Farzin Kamangar farzin.kaman...@gmail.com
Date: Thu, February 17, 2011 12:05 am
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Dear EMC users,
I was asked to make
On Thursday, February 17, 2011 10:07:11 am Farzin Kamangar did opine:
Dear EMC users,
I was asked to make the following change in the controller
behaviour. As you know when we want to stop the running program and we
push the stop program button, program stops and
so does spindle from
kil...@bobodyne.com wrote:
Dear EMC users,
I was asked to make the following change in the controller behaviour.
As you know when we want to stop the running program and we push the stop
program button, program stops and
so does spindle from turning. Now the request is: when we stop
Dear EMC users,
I was asked to make the following change in the controller behaviour.
As you know when we want to stop the running program and we push the stop
program button, program stops and
so does spindle from turning. Now the request is: when we stop the program
by pressing the stop
Farzin;
Have you considered using the Pause button (in Axis Display) instead of
Stop.
Also you could retract the tool from the workpiece in the G code before
Stopping
the program.
Hope this helps
Don
On Thu, Feb 17, 2011 at 1:05 AM, Farzin Kamangar
farzin.kaman...@gmail.comwrote: