by the machine. And work on
lowering the backlash...
Thanks everybody for the help in figuring this out !
On 2/10/14 7:51 AM, emc-users-requ...@lists.sourceforge.net wrote:
Date: Sun, 9 Feb 2014 23:00:31 +
From: andy pughbodge...@gmail.com
Subject: Re: [Emc-users] mesa 5i25, pncconf working
I tried also with 25% more on stepgen_maxvel and maxaccel. Not better.
I checked the enable, it works fine. Pncconf was generating a different
named net. Once fixed at least the axis moves. But I get following
errors and occasional grinding if I increase the MIN_FERROR
I rechecked within
On Sun, 9 Feb 2014, bruno wrote:
Date: Sun, 09 Feb 2014 21:52:52 +0100
From: bruno br...@tinkerbox.org
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] mesa 5i25, pncconf working but not linuxcnc
On 9 February 2014 20:52, bruno br...@tinkerbox.org wrote:
- if I stop the movement and continue in the same direction : no
problem, it will start moving (and stop) smoothly
- if I stop the movement and go jog in the opposite direction, I
immediately get a following error.
This points very
