On Mon, 08 May 2000, Brian Schroeder wrote:
> I provided as little information as I did in the hope that someone would
> recognize my problem and be able to help me, without me swamping the
> list with lots of data. The files are:
What is the problem?, I don't see it mentioned in this post but y
On Tue, 09 May 2000, you wrote:
> Would someone please direct me to online instructions for
> using a Mandrake boot disk on Mandrake 7.0? Even better
> would be instructions here on how to use one.
>
> I just made a boot disk using
>
> mkbootdisk
MUO suggests 'mkbootdisk $(uname -r)'
I cannot find -any- bios info at ABIT's home page
http://www.abit.com.tw All I can find is a link to
their home brew Linux.
I need to get an upgrade to my BX6-2 board,hopefully to fix it
so I can set to boot from the cd and get it to do it.
Am I mis
On 9 May 00, at 11:32, Brian Schroeder wrote:
I'm sure someone will stop me if I'm wrong , but haven't you
asked for named to find your zone file in /etc/etc/named.local? The
directive directory "/etc"; lets you specify your zone files without
a path.
Also according to my docs, you are missi
A search at http://www.drivershq.com comes up with:
http://www.abit-usa.com/html/download.htm
ftp://ftp.abit.com.tw
ftp://ftp.cis.nctu.edu.tw/Vendors/ABIT
http://www.abit.com.tw/english/download/index.htm
I'm sure you'll find it in one of these locations... I have an abit board
myself, and I fo
Asheesh Laroia wrote:
>
> Gabber is a GNOME implementation of the Jabber IM protocol. Information
> about it can be found at gabber.sourceforge.net.
>
> Anyway, has anyone got it to compile? It manages to get through
>
> ./configure
>
> unscarred, but when I type
>
> make
>
> it dies, sayi
On Mon, May 08, 2000 at 22:31 -0700, John Wenger wrote:
> I just made a boot disk using
>
> mkbootdisk
>
> where was taken from the output of uname -a.
That's ok, you might have used 'mkbootdisk $(uname -r)'
> I rebooted from the floppy, and typed "rescue" at the lilo
> prompt, and got t
Russ Pitman wrote:
>
> I cannot find -any- bios info at ABIT's home page
> http://www.abit.com.tw All I can find is a link to
> their home brew Linux.
> I need to get an upgrade to my BX6-2 board,hopefully to fix it
> so I can set to boot from the cd and get it to
I am uneasy not having a boot disk. The problem is taht, instead of a normal
floppy disk I have an LS-120. All the scheems for making boot disk that I have
seen request to format the diskette doomed to be used as boot disk.
So, I'd need to know
1 is it really necessary to fomat the diskette?
I've always been curious as to how many people play around the code for
things such as Apache, PHP, mySQL and others... adding functionality it did
not formerly include, or change the way certain things work... is there
many?
Joseph E. Sheble
a.k.a. Wizaerd
Wizaerd's Realm
Canvas, 3D, Graphics,
On Fri, Feb 18, 2000 at 10:10:44AM -0700, Charles Curley wrote:
-> I have been able to nfs mount the root partition of a computer for over a
-> year with no problems. Recently, power went out, affecting both of the
-> computers involved, causing both to die a horrible death. As I was not
-> around
kaygee wrote:
>
> AMD chips cannot be used in dp configurations although the K7 should be
> able to by this fall when AMD introduces it's 770 chipset.
Do you have anymore info on this chipset (770) or could you direct me to
a website that does?
Thanks, Mike
--
==
Michae
Hi
Does anyone successfully config Mandrake on Dual
PB6 motherboard and have both CPU working (Celeron)?. Please give me some
helps with the installation step. I tried too many time (Flashing new
Bios, reinstall Mandrake..), but it still only recognize only one
CPU.
Thank you so much
Vu Nguyen wrote:
HiDoes
anyone successfully config Mandrake on Dual PB6 motherboard and have both
CPU working (Celeron)?. Please give me some helps with the installation
step. I tried too many time (Flashing new Bios, reinstall Mandrake..),
but it still only recognize only one CPU. Thank
you
As far as I know the only info is that it will support DDR-RAM, Dual
processors, and a 266mhz FSB, and it will debut after the 760 (also from
AMD) which has all of the above but does not support dual processors. I
expect the 770 at the end of 2000 but that's according to the current AMD
roadmap w
Really my dual pentium 2 350 caqn do 2 packets at once in about
10 hrs. :-)
- Original Message -
From: "ptah" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, May 09, 2000 10:04 PM
Subject: Re: [expert] RE: [newbie] A Dual CPU Computer
the new generations of quickcam released under Logitech are not supported
in linux, but the older generation that was released under connectix has
fairly good support. The problem is finding this camera and not paying
through the nose on ebay. Luckily, I found information on Phillips USB
webcams
Hi
Here is the list of my hardware
Motherboard: BP6
CPU: 2 of 500MHz celeron (no
overclock)
Bios: I just flash the new Bios
bp6_qq.b01
96MB Ram (P100)
Trident video card: Trident 3D Image 9880
chipset
No soundcard
No modem
I just set the MPS version control in Bios to
1:1
I installed t
On Tue, 9 May 2000, Russ Pitman wrote:
> I cannot find -any- bios info at ABIT's home page
> http://www.abit.com.tw All I can find is a link to
> their home brew Linux.
> I need to get an upgrade to my BX6-2 board,hopefully to fix it
> so I can set to boot from the cd a
Cool, thanks!
kaygee wrote:
>
> As far as I know the only info is that it will support DDR-RAM, Dual
> processors, and a 266mhz FSB, and it will debut after the 760 (also from
> AMD) which has all of the above but does not support dual processors. I
> expect the 770 at the end of 2000 but that'
Piero wrote:
>
> I am uneasy not having a boot disk. The problem is taht, instead of a normal
> floppy disk I have an LS-120. All the scheems for making boot disk that I have
> seen request to format the diskette doomed to be used as boot disk.
> So, I'd need to know
>
> 1 is it really necessary
I have the 970cxi and it works ok with the generic deskjet drivers with
linux... acutaly i use the 550c driver... awaiting new ones... HP said they
dont and wont support linux at all.
dave
On Tue, 25 Apr 2000, you wrote:
> Do any of you have the Hewlett-Packard DeskJet 972Cse printer? It is a
On Tue, 9 May 2000, Don wrote:
> All of the BIOS updates for all of the ABIT mainboards are located on
> this site.
>
>
> http://www.abit.com.tw/english/download/index.htm
But I see that information too old than this site:
http://www.abit.com.tw/t_chinese/download/index.htm
--
Andrew Lee
[EMA
Submitted 09-May-00 by Vu Nguyen:
| Hi
| Here is the list of my hardware
| Motherboard: BP6
| CPU: 2 of 500MHz celeron (no overclock)
| Bios: I just flash the new Bios bp6_qq.b01
| 96MB Ram (P100)
| Trident video card: Trident 3D Image 9880 chipset
| No soundcard
| No modem
|
| I just set the
24 matches
Mail list logo