At 08:26 PM 3/10/03 -0800, you wrote:
>On the note expression (make *sure* it's note-attached and not
>measure-attached)
Yes, okay, now I see it. I keep forgetting that just because the cursor
turns into a note doesn't mean it's note attached. Bad, bad GUI.
Finally it works. I had to erase existi
]
Sent: 3/10/03 8:10 PM
Subject: Re: FW: [Finale] MIDI panning
At 12:19 PM 3/10/03 -0800, Brad Beyenhof wrote:
>Worked fine for me. Are you sure you set the note expression to affect
the
>correct layer on playback? Maybe rather than "Current Layer" you
should
>specify the l
At 12:19 PM 3/10/03 -0800, Brad Beyenhof wrote:
>Worked fine for me. Are you sure you set the note expression to affect the
>correct layer on playback? Maybe rather than "Current Layer" you should
>specify the layer you'd like each expression to affect (just to avoid any
>misinterpretation).
I'm
I just ran an experiment, assigning layer 1 to flute, layer 2 to oboe.
I had the oboe play for 6 bars, panned left using an expression, setting
controller 10 to 0. I had the flute enter at bar 3, panned full right
using an expression. The oboe stayed full left when the flute entered
and the f
Whoops... got sent just to Dennis.
Dennis wrote:
> I have just tried that, since the file was still sitting here open.
>
> Staff 1, Layer 1, Channel 1, Flute, expression "pan left" =
> controller 10
> value 0, note assigned.
> Staff 1, Layer 2, Channel 2, Oboe, expression "pan right" =
> contro
At 02:50 PM 3/10/03 -0500, David H. Bailey wrote:
>The layer/expression issue is easily remedied if the expressions are
>entered as note-expressions, in each layer.
I have just tried that, since the file was still sitting here open.
Staff 1, Layer 1, Channel 1, Flute, expression "pan left" = con
The layer/expression issue is easily remedied if the expressions are
entered as note-expressions, in each layer.
Dennis Bathory-Kitsz wrote:
At 06:48 AM 3/10/03 -0800, Richard Yates wrote:
This is giving me some clues. Opening in Cakewalk showed a couple of tracks
set to pan correctly but the
At 06:48 AM 3/10/03 -0800, Richard Yates wrote:
>This is giving me some clues. Opening in Cakewalk showed a couple of tracks
>set to pan correctly but the layer two tracks are not. Apparently, in the
>instrument list you must also have 'Expressions' set to the same channel as
>the instrument that y
Dennis Bathory-Kitsz wrote:
>> Output a file in .mid format & load to a sequencer.
>>
>> Does data should show the pan info?
>>
>> (File save bypasses output options.)
This is giving me some clues. Opening in Cakewalk showed a couple of tracks
set to pan correctly but the layer two tracks are not.
I have found it very easy to set panning using expressions -- I create
non-printing expressions and set playback for Pan and the appropriate
value. That way I can see exactly where I have placed the expressions
and can change them very easily.
I find this much easier than using the midi tool,
One last thought for tonight:
Do you have an expression assigned to Midi controller 10? This would
override the value just sent.
Dennis
___
Finale mailing list
[EMAIL PROTECTED]
http://mail.shsu.edu/mailman/listinfo/finale
At 09:17 PM 3/9/03 -0800, Richard Yates wrote:
>Dennis Bathory-Kitsz wrote:
>>> Options | Playback Options
>>> Check:
>>> Play Recorded Continuous Data
>
>This is already checked.
Output a file in .mid format & load to a sequencer.
Does data should show the pan info?
(File save bypasses output o
iikura masao wrote:>> Moreover, if you would
like to use the same instrument for several>> channels, you have to
register different instrument name for each>> channel in Instrument
Window, for example, guitar1 for channel 1,>> guitar2 for channel 2,
and so on, but the sa
Dennis Bathory-Kitsz wrote:
>> Options | Playback Options
>> Check:
>> Play Recorded Continuous Data
This is already checked.
Richard
___
Finale mailing list
[EMAIL PROTECTED]
http://mail.shsu.edu/mailman/listinfo/finale
Options | Playback Options
Check:
Play Recorded Continuous Data
Dennis
___
Finale mailing list
[EMAIL PROTECTED]
http://mail.shsu.edu/mailman/listinfo/finale
Moreover, if you would like to use the same instrument for several
channels, you have to register different instrument name for each channel
in Instrument Window, for example, guitar1 for channel 1, guitar2 for
channel 2, and so on, but the same MIDI instrument is used for all the
c
Harold Owen wrote:
>> Richard Yates writes:
>>
>>> I am struggling with the MIDI tool. I am trying to get Finale to
>>> playback one staff right channel and one staff left channel.
>>>
>>> I have followed the manual and selected 'edit continuous data' and
>>> then selected '10. pan' in the View C
Richard Yates writes:
I am struggling with the MIDI tool. I am trying to get Finale to playback
one staff right channel and one staff left channel.
I have followed the manual and selected 'edit continuous data' and then
selected '10. pan' in the View Continuous Data' db. I then selected the
first
I am struggling with the MIDI tool. I am trying to get Finale to playback
one staff right channel and one staff left channel.
I have followed the manual and selected 'edit continuous data' and then
selected '10. pan' in the View Continuous Data' db. I then selected the
first staff and 'set to' = 0
19 matches
Mail list logo
