On Monday 17 September 2001 11:00 pm, you wrote:
> I can't help you here specifically, but *make sure* you've disabled all
> unnecessary serial and parallel ports (and other useless motherboard
> peripherals) in the BIOS setup. My feeling is removing the two serial
> ports alone and resetting the
And now there is more, startx burns up completely:
i get a 'failed to initialize kernel module' (which is installed and loaded
without error)
And then it complains about not being able to find any screens, although if i
change XF86Config-4 to use nv as the driver it works fine (for 2d anyway).
On Monday 17 September 2001 12:29 am, you wrote:
> is the card a pci or agp? what slot is it in? it must in the slot next to
> the agp slot, and the network card should not be in the slot next to it or
> next to the isa slots if possible. your BIOS "should" have settings to set
> a certain slot wi
On Monday 17 September 2001 12:03 am, you wrote:
> In the BIOS settings, find the advanced hardware properties. In there,
> there should be an option to disable "IRQ for VGA" (that is, take away the
> video card's IRQ). That's how all my systems are set up, and it works for
> me (tm). Then tell
is the card a pci or agp? what slot is it in? it must in the slot next to the
agp slot, and the network card should not be in the slot next to it or next
to the isa slots if possible. your BIOS "should" have settings to set a
certain slot with a certain irq, but no warranty there. when you say
Another note:
If you don't need serial ports, disable them. You might be able to enable
USB and still disable its IRQ in the BIOS as well. Disable all unneeded
parallel ports. If he doesn't have any devices on the floppy controller
(e.g., I don't have a floppy drive in my system), disable it.
In the BIOS settings, find the advanced hardware properties. In there,
there should be an option to disable "IRQ for VGA" (that is, take away the
video card's IRQ). That's how all my systems are set up, and it works for
me (tm). Then tell it to "Reset ECSD Data" (this clears the IRQ-device
cach
Tom Badran wrote:
>Ok, ive got a mean IRQ conflict on my flatmates machine. We had the same
>problem under winblows that meant he could no longer use the scsi card for
>his zip-drive. Anyway, the network card loads fine, HW address and
>everything, we just cant ping any other local machine.
In the release notes for the most recent 2.4 kernel test version, it
states that PNP OS set to Yes is under development currently.
Generally, I disable that feature regardless of what I install on the
system. Windows tends to get baffled by it, and quitefrankly, I never
even bothered to try it
On Sunday 10 December 2000 17:52, you wrote:
> > > After installing linux my sndcard and my ether stopped working
> >
> > Doing an
> >
> > # lspci -v
> >
> > I find out both devices have irq=0.
> >
> > How do I know which irq are free? and how do i assign a module a specific
> > irq?
> >
> > Than
Basically, your BIOS can provide PnP information, as well as your OS.
Pnp OS Installed is On = BIOS will not provide this info [because Windows prefers
not to receive it, and might get confused because it can see more of your hardware
than the BIOS can, sometimes]
Pnp OS Installed is On = BIOS w
> After installing linux my sndcard and my ether stopped working
>
> Doing an
>
> # lspci -v
>
> I find out both devices have irq=0.
>
> How do I know which irq are free? and how do i assign a module a specific irq?
>
> Thanks
>
>
>
Content-Type:
Move
your sound card to another slot if it is a PCI card.
-JMS
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Julio MatarranzSent: Sunday, December 10, 2000 4:57
AMTo: [EMAIL PROTECTED]Subject: [expert] IRQ
conflict
After installing linux my snd
13 matches
Mail list logo