> I got inspiration from these two sites
I ran a quick-and-dirty test on the repeatability of my ugly
tool length probe switch and discovered that it works
surprisingly well:
http://softsolder.wordpress.com/2010/04/17/ugliest-tool-
length-probe-switch-repeatability/
Shorter link: http://wp.me/
On 10 August 2010 07:53, Rudy du Preez wrote:
>
> I wonder if it is possible with
> a touch probe installed to have a probe action programmed after each tool
> change in order to set the new tool length, without using the tool table and
> preset tool holders?
I think it should be possible using a
Hi
I got inspiration from these two sites :-)
http://softsolder.wordpress.com/2010/04/14/emc2-ugliest-tool-length-probe-station-ever/
http://jager.no/projects/emc/reference-tool-length.ngc/view
/Niels
> There was extensive discussions about jogging and tool touching during
> pause
> or tool
There was extensive discussions about jogging and tool touching during pause
or tool change. I did not follow all of it. I wonder if it is possible with
a touch probe installed to have a probe action programmed after each tool
change in order to set the new tool length, without using the tool table
