On Wednesday 01 July 2015 07:34:46 Peter Blodow wrote:
> Besides, a you know: Real men write real programs, not documentation.
> Peter
Yes Peter B., all too true. But I generally try to document my output
within the program code itself with comments, some of which might run to
a 10 line paragra
'Zackly. ;-)
Mark
On Wed, Jul 1, 2015 at 7:34 AM, Peter Blodow wrote:
> Besides, a you know: Real men write real programs, not documentation.
> Peter
>
> Am 01.07.2015 11:13, schrieb Mark Wendt:
> > On Tue, Jun 30, 2015 at 9:48 PM, Peter C. Wallace
> wrote:
> >
> >> The 5I25 manual has an exa
Besides, a you know: Real men write real programs, not documentation.
Peter
Am 01.07.2015 11:13, schrieb Mark Wendt:
> On Tue, Jun 30, 2015 at 9:48 PM, Peter C. Wallace wrote:
>
>> The 5I25 manual has an example command line
>>
>>> Some install docs in that 5i25.zip sure would be handy.
>
> Manua
On Wed, Jul 1, 2015 at 1:06 AM, Peter C. Wallace wrote:
>
>
> Peter Wallace
> Mesa Electronics
>
--
All right Peter, I gotta ask. Wotinell is your avatar a picture of? ;-)
Mark
One Man, One Machine, One Computer!
On Tue, Jun 30, 2015 at 9:48 PM, Peter C. Wallace wrote:
>
> The 5I25 manual has an example command line
>
> >
> > Some install docs in that 5i25.zip sure would be handy.
>
Manual? We don't need no steenkin' manual!
We're men. We don't read manuals... ;-)
Mark
--
One Man, One Machine, On
On Wednesday 01 July 2015 01:06:24 Peter C. Wallace wrote:
> On Wed, 1 Jul 2015, Gene Heskett wrote:
> > Apparently not, if no bitfile has been written, its an error.
> >
> > But now it does work, thanks.
[...]
> > motor. Pin 1 it says is e-stop out in most setups. How do I enable
> > that to det
On Wed, 1 Jul 2015, Gene Heskett wrote:
>
> Apparently not, if no bitfile has been written, its an error.
>
> But now it does work, thanks.
>
> IO Connections for P3
> Pin# I/O Pri. funcSec. func Chan Pin funcPin
> Dir
>
> 1 0 IOPort None
> 14 1 IOPort
On Tuesday 30 June 2015 23:48:00 Peter C. Wallace wrote:
[...]
> >> You write .bit files with mesaflash, for a 5I25 you want to make
> >> sure you write bitfiles that have a 5i25_x.bit file name also
> >
> > In this case, it looks like prob_rfx2.bit was the correct file. No
> > errors on the -
On Tue, 30 Jun 2015, Gene Heskett wrote:
> Date: Tue, 30 Jun 2015 23:26:15 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] flashing with mesaflash?
>
> On Tue
e Controller (EMC)"
> > Subject: Re: [Emc-users] flashing
> > with mesaflash?
> >
> > The bit file is what gets written to the board. Don't forget to
> > power cycle your computer after installing. Not reboot, not restart,
> > power cycle. The power cycle
chine Controller (EMC)"
> > Subject: [Emc-users] flashing with
> > mesaflash?
> >
> > I have installed these file from 5i25.zip, into
> > /lib/firmware/hm2/5i25: gene@GO704:/lib/firmware/hm2$ ls -l 5i25
> > total 348
> > -rw-r--r-- 1 root root 340704 Se
On Tue, 30 Jun 2015, Drew Rogge wrote:
> Date: Tue, 30 Jun 2015 18:38:43 -0700
> From: Drew Rogge
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] flashing with mesaflash?
>
&
On Tue, 30 Jun 2015, Gene Heskett wrote:
> Date: Tue, 30 Jun 2015 21:32:48 -0400
> From: Gene Heskett
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] flashing with mesaflash?
>
&g
The bit file is what gets written to the board. Don't forget to power cycle
your computer after installing. Not reboot, not restart, power cycle. The power
cycle is necessary to write the code to the FPGA.
Drew
On 6/30/15 6:32 PM, Gene Heskett wrote:
> I have installed these file from 5i25.zip,
I have installed these file from 5i25.zip, into /lib/firmware/hm2/5i25:
gene@GO704:/lib/firmware/hm2$ ls -l 5i25
total 348
-rw-r--r-- 1 root root 340704 Sep 5 2014 5i25_prob_rfx2.bit
-rw-r--r-- 1 root root 9504 Jan 17 2014 5i25_prob_rfx2.xml
But which is it that I am supposed to write to the
15 matches
Mail list logo