I am grateful to everyone for helping me.
The solution axis.L.jogaccelfraction IN FLOAT
from Peter C. Wallace
Regards Csaba
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Found the doc for this.
http://linuxcnc.org/docs/html/man/man1/xhc-hb04.1.html
> -Original Message-
> From: Horváth Csaba [mailto:hcs@gmail.com]
> Sent: April-09-20 8:49 AM
> To: Enhanced Machine Controller (EMC)
> Subject: [Emc-users] WHB04 MPG
>
> Dear
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: April-09-20 9:16 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] WHB04 MPG
>
> On Thu, 9 Apr 2020 at 17:15, andy pugh wrote:
>
> > You probably need to
On Thursday 09 April 2020 11:49:28 Horváth Csaba wrote:
> Dear Everyone,
>
> I have a milling machine. To this machine I connected a WXHC-HB04 MPG.
> I need help for the configuration.
> I operate the machine through MESA 7i92+7i33 control card. (Linuxcnc
> 2.9 pre)
> I set up everything. Also
On Thu, 9 Apr 2020 at 17:15, andy pugh wrote:
> You probably need to use ilowpass;
Or, do what Peter just suggested. I wasn't aware of that improvement.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
On Thu, 9 Apr 2020 at 16:52, Horváth Csaba wrote:
> While using MPG, how can I set up acceleration and decceleration in
> configuration (slower acc/decc)?
You probably need to use ilowpass;
http://linuxcnc.org/docs/2.7/html/man/man9/ilowpass.9.html
--
atp
"A motorcycle is a bicycle with a
On Thu, 9 Apr 2020, Horv?th Csaba wrote:
Date: Thu, 9 Apr 2020 17:49:28 +0200
From: "[UTF-8] Horv?th Csaba"
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] WHB04 MPG
Dear Everyone,
I have a mill
Dear Everyone,
I have a milling machine. To this machine I connected a WXHC-HB04 MPG. I
need help for the configuration.
I operate the machine through MESA 7i92+7i33 control card. (Linuxcnc 2.9
pre)
I set up everything. Also the MPG is operating. But if I operate it
through MPG, the axes are