Ben Hines wrote:
Several people explained what you did wrong, but you didn't hear them
apparently. You can't just remove files installed by fink. If you
manually remove something, fink will think you have it installed still,
and you will have to "fink reinstall" it. Fink's xaw3d package insta
i just installed a g4/500/DP (brand new 10.2.2 after formatting) with
fink (cvs).
works, but the x-server crashes very frequently (like, every
15-30min). "never" happens on the imac or my titanium. oroborusx or
standard xdarwin. local and remote processes.
Fink does have "standard xdarwin"
On Wednesday, November 20, 2002, at 08:49 PM, Michael Baudis wrote:
hi,
1.
i just installed a g4/500/DP (brand new 10.2.2 after formatting) with
fink (cvs).
works, but the x-server crashes very frequently (like, every
15-30min). "never" happens on the imac or my titanium. oroborusx or
sta
We don't support use of experimental.
Its in the experimental cvs module which you can check out from sf cvs. If you know what that means, you can use it.
-Ben
On Wednesday, November 20, 2002, at 09:02 PM, [EMAIL PROTECTED] wrote:
Thank you for your reply.
I cannot locate the MrProject info/pa
Thank you for your reply.
I cannot locate the MrProject info/patch files in the cvs. Could you tell me how to obtain them? Also, is it possible to enable the experimental tree in fink.conf?
Thank you,
B.Venkat
In a message dated 11/21/02 9:37:40 AM, [EMAIL PROTECTED] writes:
We have a fink
hi,
1.
i just installed a g4/500/DP (brand new 10.2.2 after formatting) with
fink (cvs).
works, but the x-server crashes very frequently (like, every 15-30min).
"never" happens on the imac or my titanium. oroborusx or standard
xdarwin. local and remote processes.
2.
before that, the same ma
On Wednesday, November 20, 2002, at 03:35 PM, Pejvan BEIGUI wrote:
Alwyn wrote :
I think the problem was that we we had manually deleted the xaw3d
> software in /usr/X11R6/lib without uninstalling it in Fink;
> thus Fink assumed it was still installed.
well, it's not that neither, because i
On Wednesday, November 20, 2002, at 02:19 PM, [EMAIL PROTECTED] wrote:
Mac OS X 10.2/Darwin 6.2 with Oroborosx and Fink
I tried to compile and install MrProject 0.7 with the configure flags --prefix=/sw/ but the application dies on startup with a bus error and I get the following in the error lo
At 12:03 AM +0100 11/21/02, Martin Costabel wrote:
It doesn't download, because this packages-0.4.1.tar.gz already
exists in /sw/src. You must have downloaded it earlier. Have a look
at it using "file", for example, or open it in some editor, to see
what it is. You probably need to remove it a
Jeep Hauser wrote:
[]
I will now download the package descriptions for Fink 0.4.1 and update the
core packages. After that, you should update the other packages using
commands like 'fink update-all'.
tar -xzf packages-0.4.1.tar.gz
It doesn't download, because this packages-0.4.1.tar.gz already
Alexander Hansen wrote:
I'd assume not--there's really not much that happens in that case: you
don't build the deb file, or maybe you don't finish a postinstall
script. The problem you had was a missing dependency: a package
depended xaw3d, but didn't have an explicit statement about the fact i
David Zelman wrote:
I already sent this to fink beginners and got no useful replies. Maybe
someone here can help?
AFAIR, you got a reply to which you didn't react.
All I want is XChat. it has dependencies that are dependenet on things
that trickle all the way down to passwd. When passwd t
I already sent this to fink beginners and got no useful replies. Maybe
someone here can help?
All I want is XChat. it has dependencies that are dependenet on things that
trickle all the way down to passwd. When passwd tries to install I get the
following:
% sudo dpkg --configure passwd
Pas
Mac OS X 10.2/Darwin 6.2 with Oroborosx and Fink
I tried to compile and install MrProject 0.7 with the configure flags --prefix=/sw/ but the application dies on startup with a bus error and I get the following in the error logs:
Date/Time: 2002-11-20 21:52:42 +0530
OS Version: 10.2.2 (Build 6F21
Hey folks,
I'm trying to make sure I've got the latest, but when I run fink
selfupdate (not cvs), I get the output below. The tar & error
messages appear immediately after the "I will now download...",
hinting that nothing is downloaded at all.
It fails similarly for options 2 and 3 as well.
On Wednesday, November 20, 2002, at 09:57 pm, Alexander Hansen wrote:
The problem you had was a missing dependency: a package
depended xaw3d, but didn't have an explicit statement about the fact in
its .info file.
I think the problem was that we we had manually deleted the xaw3d
software in
I'd assume not--there's really not much that happens in that case: you
don't build the deb file, or maybe you don't finish a postinstall
script. The problem you had was a missing dependency: a package
depended xaw3d, but didn't have an explicit statement about the fact in
its .info file.
On Wed
Well, if the packages were set up correctly by the maintainer, then you
wouldn't have a package installed unless its dependencies were.
As a quick way to check where the crash occurred check in /sw/src:
there will be directories for packages for which you have had crashes or
interrupted builds (u
Martin Costabel wrote:
Alexander Hansen wrote:
Do you have libxaw3d installed? If you don't, then install it.
And even if fink thinks you have it installed, reinstall it.
Whenever you remove /usr/X11R6 manually, you need to reinstall xaw3d and
xaw3d-shlibs.
OK Thanks, I had to reinstall t
Asked this question a while ago but no one seemed
responding. Also a related question: how does the font
server work in Fink? I mean in Linux I have a process
xfs listening for all the font requests. How does this
map to X in Fink?
Appreciate any hints on these, really.
> Just installed xfree86-b
Alexander Hansen wrote:
My recollection is that the passwd package is the one that has you
create all of the extra users. Check and see if passwd got installed.
If it did, then try 'fink reinstall passwd'.
In any case, once you've gotten passwd installed properly (all the extra
users, etc) then
It's actually in a separate package. Just install the libxaw3d
package. There must be a missing dependency on xaw3d.
On Wed, 2002-11-20 at 14:14, Pejvan BEIGUI wrote:
> > Do you have libxaw3d installed? If you don't, then install it.
>
>
> In fact, it seems that this lib is missing, you're ri
Alexander Hansen wrote:
Do you have libxaw3d installed? If you don't, then install it.
And even if fink thinks you have it installed, reinstall it.
Whenever you remove /usr/X11R6 manually, you need to reinstall xaw3d and
xaw3d-shlibs.
--
Martin
Do you have libxaw3d installed? If you don't, then install it.
In fact, it seems that this lib is missing, you're right.
But it's supposed to be in the xfree packages right ?
Should I reinstall every xfree package ?
Cheers,
Pejvan
---
Th
Justin Hallett wrote:
rebuild libxine, looks like the plugins didn't get built for some reason.
Thanks.
Rebuilding and reinstalling the package did solve the problem !
Pejvan
---
This sf.net email is sponsored by:
Battle your brains agains
My recollection is that the passwd package is the one that has you
create all of the extra users. Check and see if passwd got installed.
If it did, then try 'fink reinstall passwd'.
In any case, once you've gotten passwd installed properly (all the extra
users, etc) then 'fink install sawfish' s
hi,
I ran into the following error while trying to update gnupg... is this
a common problem?
I could probably correct this error myself if I had enough time to look
at the sources... but has anyone else already dealt with this?
thanks for any hints
alex
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -
Hi again,
I have had a weird and stupid crash while installing sawfish and it's 34
dependencies : the terminal.app had crashed when I came back home, and I
remembered that before leaving, I was asked if i wanted to have other
users such as postgres and some others to be created.
now that I chec
rebuild libxine, looks like the plugins didn't get built for some reason.
[EMAIL PROTECTED] writes:
>Anyone can suggest me some tips ?
-=[JFH] Justin F. Hallett
-=[JFH] Rendek Communications Inc.
-=[JFH] [EMAIL PROTECTED]
---
This sf.net
Do you have libxaw3d installed? If you don't, then install it.
On Wed, 2002-11-20 at 13:28, Pejvan BEIGUI wrote:
> Hi,
>
> I've spend quite a lot of time removing my XonX/Xfree.org binary install
> and install the xfree-threaded from fink, in order to try out xine ;-)
> But since i've done so I
Hi,
I've spend quite a lot of time removing my XonX/Xfree.org binary install
and install the xfree-threaded from fink, in order to try out xine ;-)
But since i've done so I have some issues :
gv wont launch anymore :
> [7:24:03pm] _pejvan_ ~ >> gv
> dyld: gv can't open library: /usr/X11R6/lib/li
Hi,
this morning I've updated fink on 10.2.2 vi 'selfupdate-cvs' and then
fink update-all. Then I've tried to install nessus but failed with
$ sudo fink install nessus-common-nox
Information about 1757 packages read in 0 seconds.
pkg nessus-common-nox version ###
pkg nessus-common-nox version
I was looking at Gerben Wierda's TeX page (http://www.rna.nl/tex.html),
and saw that the current version of his distribution uses Ghostscript 7
under Jaguar.
Are there plans to move fink's TeTeX to GS 7?
Somebody on the list (I don't remember whom)modified the .info file for
system-ghostscript
*This message was transferred with a trial version of CommuniGate(tm) Pro*
Hello,
When I launch a printing since xdvi, the manager of windows of kde3
crash. I use MacOSX 10.2.2 with XFree86 4.2.1.1 and kde3.0.7-3.
Somebody has a solution?
Thank you in advance
Saïd GUELLAL
-
[EMAIL PROTECTED] wrote:
Hi folks:
I've started using numeric-atlas python, and pymol has a dependency on
numeric rather than numeric-atlas. I changed it by hand but this
causes self-update to fail.
Could someone please change the dependency of pymol to numeric |
numeric-atlas or better y
35 matches
Mail list logo
