Terry wrote:
I tried to turn one of my screws and watch the screen-
the DRO is much,much greater than the amount the machine
moved.
my .ini file for each axis was copied and pasted
from my old m5i20 .ini file so I doubt that is the problem
Is there somewhere else I could be getting the
Terry wrote:
Hi,
I tried to turn one of my screws and watch the screen-
the DRO is much,much greater than the amount the machine
moved.
It would be helpfull to know what much much is. Put a ruler on the
machine table, move the axis 1 inch by the DRO, and see how much it
moved on the
?
From: tjm...@cableone.net
To: emc-users@lists.sourceforge.net
Date: Sat, 30 May 2009 17:34:52 -0700
Subject: [Emc-users] hm2 encoders
Hi,
I tried to turn one of my screws and watch the screen-
the DRO is much,much greater than the amount the machine
moved.
my .ini file
Terry wrote:
This is the problem line in the servo file
setp hm2_[HOSTMOT2](BOARD).0.encoder.00.scale 2000
this line does not use the .ini file input scale
Chris had the fix below
Maybe a note on this or change the hm2 servo.hal file
to use the ini file or you guys will answer this