Hi,
The CPIA module dies on me on occations and I need to remove and reload it
for it to work again. Most times, I can do this, but sometimes it refuses
to remove the modules because it is busy. Obviously, I have tried the
rmmod -r cpia or rmmod cpia and all related modules. I have removed all
oth
Hi,
The CPIA module dies on me on occations and I need to remove and reload it
for it to work again. Most times, I can do this, but sometimes it refuses
to remove the modules because it is budy. Obviously, I have tried the
rmmod -r cpia or rmmod cpia and all related modules. I have removed all
oth
Well, I have actually bin hit quite a bit of times with the bug. I
treid many things and could not get the corruption to stop. I
finally gave up when it became clear it was a chipset thing. However,
no problems with CDRW, only when I am doing large transfers between these
two drives. So , it is no
the /etc/modules.conf file is correct with with the line for usb.
> alias usb-interface usb-uhci.
>
> If you booted with the usb not enabled this may have changed.
>
> Larry
>
> >
> > >
> > > On Thursday 26 July 2001 20:50, Nima S. Panahi wrote:
> > &
Thursday 26 July 2001 20:50, Nima S. Panahi wrote:
> > Hi,
> > My old motherboard's IDE died, so I replaced it with a new AOPEN AK73
> > PRO(A). On the old motherboard, I used a ZoomCam USB cam with no problems.
> > I just loaded the modules and everything worked. The uh
Hi,
My old motherboard's IDE died, so I replaced it with a new AOPEN AK73
PRO(A). On the old motherboard, I used a ZoomCam USB cam with no problems.
I just loaded the modules and everything worked. The uhci always used IRQ
3 on my old system. Now, basically everything but the motherboard is the
sa
Hi,
I have this problem that has baffled me for a long time and can't seem to
figure out what is going on.
First, it started out that the system worked just fine. I did not change
anything significant but slowly the problem showed up. The server,
suddenly starts giving the message
hda: status tim
I recieved this email at my server for panahi.com. It was sent by server
outside of panahi.com, but labeled as if it was from our domain to our
domain. It seems to be an attack but I cannot figure out an attack on
what. Should I be worried , should I check other logs..? Please help if
you know. I
Rusty Carruth wrote:
> "Nima S. Panahi" <[EMAIL PROTECTED]> wrote:
> > I have had this problem with my mouse and keyboard that I have tried
> > everything with it and still have problems. ...
>
> Can you try the offending hardware on another box? My
> first gu
I have had this problem with my mouse and keyboard that I have tried
everything with it and still have problems. The mouse is configured
correctly, as it is a ps/2 microsoft (no wheel) old school mouse and I
have X and the console setup for it. However, many times it acts erratic,
jumps around and
I have always used the src.rpm files (kernel and GLX) and they work great!
>From my experience, it works with 8.0b2, 8.0b3, 8.0RC1, and the 8.0 final.
Tars work great too and are just as fast as the src.rpm. But I like RPM
and stick with it.
> >
> Look closely, he said he downloaded the "tar" fi
I believe I have a handle on the problem now. I did a complete fresh and
minimal install, without using anything from the second CD except for
kernel source. I then went about recompiling programs and they worked!
infact, I did not have to use kgcc as before and the previously compiled
versions wo
Well, from what I have learned upto this point , you will be just fine as
long as you only install exactly what you need, the least amount from CD
2, as the problem packages seem to be coming from there. Especially,
libsafe WILL mess your system up. Other than that, it should be fine.
Hopefully ma
I tried both. But to not matter! I believe I have found the problem (at
least a big part of it). Among the many reinstalls I did, I did a bare
install with X and KDE and the such. It seemed to actually work then ( I
did not install anything from the second CD except for the kernel source,
at this
I realize this. However, my point is that it was working fine with 2.4.2
before me messing with 8.0. Now, vmware will segment out with 2.4.2 AND
2.4.3 with the 8.0 final. I know it is a VMware problem, but I just want
to know what is going on. If I wanted just push the button and have
things work
I was suspecting that. There is something up with my install? I mean, I
can't even install vmware anymore, the program vmware either hangs or
segments. I have tried many fresh installs to no avail. Other apps that
ran before also segment, even after recompiling , even with kgcc. I just
can't figur
I am using 2.0.3 and the newest release (799).
On Mon, 23 Apr 2001, Andrew Judge wrote:
> take a look at the version of VMware you are running. There are issues with
> some Unix guest OS that were not resolved in 2.0.2 that supposedly are in
> 2.0.3 and 2.0.2 comes with 7.2. There are also pro
Um, I am sorry, I miss read the question. My problem is still the same
though, I cannot install any linux guests under linux host. It hangs at
lilo.
On Mon, 23 Apr 2001, Nima S. Panahi wrote:
> I am have same problem. I cannot, for the life of me, install a new vmware
> machine because
I am have same problem. I cannot, for the life of me, install a new vmware
machine because of the lilo problem. I have not tried grub or to see what
exactly the problem is, since I just kept using the old ones. Oh yeh, the
problem started when I got 8.0beta2 and was there for beta3. Now, with 8.0
Its driving me crazy! Everysince upgrading from 8.0 final from 8.0 beta3,
many applications segmet out where before worked. Its seems that almost
all programs that did not come with 8.0 final segment fault. I have tried
recompiling the ones that I could with kgcc, kg++ and the such. However, I
sti
I installed 8.0b2. Now, konsole opens with fonts all messed up. tops and
bottoms sometimes are missing, letters run itno one another, and it all
looks funky and unusuable. I have tried everything... the weird thing is
that when I run konsole under gnome, its back to normal. Please help as
this is
Hi,
I run a webmail and email system. The only access I want to give is secure
SSL type. I have already setup a SSL based imap, pop3, and webmail system.
However, for the simap and pop3s users, they need smtp . My users are all
over the world and I cannot select access based on network, therefore
me to be charming...
The boots of evil were made for WALKING..
We're watching the big picture friend We know the score
We are a public service... Not Glamour boys..
Not captains of industry.. Not makers of things...
Keep your vulgar money!!!
We are a justice sandwich (No toppings
made for WALKING..
We're watching the big picture friend We know the score
We are a public service... Not Glamour boys..
Not captains of industry.. Not makers of things...
Keep your vulgar money!!!
We are a justice sandwich (No toppings necessary)
Living rooms of Ameri
24 matches
Mail list logo