Hi Eric,
If equivalent functionality can be acheived using the existing synchronous
detector, then great.
I'd also add to your list:
4. The ability to independently change the lower & upper lock-limit
frequencies.
5. Visual indication on the display of the lower & upper lock-limit
frequencies.
No. The Delta 44 that we ship is an OEM version. It comes with the PCI
card, the breakout box, and a cable to connect the two. We recommend
downloading the latest driver from www.m-audio.com. If you have more
questions when setting up the Delta 44, make sure to take a look at the
Delta 44 Quick
Yes. My apologies for not posting this yesterday. There dangerous part of
the transitional issues has been addressed. However, we're still working
out some transitional problems with RX getting into the TX line and vice
versa. You are safe to operate with the FireBox again though. Have fun.
>
> -- next part --
> An HTML attachment was scrubbed...
> URL: /pipermail/flexradio_flex-
> radio.biz/attachments/20060912/eb26122f/attachment.html
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.bi
soundcard.
Thanks,
Andy
G1JVY
-- next part --
An HTML attachment was scrubbed...
URL:
/pipermail/flexradio_flex-radio.biz/attachments/20060912/eb26122f/attachment.html
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http
Can anyone pass along any successful tricks to minimizing the junk at -11KHz?
I know it's dc hum, but what has worked for folks out there?
thanks
Phil K3TUF FN10we
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/li
DR SVN compared to
> 1.6.2, is this correct? I have checked all the settings and they look the
> same between the two versions. I am using a Firebox for the soundcard.
>
>
>
> Thanks,
>
> Andy
>
> G1JVY
>
> -- next part --
> An
gt;
> -- next part -- An HTML attachment was
> scrubbed...
> URL: /pipermail/flexradio_flex-
> radio.biz/attachments/20060912/eb26122f/attachment.html
> ___
> FlexRadio mailing list
> FlexRadio@flex-radio.biz
>
Dave:
You should have been around when we stopped putting these weekly builds
on the web site and started using svn and putting up daily (hourly?)
builds. I thought I was going to stop singing tenor and become a
soprano singing falsetto and all quite unwillingly.
;-).
You are right. svn is
dcard.
>
>
>
> Thanks,
>
> Andy
>
> G1JVY
>
> ------ next part -- An HTML attachment was
> scrubbed...
> URL: /pipermail/flexradio_flex-
> radio.biz/attachments/20060912/eb26122f/attachment.html
> ___
Is there any way to increase the size of the console? Have a large LCD
screen and would like to make it larger.
If I pull out sides it only pulls out so much of the console the rest is
open space.
Thanks
Scott
___
FlexRadio mailing list
FlexRadio@fle
y
>
> G1JVY
>
> -- next part --
> An HTML attachment was scrubbed...
> URL: /pipermail/flexradio_flex-
> radio.biz/attachments/20060912/eb26122f/attachment.html
> ___
> FlexRadio mailing list
> FlexRadio@f
The only way that I have found it possible to make the console larger is to
change the setting of your monitor. I agree with Scott, it would be nice if
you could just drag it out. 73, Hank - K9LZJ
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Scott
S
Resizing a console with as many controls as ours has is not a trivial
matter. Especially when you add in the fact that some people run in 96dpi
mode and others run in 120dpi (or even 140dpi now with some newer laptops).
The only way you can "resize" the screen currently is to change your
resoluti
I've been banging my head against a wall all day, on and off, trying to
get my SDR1000 to transmit...
OK, so, Tune, CW, SSB - no go. The power meter in V1.6.2 and the latest
svn both show 0.00W when I try to transmit. The power meter between the
SDR1000 and the dummy load shows 0W and there's
When the display reads 0.00W, this means that you have it setup for a 1W
unit (no 100W PA). Use the Setup Form to enable it.
If you still can't get any drive, then check the VAC settings.
Eric Wachsmann
FlexRadio Systems
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PRO
Hello David,
I believe the power sensor is on the 100 Watt Power
Amplifier board, so if you do not have the PA, it
cannot read the sensor.
The PA is a nice accessory and I recommend it.
The ATU is nice, but for a home station, I would
probably get an external ATU so that I could use
it with othe
David, are yoy sure you have not the "Receive Only" option checked
(Setup/General/Hardware Config/Receive Only)?
If this is the case, the "Tune" button should be Grayed out.
Check also the Tune Power setting in the Transmit tab.
David Ackrill escribió:
> I've been banging my head against a wa
I've gotten into the habit of downloading the
latest SVN before turning it on each time.
Watta radio!
Mike - AA8K
Robert McGwier wrote:
> Dave:
>
> You should have been around when we stopped putting these weekly builds
> on the web site and started using svn and putting up daily (hourly?)
After playing with the software I find that RapidSVN and ESVN are pretty
easy to use. Both visual SVN packages that can be installed from the
Synaptics software manager.
The script that are added to Nautilus I was not able to get it to work,
nothing shows up other than the regular items when you r
Is he SVN server down at this moment?
On Tue, 2006-09-12 at 20:41 -0500, Cecil KD5NWA wrote:
> After playing with the software I find that RapidSVN and ESVN are pretty
> easy to use. Both visual SVN packages that can be installed from the
> Synaptics software manager.
>
> The script that are adde
Hi Eric,
That's correct, I do not have a 100W PA. This is the QRP unit.
I don't use VAC and, if I try to enable it, I get an error saying
"Unanticipated Host Error".
I'm trying to get the rig to transmit in CW/Tune before trying to get
digital modes working...
As I say, no measured TX output
Thanks for the idea, but I've just made sure, and no, that box isn't
checked. The one for the RFE board is, and I do have an RFE board...
Regards - Dave (G0DJA)
EB4APL wrote:
> David, are yoy sure you have not the "Receive Only" option checked
> (Setup/General/Hardware Config/Receive Only)?
>
23 matches
Mail list logo