It was the Generate Parts feature that confused me, and the 3 window
dialog box. At any rate, I will get up to speed at some point and in the
meanwhile I will shut up about this because it's my fault for not taking
the time that I currently don't have to train myself on the new feature.
(which is s
At 10:35 AM 2/19/2007, [EMAIL PROTECTED] wrote:
>I had used the Extract parts feature, and in doing so
>used the Create Parts feature. When I got to the folder where I had
>directed the new parts to go to, I opened them and started doing layouts,
>page turns, etc. and all kinds of wierd behaviours
My shock at the new parts management window in Fin2K7 led me to a series
of gaffs the first time I used it, so here is what I would suggest to get
the deisred result. I had used the Extract parts feature, and in doing so
used the Create Parts feature. When I got to the folder where I had
directed t
shirling & neueweise wrote:
Yes, that's true. that's why I told you that you need to define TWO
sets of regions, and you have to edit them EACH time you change view.
ah so there is no permanence to this, every time you print you have to
make sure the regions are set according to whether you
Yes, that's true. that's why I told you that you need to define TWO
sets of regions, and you have to edit them EACH time you change view.
ah so there is no permanence to this, every time you print you have
to make sure the regions are set according to whether you are
printing parts or score
shirling & neueweise wrote:
Yes it's possible, but No, it's not easy.
david, although i was excited to hear your comments, i don't think this
works, i just tried it. i set up the two regions, and when i opened the
part and redefined the regions, the changes were reflected in the score
as
At 05:26 PM 2/18/2007, Bruce K H Kau wrote:
>I believe that there is really is a upper/lower case arabic number set,
>but it is not used as much these days, mostly because of the computer.
>
>However, the only differences I recall is the "1" is 1/2 size, and looks
>like a short capital "I"; the "0
I believe that there is really is a upper/lower case arabic number set,
but it is not used as much these days, mostly because of the computer.
However, the only differences I recall is the "1" is 1/2 size, and looks
like a short capital "I"; the "0" looks like a lower case "o", and the
"9" was
At 04:04 PM 2/18/2007 -0500, John Howell wrote:
>Actually I don't think Arabic numerals have upper and lower cases.*
>At least they don't on typewriter or computer keyboards. You just
>change the size.
In traditional typsetting, some fonts have separate sizes and widths for
different purposes -
Yes it's possible, but No, it's not easy.
david, although i was excited to hear your comments, i don't think
this works, i just tried it. i set up the two regions, and when i
opened the part and redefined the regions, the changes were reflected
in the score as well.
--
shirling & neuewe
At 8:21 AM -0800 2/18/07, Kim Richmond wrote:
Perhaps this has been covered before, but now that I finally have
MacFin2007c up and running, I'll ask.
Is there a way to have bar numbers different in the score
from the linked parts?
*I want my bar numbers to appear on the parts to be every bar
Kim Richmond wrote:
Perhaps this has been covered before, but now that I finally have
MacFin2007c up and running, I'll ask.
Is there a way to have bar numbers different in the score from the
linked parts?
*I want my bar numbers to appear on the parts to be every bar in
small case below
none of this is possible. please express your grief over this issue
to finale support, it is an unacceptable oversight and needs to be
corrected. the suggestions i sent to them in december would allow
you to do all you are asking.
At 03:16 +0100 12/15/06, shirling & neueweise wrote:
MEAS
Perhaps this has been covered before, but now that I finally have
MacFin2007c up and running, I'll ask.
Is there a way to have bar numbers different in the score from the
linked parts?
*I want my bar numbers to appear on the parts to be every bar in
small case below the bar.
*I want my bar
14 matches
Mail list logo
