I recently installed Fink but am having a problem with my installation. Fink cannot update my package database, so Update fails. Typing sudo apt-get update results in the following (long) error message:
Err file: local/main Packages
File not found
Ign file: local/main Release
Err file
I've heard much discussion that no binaries have been compiled to run
under Jaguar and that those of us running 10.2 must download and
compile source code. I'm a bit confused by this because I did an
archive and install from 10.1.5 to 10.2 and the old binaries run just
fine: Window Maker, GI
I ran Ben's script to fix Apple's X11 libraries. As directed, I ran it
as root. It appears to have fixed some libraries, but even though I
ran it as root, I got quite a few "permission denied" errors. Here's
a clip of the output the script generated:
sh: /usr/X11R6/lib/libXmu.6.2.dylib: Per
I can no longer successfully run fink selfupdate-cvs. When I do, I get
the following error messages (clipped for brevity's sake):
cvs server: Updating 10.2/unstable/main/finkinfo/x11-system
cvs server: Updating 10.2/unstable/main/finkinfo/x11-wm
cvs update: move away
10.2/unstable/main/finkin
Running fink update-all results in Fink attempting to update and
install gnome-libs-1.4.2-5. However, the install fails. Here are the
results:
-- Installing ./html/basic-foo.html
-- Installing ./html/basic-rendering.html
-- Installing ./html/basic.html
-- Installing ./html/fdl-section1.html
--
Mar 2003, Marc Boxerman wrote:
Running fink update-all results in Fink attempting to update and
install gnome-libs-1.4.2-5. However, the install fails. Here are the
results:
-- Installing ./html/basic-foo.html
-- Installing ./html/basic-rendering.html
-- Installing ./html/basic.html
-- Installing
milar problem that happened on a
different package).
On Sun, 23 Mar 2003, Marc Boxerman wrote:
Alexander,
No luck. I rebuilt opensp3 w/o any problems. But I get the same
error
when I update gnome-libs:
-- Installing ./html/index.sgml
/usr/bin/install: ./html/index.sgml: No such file or dire
1.3.2-2 Implementation of DSSSL
i opensp3 1.5-3SGML parser
i opensp3-shlibs 1.5-3Shared Libraries for opensp3
On Sun, 2003-03-23 at 18:29, Marc Boxerman wrote:
Openjade and gtk--doc rebuilt just fine, but I still get the same
error
when Fink tries to make gnome
Alexander,
Thanks for your help. That may have been a stab in the dark, but it
worked:
Unpacking replacement gnome-libs-shlibs ...
Setting up gnome-libs-shlibs (1.4.2-5) ...
Setting up gnome-libs (1.4.2-5) ...
Installing new version of config file /sw/etc/mime-magic.dat ...
On Monday, March 2
Is it possible to get Fink to compile Gimp against gtk+ 2.x instead of
(the default) 1.x?
---
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
___
Thanks, Michèle. Hopefully it will be resolved soon. Yes, Acrobat &
Preview are reliable options, but I was hoping for something compatible
with the Gnome desktop. I'll try gv.
-Marc
On Oct 10, 2004, at 4:34 PM, Michèle Garoche wrote:
Le 10 oct. 2004, à 19:02, Marc Boxerman a
I recently updated Mozilla to the latest release in the unstable tree.
To do this, Fink needed to install freetype2-hinting-shlibs.
Unfortunately, this conflicted with freetype2-shlibs, which was already
installed. I force removed freetype2-shlibs and
freetype2-hinting-shlibs installed fine
How do I get Fink to list all packages that depend on a given package?
I know I've done this before but I've forgotten how. I tried fink
-help, dpkg -help, and list -help but didn't find an answer. I've
probably missed something, but can someone please point me in the right
direction?
Than
For the Superdrive, use dev=IODVDServices.
Note that for cdrecord to communicate with your burner, you must first unmount the burner. An easy way to do this is with disktool:
disktool -u dev#
To find out the device number, issue this command:
disktool -l
Disktool will list each device (hard d
I am trying to compile Gimp2 on a new Tiger system with a fresh Fink
bootstrap install. The compile fails on a gimp-print dependency, which
is odd because the a placeholder package for gimp-print
(gimp-print-shlibs) is installed. There appear to be 2 versions of
this package, only one of whic
My hard drive crashed, so I replaced it and restored my backup to it
(using Carbon Copy Cloner). All is well except I can no longer get any
gtk2 apps to run. Here's the error I get when trying to start
bluefish:
[santorini:/sw/lib] marc% dyld: bluefish can't open library:
/sw/lib/libgtk-x11
3:10 AM, Martin Costabel wrote:
Marc Boxerman wrote:
[]
WARNING: Deprecated multi-line format used for property "patchscript"
at line 9 of
"/sw/fink/dists/unstable/crypto/finkinfo/zssh-1.4-2.info".
This is a sign that your /sw/fink/dists is a symlink not to 10.3 as it
sh
s yet another
broken symlink.
Thanks,
Marc
On Jun 12, 2005, at 1:57 AM, Michèle Garoche wrote:
Le 12 juin 2005 à 07:31, Marc Boxerman a écrit :
My hard drive crashed, so I replaced it and restored my backup to it
(using Carbon Copy Cloner). All is well except I can no longer get
any gtk2 ap
n 12, 2005, at 3:33 PM, Michèle Garoche wrote:
Le 12 juin 2005 à 20:36, Marc Boxerman a écrit :
Now that Martin helped me get selfupdate to work, I tried to
reinstall gtk+2. That package depends on glib2, which is installed,
but apparently broken because reinstall of gtk+2 tripped on it.
.
Thanks.
Marc
On Jun 12, 2005, at 4:59 PM, Marc Boxerman wrote:
fink rebuild glib2 produces the same error:
harset.a -L/sw/lib libiconv.dylib /sw/lib/libiconv.dylib
/sw/lib/libintl.dylib -install_name /sw/lib/libglib-2.0.0.dylib
-compatibility_version 601 -current_version 601.4
gcc
copied or 2) my internal HD was failing long before it
became fatal and the backup reflects data corruption copied from the
internal drive.
-Marc
On Jun 13, 2005, at 12:32 PM, Martin Costabel wrote:
Michèle Garoche wrote:
Le 12 juin 2005 à 23:59, Marc Boxerman a écrit :
fink rebuild glib
artin Costabel wrote:
Marc Boxerman wrote:
[]
ld: Undefined symbols:
_XftCharExists
This could be a broken symlink, too, but a nastier one, because it
points to an existing file, only an older one. Here is how my libXft
stuff looks like in /usr/X11R6/lib:
% ll /usr/X11R6/lib/libXft*
555
I too, of late, have been having trouble running X apps from
Terminal.app. All used to be well until I temporarily switched from
Apple's quartz-wm in rootless mode to Window Maker in full screen
mode. Upon returning to quartz-wm, I get the following error:
[santorini:~] marc% xclock &
[1]
cshrc file.
Marc
On Sep 29, 2005, at 8:00 AM, Alexander K. Hansen wrote:
On 9/29/05, Marc Boxerman <[EMAIL PROTECTED]> wrote:
I too, of late, have been having trouble running X apps from
Terminal.app. All used to be well until I temporarily switched from
Apple's quartz-wm in
1.app. So what did changing window
managers trigger? And why does Apple's X11 trip over localhost:0.0
when XDarwin.app does not?
At least I'm up and running again.
Thanks.
On Sep 29, 2005, at 9:50 AM, Alexander K. Hansen wrote:
On 9/29/05, Alexander K. Hansen <[EMAIL PROTECTED
the only thing i can add is that if i scroll to the END of the man pages
in question, then there is no problem. it seems to be something to do with
quitting midstream.
thanks for your help--matt.
On Thu, 18 Sep 2003, Alexander K. Hansen wrote:
>
> On Thursday, September 18, 2003, at 09:36 AM, M
__
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_
I am now running Panther and have upgraded Fink per the instructions,
which indicate that Fink should automatically recognize that my machine
is running 10.3. However, my fink.conf file still lists my OS has
10.2:
# Fink configuration, initially created by bootstrap.pl
Basepath: /sw
RootMethod
Thanks, Martin. The conf files have been updated. I just ran fink
selfupdate. Fink read packages from the 10.3 tree and is updating
several packages now.
On Nov 6, 2003, at 2:46 AM, Martin Costabel wrote:
Marc Boxerman wrote:
[]
How do I get Fink to realize I'm running Panther?
Run
I'm trying to upgrade gtk+2. The upgrade fails, apparently because
pango1-xft1 (which I currently have installed) conflicts with
pango1-xft2 (upon which the new gtk+2 apparently relies). Here's what
happens:
[santorini:~] marc% fink update gtk+2
sudo /sw/bin/fink update gtk+2
Information
I managed to resolve the pango conflict myself. I just worked
backwards, attempting to manually install each pango1-xft2 file until I
found one not affected by dependencies. It was pango1-xft2-dev. After
that was installed, the other pango1-xft2 packages installed without
complaint, all pang
My last fink selfupdate-cvs appears to have spawned 2 problems.
First, Fink is now having trouble reading my fink.conf file:
[santorini:~] marc% fink update-all
WARNING: Unable to parse the line "unstable/crypto" in
"/sw/etc/fink.conf".
/usr/bin/sudo /sw/bin/fink update-all
WARNING: Unable
Martin:
I doubt this. The update may have introduced the warning, but the
corruption was probably there before. And I don't know who else than
you can have written "unstable/crypto" into this file. The fix is
simple: edit the file and remove the extra line break.
Guilty as charged. I do rememb
3 AM, Martin Costabel wrote:
Marc Boxerman wrote:
[]
Package: system-xfree86
Status: install ok installed
Version: 2:4.3-1
description: [placeholder for user installed x11]
provides: x11, x11-shlibs, libgl, libgl-shlibs, xft2, xft1-shlibs,
xft2-shlibs, rman, fontconfig1, fontconfig1-shlibs,
xfree86-
Has anyone had any luck updating glib2 lately? I can't pull a copy of
glib-2.2.3 off any server. Even the international mirrors fail. I've
been trying for a couple of days.
Thanks.
---
This SF.net email is sponsored by: SF.net Giveback Pr
...
Any ideas?
On Dec 6, 2003, at 1:21 PM, Alexander Hansen wrote:
Have you tried using the Master mirrors?
On Dec 6, 2003, at 2:04 PM, Marc Boxerman wrote:
Has anyone had any luck updating glib2 lately? I can't pull a copy
of glib-2.2.3 off any server. Even the international mirrors
remove any freetype or
freetype2 packages.
--Alex
--On Saturday, December 06, 2003 2:54 PM -0600 Marc Boxerman
<[EMAIL PROTECTED]> wrote:
Alexander,
I was able to grab the proper files and I updated glib2. Fink next
wants
to update gtk+2. But compilation fails, apparently because of pang
Martin,
I gather from your letter to Christopher that rsync provides more reliable access to the updated package descriptions than CVS. Are there any other advantages to making the switch to rsync?
Seems the sourceforge anon cvs server is down right now. You can use
selfupdate-rsync instead. Ac
I've decided to try my hand with Gnome2. I downloaded and compiled
gnome-core, gnome-desktop, and gnome-session, together with necessary
dependencies, from the unstable tree. Compilation was fine. I
modified my .xinitrc file so that there is a line that reads 'exec
gnome-session' (w/o quotes
I'm slowly getting the Gnome desktop to work :). However, installing
gnome-panel fails, apparently because of Perl:
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets $(MAKE)... yes
checking for working aclo
nsen wrote:
Try a selfupdate--there was a missing dependency on xml-parser-pm
which has supposedly been fixed.
--
Alexander K. Hansen
Levitated Dipole Experiment
http://www.psfc.mit.edu/LDX
On Jan 19, 2004, at 4:22 PM, Marc Boxerman wrote:
I'm slowly getting the Gnome desktop to work
Clech wrote:
Look at this http://article.gmane.org/gmane.os.apple.fink.beginners/10300
Le 19 janv. 2004, à 22:59, Marc Boxerman a écrit :
Alexander,
Selfupdate didn't help. Fink said there were no new packages to install. I then tried fink reinstall xml-parser-pm. The resinstall didn
I encountered this same error and found a solution on a Gnome
discussion forum. Make sure you have installed the package
control-center (as well as the dev and shlibs variants). This should
take care of it.
-Marc
MARC J. BOXERMAN
[EMAIL PROTECTED]
[EMAIL PROTECTED] (email & AIM)
I compiled and installed firefox 3 seemingly without issue. However,
I cannot launch the application, as nothing resembling firefox was
installed in /sw/bin. Has anyone else had this problem? Note that I
removed firefox 2 before installing firefox 3.
Thanks,
Marc
--
That did the trick. It launches now.
Thanks, Hanspeter.
Marc
On Jun 9, 2009, at 5:23 AM, Hanspeter Niederstrasser wrote:
> Marc Boxerman wrote:
>> I compiled and installed firefox 3 seemingly without issue.
>> However, I cannot launch the application, as nothing resembli
Updating Gtk+2 fails, even after several selfupdates to grab more
recent packages.
I get the following error(s);
i686-apple-darwin9-gcc-4.0.1: /usr/X11/lib/libXdamage.1.0.0.dylib: No
such file or directory
make[4]: *** [libgdk-x11-2.0.la] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *
XCode 3.0. I didn't realize it was out of date. I'll upgrade and try
again.
Marc
On Jun 11, 2009, at 8:22 PM, Alexander Hansen wrote:
> Marc Boxerman wrote:
>> Updating Gtk+2 fails, even after several selfupdates to grab more
>> recent packages.
>> I get the
Alexander,
I upgraded Xcode and ran the script. GTk+2 compiled without any
problem.
Thanks for your help.
Marc
On Jun 11, 2009, at 8:22 PM, Alexander Hansen wrote:
> Marc Boxerman wrote:
>> Updating Gtk+2 fails, even after several selfupdates to grab more
>> recent package
I have not yet upgraded my Fink installation for Snow Leopard, in part
because I can't make up mind whether to stick with 32 bit or make the
move to 64. I understand that there are at present more packages
available for 32 bit fink than 64 bit. The issue for me is which
packages have been
I am having trouble building mplayer. Here's the last few lines, including the
error messages:
cc -I../libavcodec -I../libavformat -Wdisabled-optimization -Wno-pointer-sign
-Wdeclaration-after-statement -I. -I.. -I../libavutil -Wall -Wno-switch
-Wpointer-arith -Wredundant-decls -O4 -mtune=gen
Martin,
Does that last error you encountered mean that the current binary is not
compatible with the 64-bit architecture?
Marc
On Friday, December 18, 2009, at 05:07PM, "Martin Costabel"
wrote:
>Robert Wyatt wrote:
>> monipol wrote:
>>> On 17/12/2009, at 23:01,
Can anyone help me figure out why Xmame fails to build? Here's where it fails:
Compiling in the unix directory...
mkdir ../../xmame.obj/unix.x11
mkdir ../../xmame.obj/unix.x11/sysdep
mkdir ../../xmame.obj/unix.x11/sysdep/dsp-drivers
mkdir ../../xmame.obj/unix.x11/sysdep/mixer-drivers
mkdir ../../
;
183 #endif
If it would be helpful, I can upload to entire file to a publicly accessible
location.
Thanks,
Marc
On Jan 11, 2010, at 8:29 AM, Alexander Hansen wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 1/10/10 6:08 PM, Marc Boxerman wrote:
>> Can anyone help
I cannot get ffmpeg to build. I get the following error:
libx264.c: In function 'encode_nals':
libx264.c:60: warning: implicit declaration of function 'x264_nal_encode'
libx264.c: In function 'X264_init':
libx264.c:165: error: 'x264_param_t' has no member named 'b_bframe_adaptive'
libx264.c:167:
Hanspeter:
I suspected that the issue is I'm running Fink in 64 bit.
The output of 'fink list x264' indicates I have some uninstalled packages:
Information about 9097 packages read in 0 seconds.
i libx264-57-shli 0.0.2007121 Encoding H264/AVC video streams
i libx264-85-shli 0.0.2010021
Hanspeter:
Actually, I did get libx264gtk57-shlibs to install. The problem is x264:
Reading buildlock packages...
/sw/bin/dpkg-lockwait -i
/sw/fink/dists/unstable/main/binary-darwin-x86_64/libs/x264_0.0.20071214-4_darwin-x86_64.deb
(Reading database ... 108964 files and directories currently in
64 bit version of Fink. I'm
afraid of downgrading this package for fear of messing up the mplayer install.
Marc
On Jul 15, 2010, at 8:59 PM, Hanspeter Niederstrasser wrote:
> On 7/15/10 8:42 PM, Marc Boxerman wrote:
>> Hanspeter:
>>
>> I suspected that the issue is
Inkscape fails to build on my 10.9 system. Can anyone help me out?
Package manager version: 0.36.0
Distribution version: selfupdate-rsync Sun Nov 17 11:04:04 2013, 10.9, x86_64
Trees: local/main stable/main
Xcode.app: 5.0.2
Xcode command-line tools: 5.0.1.0.1.1382131676
Below is a (long-ish) cop
Thanks, Jack. Running fink selfupdate still returns inkscape-0.48.4-8. I
suppose it is best to sit tight until 0.48.4-9 is validated, at which point it
will be added to the proper Fink tree? Or is there a way for me to grab the
update now?
Best,
Marc
___
From: Jack Howarth
S
package?
Thanks,
Marc
On Nov 19, 2013, at 10:38 PM, Alexander Hansen
wrote:
> On 11/19/13 8:33 PM, Marc Boxerman wrote:
>> Thanks, Jack. Running fink selfupdate still returns inkscape-0.48.4-8. I
>> suppose it is best to sit tight until 0.48.4-9 is validated, at which point
ll be some time before I
know if it builds correctly. But at least fink sees the updated package now.
Thanks, Alexander.
Marc
On Nov 19, 2013, at 11:00 PM, Alexander Hansen
wrote:
> On 11/19/13 8:56 PM, Marc Boxerman wrote:
>> Alexander,
>>
>> your link points to 4 fi
mboxerman$
On Nov 19, 2013, at 11:00 PM, Alexander Hansen
wrote:
> On 11/19/13 8:56 PM, Marc Boxerman wrote:
>> Alexander,
>>
>> your link points to 4 files. I put all of them in
>> /sw/fink/dists/10.7/stable/main/finkinfo/graphics/
>>
>> I then ran fi
;
>> On 11/19/13 9:38 PM, Marc Boxerman wrote:
>> Good news and bad news. As noted, fink is now trying to build 0.48.4-11.
>> The new issue is with dependencies. Are audiofile, esound, and
>> gnome-desktop really needed? At any rate, fink is tripping on anot
PM -0600, Marc Boxerman wrote:
>> Good news and bad news. As noted, fink is now trying to build 0.48.4-11.
>> The new issue is with dependencies. Are audiofile, esound, and
>> gnome-desktop really needed? At any rate, fink is tripping on another
>> dependency: ghos
gt; instead? Does the prompt become...
>
> (1) texlive-base: Base programs for a TeX Live installation
> (2) texlive-nox-base: Base programs for a TeX Live installation
>
> instead?
> Jack
>>
>> On Nov 20, 2013, at 8:24 AM, Jack Howarth wrote:
>&g
n Nov 21, 2013, at 8:28 AM, Jack Howarth wrote:
>
>> On Wed, Nov 20, 2013 at 11:24:19PM -0600, Marc Boxerman wrote:
>> Jack,
>>
>> I edited devel/po4a.info as you suggested. It did not change the prompt:
>>
>> fink needs help picking an alternative to
I too quickly called for help. I discovered a problem with my Xquartz install.
I was missing the symlink from /usr/x11 to /opt/x11. Reinstalling Xquartz
solved the problem.
Marc
--
New Year. New Location. New Benefi
fink list -o shows freeglut as out of date. However, I cannot update it, as I
immediately encounter a dependency error with x11-dev:
Rhodes:~ mboxerman$ fink update freeglut
Password:
Information about 9944 packages read in 5 seconds.
Can't resolve dependency "x11-dev" for package "freeglut-2.8.
I am trying to update to libidn 1.32.-3 but get the following error:
Can't resolve dependency "system-java-dev (>= 1.5-1)" for package
"libidn-1.32-3" (no matching packages/versions found)
Exiting with failure.
I have Java 8 Update 60 installed, which is the current version. I’m running
OS X 10
Installing the JDK did the trick. Thanks, Alexander.
> On Sep 12, 2015, at 6:07 PM, Alexander Hansen
> wrote:
>
>
>> On Sep 12, 2015, at 14:48, Marc Boxerman wrote:
>>
>> I am trying to update to libidn 1.32.-3 but get the following error:
>>
>>
I upgraded to Xcode 8 on a machine running El Capitan. It does not appear that
Apple released an updated set of command line tools for the newest version of
Xcode, at least not for OS X 10.11. The mismatch in versions between Xcode and
the command line tools is causing build failures. Should
gt; On Oct 8, 2016, at 10:37, Marc Boxerman wrote:
>>
>> I upgraded to Xcode 8 on a machine running El Capitan. It does not appear
>> that Apple released an updated set of command line tools for the newest
>> version of Xcode, at least not for OS X 10.11. The mismatch in
I'll have to live with it. I'm running a 2008 Mac Pro so I can't install
Sierra.
Sent from my iPhone
> On Oct 12, 2016, at 11:01 AM, Alexander Hansen
> wrote:
>
>
>> On Oct 12, 2016, at 08:56, John Wiggins wrote:
>>
>> My experience was I needed to update to MacOS 10.12 (Sierra) before Xc
I cannot update openmpi. Here’s the output immediately before and at the error:
-I/sw/include
/sw/bin/flag-sort: /usr/bin/clang -DHAVE_CONFIG_H -DOMPI_BUILDING=1 -O3
-DNDEBUG -fno-strict-aliasing -DHAVE_ROMIOCONF_H -MT
adio/ad_nfs/ad_nfs_features.lo -MD -MP -MF
adio/ad_nfs/.deps/ad_nfs_feature
sen
> wrote:
>
>
>> On Nov 18, 2016, at 21:08, Marc Boxerman wrote:
>>
>> I cannot update openmpi. Here’s the output immediately before and at the
>> error:
>>
>> -I/sw/include
>> /sw/bin/flag-sort: /usr/bin/clang -DHAVE_CONFIG_H -DOMPI_BUI
:33 PM, Alexander Hansen
> wrote:
>
>
>> On Nov 20, 2016, at 16:46, Marc Boxerman wrote:
>>
>> You’re right. Fink updated openmpi and openmpi-shlibs together. Fink will
>> not let me update openmpi without also updating openmpi-shlibs. I tried
>> up
>> wrote:
>>
>>
>>> On Nov 21, 2016, at 22:37, Marc Boxerman wrote:
>>>
>>> Alexander,
>>>
>>> The build still failed using fink -l build openmpi. I’m not sure what you
>>> mean by the output getting “swallowed” bu
That indeed was the case. All is well now.
Thanks for all your help.
Marc
> On Nov 22, 2016, at 11:52 AM, Alexander Hansen
> wrote:
>
>
>> On Nov 22, 2016, at 09:50, Marc Boxerman wrote:
>>
>> Thanks, Alexander.
>>
>> I logged off all other use
On a lark, I rebuilt mplayer to see if it checks for Apple Remote. Sure
enough, it does. Curiously, fink finds Apple Remote present:
Checking for POSIX select() ... yes
Checking for audio select() ... no
Checking for gettimeofday() ... yes
Checking for clock_gettime() ... no
Checking for gl
I get several “all recursive” errors when building Openmpi. Any suggestions as
to resolve this?
w/src/fink.build/openmpi-1.10.6-2/openmpi-1.10.6/ompi/mca/io/romio/romio/adio/include
-I/sw/src/fink.build/openmpi-1.10.6-2/openmpi-1.10.6/opal/mca/event/libevent2021/libevent
-I/sw/src/fink.build
I get the same error when launching mplayer as well. The error occurs
regardless whether one tries to run mplayer in the background:
Rhodes:mac video library mboxerman$ mplayer -fs "New Order 3 16"
MPlayer 1.3.0 (Fink Project)-4.2.1 (C) 2000-2016 MPlayer Team
224 audio & 451 video codecs
Can't i
> On Jun 19, 2017, at 7:05 AM, Hanspeter Niederstrasser
> wrote:
>
> On 6/18/17 8:38 PM, Marc Boxerman wrote:
>> On a lark, I rebuilt mplayer to see if it checks for Apple Remote. Sure
>> enough, it does. Curiously, fink finds Apple Remote present:
>> Check
Alexander,
Very odd: I set the maximum number of simultaneous build jobs to 1 and openmpi
compiled.
Thanks,
Marc
> On Jun 19, 2017, at 9:18 AM, Alexander Hansen
> wrote:
>
>
>> On Jun 18, 2017, at 18:16, Marc Boxerman wrote:
>>
>> I get several “all r
seems to
build each package sequentially.
Thanks again for your assistance.
Marc
> On Jun 20, 2017, at 10:34 AM, Alexander Hansen
> wrote:
>
>
>> On Jun 19, 2017, at 22:57, Marc Boxerman wrote:
>>
>> Alexander,
>>
>> Very odd: I set the maximum
84 matches
Mail list logo