On Sunday 19 October 2003 11:04 pm, James Sparenberg wrote:
> Ed,
> Probably a number of ways to do this but two quick ones.
> At a command line run "top" (without the quotes) you'll see your swap
> usage there.
>
> Second way as root run "cat /proc/meminfo" (no quotes) and you will
> see the
Hello
Although I can't remember the message on the beginning of boot process, I know
that it says something about swap not being turned on. Later in the boot
process, swap seems to be turned on but I want to be 100%. How can I check
if swap is on? How can I check how much of swap linux is us
Hello
Just to say that I fixed the problems of resizing ext3 partitions with
Partition Magic 8. Linux asks for e2fsck -b 8193 but the correct command
for 4k filesystem is e2fsck -b 32768 in case someone else runs into trouble.
Many thanks
Ed
Want to buy your Pack or Services from MandrakeS
Hello
I was silly enough to use Partition Magic 8.0 to resize my entire linux hard
disk (windows is in another hard disk). The resizing-moving went fine as
far as Partition Magic 8.0 is concerned. On Xp I can see the contents of all
linux partitions using explore2fs. However when I try to boot m
Hello
Many thanks. I did as you have suggested but everytime I issue the command
sudo /usr/sbin/adsl-start, a password is requested.
Thanks
Eduardo
On Sunday 05 October 2003 08:28 pm, Rolf Pedersen wrote:
> Eduardo M. A. M. Mendes wrote:
> > Hello
> >
> > I can only ads
Hello
I can only adsl-start by logging as root. How can I make adsl-start available
for all users? I tried sudousers but no avail (It is more than likely that I
did something wrong but I don't know what).
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www
three terminal sessions. I want to get rid of them.
Many thanks
Eduardo
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
reciated.
Many thanks
Eduardo
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello
Many thanks. I will give a go on hfsplus.
Eduardo
On Thursday 02 October 2003 10:27 am, John Haywood wrote:
> On Thu, 2 Oct 2003 12:02 pm, John Haywood wrote:
> > On Tue, 30 Sep 2003 05:41 pm, Eduardo M. A. M. Mendes wrote:
> > > Hello
> > >
> > > On s
Hi ya
I am running netatalk but I haven't seen anything that allows to mount hfs
volumes on a linux box. However I had no problem to mount the linux volume
on the ibook.
Many thanks
Ed
On Friday 03 October 2003 12:49 am, Alexandre Jacarandá wrote:
> Hi Eduardo!!!
> Do you tr
Hello
On searching the web I came across afpfs that allows me to mount hfs volumes.
Unfortunately afpfs is too old and cannot be compiled at 9.2rc1. Does someone
out there has a solution on how to mount hfs volumes remotely?
Many thanks
Eduardo
Want to buy your Pack or Services from
om a
> > IBook to my linux bok. After that I will say bye to Mac 9.1 and
> > welcome to
> > Mandrake 9.1 ppc.
> >
> > Many thanks
> >
> > Eduardo
> >
> >
> > Want to buy your Pack or Services from MandrakeSoft?
> > Go to http://www.mandrakestore.com
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello
I wonder whether someone out there could give some help with netatalk. I have
no idea how to setup it an use it. I just need to copy some files from a
IBook to my linux bok. After that I will say bye to Mac 9.1 and welcome to
Mandrake 9.1 ppc.
Many thanks
Eduardo
Want to buy your
Hello
I need to back up my entire iBook and wonder whether I could do that using
linux. The iBook takes an internal ip address at my private network. Is
there a way to copy all mac files to a dir in the linux server?
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go t
com_tulip_cb, and configure the
correct Eth+modem with xircom_cb.
My problems are:
* Is this a valid startegy to follow?
* How to do this in Mandrake, and how to do this so that Mandrake
doesn't redectect the "Eth only" card at next boot with kudzu and
destroys everything I
Hello
I had 8.2 running on my Sony laptop but I decided to upgrade to 9.1 (what a
hell, 8.2 works fine and why not 9.1? So I thought).
X server is taking forever to load. After 10 minutes I gave in and used
shutdown the x server. Lots of adding clients and destroying clients showed
up on
Hello
I am having some weird problem with pppoe. Everytime I call adsl-start, the
connections starts but the file /etc/ppp/resolv.conf gets weird nameservers.
I am pretty I enter the right dns servers on /etc/ppp/pppoe.conf (In fact I
check the numbers and they are correct). Does someone ha
Hello
I wonder how I can create a guest account on my computer with a password
(guest, hmmm:-) in which the guest user can only see and copy (with scp) the
files under the home directory (and nothing else).
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http:/
> > I am using ssh-3.2.0.
> > What am I doing wrong?
>
> Ummm, using a non-Mandrake package. We use openssh, not RSA's ssh.
>
Does it mean that I am in trouible for not using Mandrake package? Is there a
workaround (not that one of removing ssh and installing openssh)?
Many thanks
Ed
Want
> SSH is not usually started by xinetd. Try:
> chkconfig --list |grep sshd
It doesn't show anything
>
> Look at which runlevels sshd is turn on. If they are all off, try:
> chkconfig --level 2345 sshd on
>
error reading information on service sshd: No such file or directory
I am using ssh-
Hello
I am really confused with the new xinetd standards. I just want to add sshd
at boot time but I have no idea on how to do it. Any help?
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
sing the other interface and install it as a new printer (all
> > diffferent software).
> >
> >
> >
> >Want to buy your Pack or Services from MandrakeSoft?
> >Go to http://www.mandrakestore.com
> >
> >
--
Eduardo S. Libardi <[EMAIL PROTECTED]>
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello
Although I have written a pdfnup (pdf2ps, ps2pdf and psnup) script for my own
use, I am not happy with the results. The original file has 7 MB and
two-page-per-sheet outcome 30 MB. (These are pdf files - when they are
converted to PS, things go worse). My HP 4100 chokes with the latter.
Hello
I am planning to install postifx in a way that I can create some email
accounts for me and my group. As a big newbie, I have no idea on how to do
that without leaving a huge security problem for all members of my network!
Ok, let me fire the questions:
a) Can I set up postfix so that o
Hello
Many thanks. It worked just fine.
regards
Ed
On Wednesday 27 November 2002 03:45 pm, [EMAIL PROTECTED] wrote:
> On Wed, 27 Nov 2002, Eduardo Mendes wrote:
> > Hello
> >
> > I don' t have access to root and therefore no rights to write anything
> > on
Hello
I don' t have access to root and therefore no rights to write anything on
libs, include etc. In order to run a program I had to compile a specific
lib on my home dir ($HOME/lib and $/HOME/include).
Is there a way to set a variable (or change path etc) so as to make the
program "see"
Hello
I just wonder someone on the list could suggest a very light browser (that
could work via ssh in a snail connection) that could be installed in my home
directory and work on both linux and solaris. I am running lynx right now
but some of options on the web pages don't work.
Many tha
> Your trying to use a ssh version that is too old. ssh v 1.2.33
> (commercial) only supports protocol version 1.x, not 2.0 that is used
> with 3.2.0 ssh.
>
> upgrade your ssh client on the client side.
>
> if regular ssh works, then your remote machine has fallback turned on
> (it will fire up ss
Hi
Many thanks.
1) scp --vv gives:
Executing: host xxx.xxx.xxx.xx, user eduardo, command scp -v -t /home/eduardo/
SSH Version 1.2.33 [sparc-sun-solaris2.6], protocol version 1.5.
Standard version. Does not use RSAREF.
bertie: Reading configuration data /etc/ssh1/ssh_config
bertie: ssh_connect
eduardo@(ip address):/home/eduardo/
I get
Connection closed by remote host.
lost connection
What am I doing wrong?
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello
I am having a problem with 9.0: Mandrkae terminates with my logon session
without any warning or messages. It does that automatically. How can I get
rid of this annoying behaviour?
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.c
Hello
I have just installed Mandrake 9.0 with a secure kernel. My X session always
terminates after some time. Is there a parameter to control how long a X
session stays up? I definitely don't be shutdown from time to time as it is
hapenning right now. I don't even have the time to save wha
Subject: SUID Problems
Date: Fri, 23 Aug 2002 11:08:22 -0400
From: "Eduardo P. Roman O."
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Hi, I need to run a script on my MDK 8.2. but when i try to exec, i need to
get ROOT permission. Who can i get root permision to exec my script wit
Hello
I need to download some pdf files from journal sites but mozilla doesn't
understand GetPDFServlet.
Any/all help would be most appreciated.
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello
Many thanks for the replies.
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello
I have 8.2 running on my Sony vaio notebook but the battery only runs for 25
minutes (it runs for more than one hour with XP). Could someone advise me on
how to set up the configuration so as to save energy as much as possible?
Many thanks
Ed
Want to buy your Pack or Services from M
Hello
Sorry for the newbie question, but I wonder whether someone could tell me how
to use Seagte Tapestor 20GB - Scsi. The drive is working fine; I run the
diag tools from seagate on linux and the test was ok.
I have no idea of:
a) mount the tape and save files to it. Does it make sense?
b
Hi
Same problem here with a Sony VAIO.
Please let know if there is a solution to the problem.
Many thanks
Ed
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, April 03, 2002 4:26 PM
Subject: [expert] RV: irda shutting down failure
> In my laptop
Hi
I have the same problem. I have also complained about that when installing
8.0 on my PC. ctrl+alt+any other console is part of my daily routine!
Things can get worse when using two mice. I am running win4lin on display 2
with a ps2 mouse and KDE on display 1 with a serial mouse. Winlin2-ps
Hello
Has anyone tried CrossOver office on 8.2? I wonder whether it really works.
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi Dianne
"supermount -i -f=/etc/fstab enable" did the trick.
Thank you ever so much.
Regards
Ed
On Tuesday 26 March 2002 08:11 am, you wrote:
> hi
>
> i havent installed 8.2 yet. but i did have problems
> with supermount before and can share my experiences
> with it...1) maybe you can che
Hello
I was crasy enough to try to upgrade from rc1 to 8.2 (I said crasy because
all other attempts ended up in a full install). Fortunately everything
worked except for supermount. It is not working anymore. How can I fix that
manually?
Many thanks
Ed
Want to buy your Pack or Services
Hello
Could someone tell me the steps for using gphoto 2 on 8.1? It needs the
lastest usb lib but I am not sure what to do.
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
; "/dev/mouse1"
> Option "ZAxisMapping" "4 5"
>
> # ChordMiddle is an option for some 3-button Logitech mice
>
> #Option "ChordMiddle"
>
> EndSection
>
>
> Section "ServerLayout"
> Identifier "2"
>
t"
> Identifier "layout1"
> Screen "screen1"
> InputDevice "mouse1" "CorePointer"
> EndSection
>
> Section "ServerLayout"
> Identifier "layout2"
> Screen "screen1&quo
Hello
How can I get the mouse that comes with the notebook working at the same time
with another mouse attached the serial port?
I have installed the serial mouse succesfully but when I reboot the notebook
without it (I chose the option keep configuration - I think I should have gne
for do
ly didn't install it on the MBR.
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Eduardo M. A. M.
> Mendes
> Sent: Sunday, March 03, 2002 11:24 PM
> To: [EMAIL PROTECTED]
> Subject: [expert] Help! No lilo - no nothing!
&
2 if I use the boot diskette (it didn't skip this step).
LM 8.2 is running ok. I can't run Xp since I have no boot diskette for the OS.
How can I fix lilo so as to have a dual boot?
My notebook is Sony VAIO.
Many thanks
Eduardo
Want to buy your Pack or Services from Mandr
On Saturday 23 February 2002 11:07 pm, you wrote:
> On Sat, Feb 23, 2002 at 05:01:37PM -0600, Eduardo M. A. M. Mendes wrote:
> > Hello (again)
> >
> > I wonder whether upgrading 81. to 8.2 beta3 is a easy job. I don't want
> > to lose any data. I remeber that
Hello
Thanks for the help. I will burn both images and test them on the notebook
(if they allow me to do that).
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello (again)
I wonder whether upgrading 81. to 8.2 beta3 is a easy job. I don't want to
lose any data. I remeber that using the upgrade option on 8.1 wasn't a good
choice.
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello
Many thanks.
I did chkconfig --level 3 sharity.init but nothing happens. What kind of
output should I expect?
.
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello
I have a script that needs to be started everytime I boot my linux boot. I
normally start the daemon but issuing the command
/usr/local/sharity/sbin/sharity.init start. How can I include this command
(script) together with the other commands that start at boot time. I would
like to se
Hello
Thanks a lot for all help.
I can now watch DVD movies on my linux box (not illegally as far as I could
understand). The movie I've rent was on widescreen (cinemascope) not in the
whole screen. I guess if it were it would be distorted. Anyway I came to
know that ogle doesn't implemen
thanks
Ed
>
> Good luck
>
> David
>
> -Original Message-
> From: Eduardo M. A. M. Mendes [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, February 20, 2002 3:31 PM
> To: [EMAIL PROTECTED]
> Subject: [expert] DVD (newbie) full scrren
>
>
> Hello
>
>
Hello
I have just bought a dvd drive (12x - I hope this is enough for watching
DVDs) and have some qustions:
a) Is is against the law watching DVDs on linux?
b) Full screen - How to get full screen with ogle? I used Crtl-F but the
movie doesn't cover all the screen. It is just a retangle in th
I upgrade mandrake with the utility to update. and update the kernel to
2.3.8-34.1mdk, and now nothing work. how can i fix this problem. becouse not
have eth0 nothing. To start the system i use a diskette with the kernel.
Somebody may help me.
EPRO
Want to buy your Pack or Services from Ma
Hello
Unfortunately MyMyX doesn't work. It wrecks the command line for good.
Many thanks
Ed
On Sunday 17 February 2002 03:59 pm, you wrote:
> Here it is, very simple, the README says it all.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hi, i want to know if the follow out said some thing wrong ;
[root@epropc root]# df -h
FilesystemSize Used Avail Use% Mounted on
/dev/hda5 9.2G 4.7G 4.0G 54% /
none 62M 0 61M 0% /dev/shm
Segmentation fault
[root@epropc root]#
Why i get Segment
any thanks
Ed
On Sunday 17 February 2002 05:21 pm, you wrote:
> "Eduardo M. A. M. Mendes" wrote:
> > Hi
> >
> > That is funny. I am creating iso image of my files in the lab right now.
> > The only think I did was mount -t smbfs /mnt/share. It worke
ave
>
> On Sun, 2002-02-17 at 14:38, Eduardo M. A. M. Mendes wrote:
> > Hello
> >
> > I found an answer ot make question:
> >
> > mount -t smbfs.
> >
> > Thanks
> >
> > Ed
> >
> > On Sunday 17 February 2002 10:37 am, you wrot
Sridhar Dhanapalan wrote:
>
> Method: the last + 1 = Xtart (Capital 'X') on console, then type the
> number set for gnome!
>
> HTH
>
> >On Sun, 17 Feb 2002 07:45:30 -0600, "Eduardo M. A. M. Mendes"
> >
> ><[EMAIL PROTECTED]> wrote:
>
Hello
I found an answer ot make question:
mount -t smbfs.
Thanks
Ed
On Sunday 17 February 2002 10:37 am, you wrote:
> Hello
>
> I just wonder whether how I could mount a windows 2000 located at my lab pc
> on my home pc running linux.
>
>
> Many thanks
>
> Ed
Want to buy your Pack or S
Hi I try to install kdebase-nsplugins-2.2.1-7mdk.i586.rpm, but i get the
follow error;
error: failed dependencies:
libXm.so.2 is needed by kdebase-nsplugins-2.2.1-7mdk
The question is when i can find that lib ?.
If you can help me, i really apreciate.
Thanks Folks
Want to buy your P
Hello
I just wonder whether how I could mount a windows 2000 located at my lab pc
on my home pc running linux.
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello
Many thanks.
Method 1
startx gnome won't call gnome but a different windows manager.
Method 2
There is no such xtart on my 8.1 Is it part of X?
Ed
On Saturday 16 February 2002 07:54 pm, you wrote:
> On Sat, 16 Feb 2002 18:49:12 -0600, "Eduardo M. A. M. Mendes
Hello
My system is set up not to use the graphic login window (somehow this won't
allow me to use multiple Xs) so I need to call KDE I simply issue the command
startx -- :.0.0 (or 1.0 or 2.0 ...) &. For gnome I have tried startgnome but
there is a problem with display and X won't start. How
Hello
I wonder what is the script that calls dhdcp -H eth0 during boot time. I
need to remove the option -H but I can't find where dhcpd is called.
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello
I use roadrunner as my ISP. During login the hostname is changed from
localhost to computer. Besides that, aline on /etc/hosts chamges from
192.168.1791.1 to 127.0.01. This wrecks my internal network.
Any/all help would be appreciated.
Many thanks
Ed
Want to buy your Pack or Serv
Hello
Although I have no problem to use netscape, kmail, ftp and other network
programmes with roadruuner, there is a couple of things that don't work:
a) ping - it doesn't work. Why?
b) Why does dhpcd changes the computer name from localhost to Computer?
This wrecks my samba. Is there a way o
Hello
I had no problem to install 8.0 and 8.1 on my celeron too. The video card
i810e gave some trouble as far as multiple sessions were required. It
didn't work at on 8.0 but works on 8.1 (one has to change XF86Config though)
without DRI.
I have tried to install fbdev developed by Antonino Da
Hello
The question is pretty much on the subject of this email. If so, how to
use dazzle creator 80 usb on linux (software and hardware issues)?
Many thanks
Éd
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello
I am trying to get a second zip drive to work my system (LM 8.1). The first
device is a parallel zip drive and works fine with ppa. The second one is
connected to scsi card, tekram 390-F. dmesg shows that 8.1 finds the scsi
card and the scsi zip but then the whole thing disappeared (that
vice must be:
> /dev/hdc4
> so
> mount /dev/hdec4 ..(here filesystem, user,etc...) /mnt/zip
> The /mnt/zip is an exemple of course.
> Don't forget do mahe a dir /mnt/zip !!
> Eric MC
>
> On Tue, 15 Jan 2002 19:00:35 -0600
> "Eduardo M. A. M. Mendes" <[E
Hello
I have an atapi (or ide, I am not sure) zip on a dell pc (three scsi disks,
dual processor, ide cd and ide zip). When checking dmesg I've noticed that
Lm 7.2 found the atapi CD but not the Ide (atapi) zip drive. What do I have
to do to access and use the zip drive?
Many thanks
Ed
W
Hi, for some time the df -h command give me a
"Segmentation fault", i have installed Mandrake 8.1
[root@epropc root]#
uname -aLinux epropc 2.4.8-26mdk #1 Sun Sep 23 17:06:39 CEST 2001 i686
unknown[root@epropc root]#
Somebody can help me with that or give me an idea
for what happened
Hello
Everytime I try to issue the command mount /mnt/cdrom the system returns a
segmentation fault. mount -t iso9660 /dev/cdrom /mnt/cdrom works though.
I've also nocited the CDs are not mounted automatically. Why?
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go
Hello
I just wonder whether someone out there has an Intel 810e video card set up
in such a way that multiple Xs are allowed (that is, startx --:0 vt07 and
startx --:1 vt08 work).
Many thanks
Ed
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
y, December 29, 2001 6:29 PM
Subject: Re: [expert] Where did LM 8.1 hide /dev/sda4 (parallel zip)?
> On Fri, 21 Dec 2001 14:50, Tarragon Allen wrote:
> > On Fri, 21 Dec 2001 14:32, Eduardo M. A. M. Mendes wrote:
> [SNIPT]
> > > How can I create /dev/sda4? Or how can
l zip)?
> On Fri, 21 Dec 2001 14:50, Tarragon Allen wrote:
> > On Fri, 21 Dec 2001 14:32, Eduardo M. A. M. Mendes wrote:
> [SNIPT]
> > > How can I create /dev/sda4? Or how can I mount /dev/sda4?
> > >
> > > Many thanks
> > >
> > > Ed
&g
t; > Regards
> >
> > At 14:50 21/12/2001 +1100, you wrote:
> > >On Fri, 21 Dec 2001 14:32, Eduardo M. A. M. Mendes wrote:
> > > > Hello
> > > >
> > > > My parallel zip worked just fine with LM 8.0. Unfortunatley I had
to
> > > >
er 20, 2001 9:42 PM
Subject: Re: [expert] Where did LM 8.1 hide /dev/sda4 (parallel zip)?
> Did the system create any /dev/sda* devices?
> JG
>
> Eduardo M. A. M. Mendes wrote:
>
> > Hello
> >
> > My parallel zip worked just fine with LM 8.0. Unfortunatley I had
Hello
I have been using my zip drive with linux since Caldera 1.3 in 1999. All
zips have the fourth partition. I have to reformat the disk if I want an
ext2 (see mini-howto on zip). You can check that by issuing the command
fdisk /dev/sda and then list the partitions.
As for your questions, t
Hello
My parallel zip worked just fine with LM 8.0. Unfortunatley I had to
upgrade my system to LM 8.1 (I want o to run multiple Xs). I said
unfortunately because LM 8.1 has lots of funny stuff (for instance, ps2
mouse -gpm - is a nightmare!).
I tried to issue the command moutn -t vfat /dev/sd
Hello
I would like to install evolution 1.0 on LM 8.1. Redcarpet won't recognize
8.1 as a supported distro. Could you someone tell me which are necessary
files and from where I can download them?
Does evolution 1.0 allow retrieving emails from POP3 server with SPA (Secure
Password Autheticatio
t;[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, December 07, 2001 2:35 PM
Subject: Re: [expert] Digital Camera HP 318 and linux
> "Eduardo M. A. M. Mendes" wrote:
> >
> > Hello
> >
> > Does HP 318 work 318? Is there any free soft out there that
Hello
Does HP 318 work 318? Is there any free soft out there that allows me to
load the photos?
Kind off topic - How can I have a list of the usd devices connected my pc?
Many thanks
Eduardo
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello
LM 8.0 and 8.1.
Regards
Ed
- Original Message -
From: "Brad Felmey" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, December 05, 2001 5:09 PM
Subject: Re: [expert] Evolution 1.0 - Downloading everything!
> On Wed, 2001-12-05 at 14:47, Edua
Hello
I want to try Evolution 1.0 but I have a dial-up connection at home. It is
129 MB! Is there a way to download the whole thing without using the
installer. I can download the files using some of Windows Pc (arghh!) on
campus and then saving them to a zip disk.
Many thanks
Ed
Wa
Hello
I want to try Evolution 1.0 but I have a dial-up connection at home. It is
129 MB! Is there a way to download the whole thing without using the
installer. I can download the files using some of Windows Pc (arghh!) on
campus and then saving them to a zip disk.
Many thanks
Ed
Wa
Hello
I want to try Evolution 1.0 but I have a dial-up connection at home. It is
129 MB! Is there a way to download the whole thing without using the
installer. I can download the files using some of Windows Pc (arghh!) on
campus and then saving them to a zip disk.
Many thanks
Ed
Wan
Hello
That package is not broken. It is the exactly same one I have used on LM
8.0. I think that the rpm package on LM 8.1 is somehow different.
What do you mean by update?
Many thanks
Ed
- Original Message -
From: "Alexander Skwar" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent
ragon Allen" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, November 20, 2001 11:32 PM
Subject: Re: [expert] Firewall Log Question
> On Wed, 21 Nov 2001 14:09, Eduardo Bencomo wrote:
> > We are in a mixed network, which includes a router Cisco, a 3COM swich
We are in
a mixed network, which includes a router Cisco, a 3COM swich common to the two
networks and a hub where gateway/fire wall linux computer is connected.
One of the network is my company network (192.168.X.X / 255.255.0.0. I am in charge of it) and
the other network belongs to other
We are in a mixed network, which includes a router
Cisco, a 3COM swich common to the two networks and a hub where gateway/fire wall
linux computer is connected.
One of the network is my company network
(192.168.X.X / 255.255.0.0. I am in charge of it) and the other network belongs
to othe
Hi, today my konqueror is freez, when i start it. I Don't understand what
happened. I use Mandrake 8.1.
who know what could be ?
--
Best Regards
EPRO
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
sqwebmail ---> www.sourceforge.net
En Monday 22 October 2001 11:45, ud. escribio:
> Does anyone knows a free web mail for linux ??
>
>
> Julio Rodríguez
> [EMAIL PROTECTED]
> Cel: 58 412 70 10 580
> Charter Communications International Venezuela
> Tel: 58-212-576.60.80
--
Best Regards
EPRO
Wa
d kdebase-nsplugins. You need
> this, in addition to the normal nsplugins rpm. Install the
> kdebase-nsplugins rpm and flash will work.
>
> On Friday 19 October 2001 10:03 am, Eduardo P.Roman O. wrote:
> > Every time i open an web site with use Flash (in every of it flavor),
>
and flash will work.
>
> On Friday 19 October 2001 10:03 am, Eduardo P.Roman O. wrote:
> > Every time i open an web site with use Flash (in every of it flavor),
> > many windows open for try to download the plug in, the thing is , where
> > or how put that plug in to Konquer
Every time i open an web site with use Flash (in every of it flavor), many
windows open for try to download the plug in, the thing is , where or how put
that plug in to Konqueror Browser ?
--
Atte.
EPRO
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
1 - 100 of 144 matches
Mail list logo