At 00:40 29/04/00 -0500, you wrote:
What i did was remove 1 nic after i confugured it. Add the other, i had 1
509 and a 905 and i think both nics werent recognized or failed.
After the before mentioned procedure they both function well under 7.0 V2.
Regards,
Pieter
Eth0 is set to i/o 300, IRQ 10, eth1 is set to i/o 280, IRQ 11.
This was done with the 3Com DOS utility. PnP was disabled at
the same time. All IRQs are set to legacy in the BIOS, and
PnP support is disabled.
With these cards it's necessary to physically remove power from the card
after
-
From: Greg Gray
To: [EMAIL PROTECTED]
Sent: Saturday, April 29, 2000 12:40 AM
Subject: [expert] dual 3c509 NICs fail on re-boot
This has really got me stumped and frustrated. I am running LM 7.0.2 on an
Intel P133, 64 megs, 2.3 GB in HDDs, Trident 96xx video, SVGA monitor, SB16
sound card
This has really got me stumped and
frustrated. I am running LM 7.0.2 on an Intel P133, 64 megs, 2.3 GB in
HDDs, Trident 96xx video, SVGA monitor, SB16 sound card, and a pair of 3Com
Etherlink III ISA NICs. Performing a clean new install, including
formatting the HDDs, I have no problems