Ok. I have tried sending this to cooker list several times and it never
shows up over there.
Here is my computer
Dual Celeron 466, 256 meg ram.
BP6 motherboard, I am not using the HPT66 connectors on the
motherboard, ( waiting till drivers are stable.)
This machine was running Mandrake 6.1
I've experienced quite the same. Mine is 3c509b, and eth0 is failed
to startup. The problem is solved when I add "alias eth0 3c509.o"
in /etc/conf.module.
Hope this help. Maybe, we should wait for Mdk7.1 or Redhat ;-((
-isa-
On Mon, 24 Jan 2000 19:26:13 -0600, you wrote:
| Ok. I have tried
mine does have a line
alias eth0 eepro100
should it have a .o on the end of the module name?
istiqfar wrote:
I've experienced quite the same. Mine is 3c509b, and eth0 is failed
to startup. The problem is solved when I add "alias eth0 3c509.o"
in /etc/conf.module.
Hope this help. Maybe,
On Mon, 24 Jan 2000, Timothy Litwiller wrote:
mine does have a line
alias eth0 eepro100
should it have a .o on the end of the module name?
istiqfar wrote:
No it shouldn't. does it print ok or failed when bringing up the device.
what does ifconfig and route say?
on bootup it printed ok when bringing up eth0
Axalon Bloodstone wrote:
On Mon, 24 Jan 2000, Timothy Litwiller wrote:
mine does have a line
alias eth0 eepro100
should it have a .o on the end of the module name?
istiqfar wrote:
No it shouldn't. does it print ok or failed
well I will try again tomorrow, but this afternoon I put in a pci 3c905
instead of the intel or the isa 3c509 and it work right off the bat, but
since this card is borrowed from a friend and I can't keep it I will attempt
to reconfigure without doing a reinstall.
currently I have
[tim@bcc53