On Friday 01 June 2018 16:44:25 andy pugh wrote:
> On 1 June 2018 at 21:06, Gene Heskett wrote:
> > The only way I can see to fix it, requires a calibration per tap,
>
> I think I would have already tapped them all by hand.
>
> But then I nearly always do, I don't think I have rigid-tapped more
On 1 June 2018 at 21:06, Gene Heskett wrote:
> The only way I can see to fix it, requires a calibration per tap,
I think I would have already tapped them all by hand.
But then I nearly always do, I don't think I have rigid-tapped more
than half a dozen times.
--
atp
"A motorcycle is a
On Friday 01 June 2018 14:46:52 jeremy youngs wrote:
> On Fri, Jun 1, 2018, 13:20 Gene Heskett wrote:
> > Greetings everybody;
> >
> > I have the grub screw bore & tap working except for on glareing
> > problem. I am using g38.2 to measure both the length of the drill,
> > and the tap, and I had
On Friday 01 June 2018 14:45:15 andy pugh wrote:
> On 1 June 2018 at 19:20, Gene Heskett wrote:
> > IOW, how do you folks deal with this?
>
> Why not do two holes in one operation? They are opposite each other,
> aren't they?
Yes but most of the smaller taps aren't long enough to reach all the
On Fri, Jun 1, 2018, 13:46 andy pugh wrote:
> On 1 June 2018 at 19:20, Gene Heskett wrote:
>
> > IOW, how do you folks deal with this?
>
> Why not do two holes in one operation? They are opposite each other,
> aren't they?
>
> I didn't catch this, I agree do em straight through in one shot .
>
On Fri, Jun 1, 2018, 13:20 Gene Heskett wrote:
> Greetings everybody;
>
> I have the grub screw bore & tap working except for on glareing problem.
> I am using g38.2 to measure both the length of the drill, and the tap,
> and I had set the depth of the tap so it went a little into the opposing
>
On 1 June 2018 at 19:20, Gene Heskett wrote:
> IOW, how do you folks deal with this?
Why not do two holes in one operation? They are opposite each other,
aren't they?
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses,
Greetings everybody;
I have the grub screw bore & tap working except for on glareing problem.
I am using g38.2 to measure both the length of the drill, and the tap,
and I had set the depth of the tap so it went a little into the opposing
hole on the other side of the hat, and still left some