On 04/22/2021 11:23 PM, andrew beck wrote:
update on encoder splitting to altivar vfd and mesa card
hey guys just a update and a few more questions
so I managed to get the encoder mounted on my spindle and working fine.
the vfd works in closed loop control now and I get quite nice power
On Fri, 23 Apr 2021, andrew beck wrote:
Date: Fri, 23 Apr 2021 16:23:35 +1200
From: andrew beck
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] wiring up mesa ency encoder
update on encoder splitting to
On Sun, 25 Apr 2021 at 12:27, andrew beck wrote:
> I would like to be able to change hal values depending on what a if
> statement says. Basically I want to deactivate my Linuxcnc hal controlled
> spindle ramp of I am rigid tapping. Either by doing a setp on the rate of
> change or swapping
Awesome thanks andy.
I guess everyone is just busy.
Been mucking around with some hal stuff.
I would like to be able to change hal values depending on what a if
statement says. Basically I want to deactivate my Linuxcnc hal controlled
spindle ramp of I am rigid tapping. Either by doing a setp
update on encoder splitting to altivar vfd and mesa card
hey guys just a update and a few more questions
so I managed to get the encoder mounted on my spindle and working fine.
the vfd works in closed loop control now and I get quite nice power control
at almost zero rpm its great actually.
now
On Sun, 25 Apr 2021 at 11:19, andrew beck wrote:
>
> hey are people getting this?
> I just got a email saying it got bounced
It seems to have got through.
> so big question is what value of resistor do i need to bring the volts down
> a bit.
An inline resistor will only work if the current is
hey are people getting this?
I just got a email saying it got bounced
update on encoder splitting to altivar vfd and mesa card
hey guys just a update and a few more questions
so I managed to get the encoder mounted on my spindle and working fine.
the vfd works in closed loop control now and I
Question on that.
My vfd encoder card reads encoder pulses at above 7v and under 5v I think.
My encoder I bought from a company in China which made it for me. It can
do 10k rpm. And accepts 5-24v input. Output just corresponds to whatever
the input value is. So maybe one solution is drop the
On Fri, 16 Apr 2021 at 07:25, andrew beck wrote:
> if manual says I can run up to 13v do you think I will be fine?
I am not PCW, but I would be nervous about 12V with an absolute max of 12.
Maybe you can use one of the tiny buck-converters from eBay to supply
the encoder with 5V (or 8V) from
awesome andy
just checked and the output is 12v
but I also saw that the input can be anywhere from 5-24 v and I think the
output coresponds to the input voltage
thanks
so Peter
if manual says I can run up to 13v do you think I will be fine?
I saw mention of a 5v control voltage needed? where
There are ways of matching data signal voltages between disparate components.
Here's a patent on one way to do it, likely it's the basis for various
commercial products. https://patents.google.com/patent/US7023242
On Thursday, April 15, 2021, 1:45:18 AM MDT, andrew beck
wrote:
Hey
On Thu, 15 Apr 2021 at 04:19, andrew beck wrote:
> looking for info on how to wire up a mesa ency encoder card to my vfd.
Using arcane knowledge (ie, how Mesa manuals are named, and how to
google for them) I found the manual.
http://freeby.mesanet.com/encyman.pdf
That gives an absolute
On Thursday 15 April 2021 03:42:49 andrew beck wrote:
> Hey gene and peter.
>
> Well that's good to know that the ency card only supports 5v. So
> that's a no show. All good I'll use them for something else I guess.
>
> So gene.
> First off my encoder has a b Z push pull single ended outputs.
>
Hey gene and peter.
Well that's good to know that the ency card only supports 5v. So that's a
no show. All good I'll use them for something else I guess.
So gene.
First off my encoder has a b Z push pull single ended outputs.
Looks like your solution is the plan.
I have a spindle sensor
On Thu, 15 Apr 2021, andrew beck wrote:
Date: Thu, 15 Apr 2021 15:15:56 +1200
From: andrew beck
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] wiring up mesa ency encoder
Hey guys
looking for info on how to
On Wednesday 14 April 2021 23:15:56 andrew beck wrote:
> Hey guys
>
> looking for info on how to wire up a mesa ency encoder card to my vfd.
>
> I have a encoder card that outputs 12v to the encoder that I have
> (which is also a 12 v encoder) but would like to split the encoder
> pulses off to
Hey guys
looking for info on how to wire up a mesa ency encoder card to my vfd.
I have a encoder card that outputs 12v to the encoder that I have (which is
also a 12 v encoder) but would like to split the encoder pulses off to my
7i77 as well as back to schiender altivar 71 vfd.
the vfd does
17 matches
Mail list logo