I wish I could get my serial communication problem solved, I currently
can't talk to the hairball at all.
Sounds like your Hairball is damaged. I killed mine once. It would
communicate intermittently, then stopped talking at all. Do you have relay
anti-kickback (snubber, flyback) diodes ac
rian DeLeon"
To: "Iron Mountain Films" , "Electric
Vehicle Discussion List"
Subject: Re: [EVDL] zilla intermitent start up problem
Message-ID:
Content-Type: text/plain; charset=iso-8859-15; format=flowed;
delsp=yes
I had some strange Zilla issues once that turned
I had some strange Zilla issues once that turned out to be noise in the
RPM sensor. The sensor signals weren't being picked up properly so the
controller cut power to the motor after it detected a "stall" caused by a
faulty RPM signal. My EV would move forward a few feet before the Zilla
cu
hicle
Discussion List
Sent: Saturday, April 13, 2013 1:43 PM
Subject: Re: [EVDL] zilla intermitent start up problem
Hello Mike,
This problem also happen to me on my initial startup back in 2003. It read
the code 1231 propulsion pack open. I happen to have two safety contactors
that is place abo
volt rated one.
Roland
- Original Message -
From: "Iron Mountain Films"
To:
Sent: Saturday, April 13, 2013 12:35 PM
Subject: [EVDL] zilla intermitent start up problem
I hope the brain trust on this list can help I am sending all this info to
Manzinita Micro also.
firs
I hope the brain trust on this list can help I am sending all this info to
Manzinita Micro also.
first the good news I am back on the road after almost a year, now with a pack
of 45 CALB CA grey cells. When I can get the car to go it is awesome, which is
most of the time.
On my first attempt
