[Flexradio] 5000

I remember this being discussed but don't remember the solution. After talking on SSB, the receiver went dead. Back ground noise, line drops to bottom of the pan and equal spikes across. Checked different bands including BC and no signals. Rebooted several times but no recovery. What is the

[Flexradio] FW: Testing of Flex 5000

e this message in their emails. Try SPAMfighter <http://www.spamfighter.com/len> for free now! -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071205/6c94a1e6/att

Re: [Flexradio] FlexRadio Digest, Vol 32, Issue 5 Quick Start Guide for 5000C and D

t-products-2007?NCID=aoltop000301) -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071205/95612868/attachment.html ___ FlexRadio mailing list

Re: [Flexradio] ALC?

Yes, there is ALC logic. Do you have the leveler turned on? If so turn it off and see if that makes a difference. -Tim -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Blaschke Sent: Wednesday, December 05, 2007 2:23 PM To: flexradio@flex-radio.b

[Flexradio] ALC?

Is there ALC on the SDR-5000. If I put the radio in SSB mode and select VOX, the first spike when the radio switches to xmit severely overdrives my Alpha 87A amp, causing it to fault and switch to standby. This happens even if I set drive at one watt. I have filed a bug report, but perhaps I am

Re: [Flexradio] FlexRadio Digest, Vol 32, Issue 5 Quick Start Guide for 5000C and D

-- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071205/95612868/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flex

Re: [Flexradio] CTCSS tones with PowerSDR?

lows only one > > input. > > > > There are few 6 meter repeaters locally. Also 10 meter FM used to be > > pretty hot during sunspot peaks. I thought it would be neat to try > > repeaters with the 5000A. > > > > I realize a lot of fires are being put out righ

Re: [Flexradio] CTCSS tones with PowerSDR?

Not yet. We did get a report from Paul Shaffer of what it took to compile in VS2005 though. Eric Wachsmann FlexRadio Systems > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of k5nwa > Sent: Wednesday, December 05, 2007 11:25 AM > To: Flex

Re: [Flexradio] CTCSS tones with PowerSDR?

; 73, > > Steve N6VL > > -- next part -- An HTML attachment was > scrubbed... > URL: http://mail.flex-radio.biz/pipermail/flexradio_flex- > radio.biz/attachments/20071205/fc7094d3/attachment.html > ___ > Fl

Re: [Flexradio] CTCSS tones with PowerSDR?

At 11:11 AM 12/5/2007, you wrote: >Steve, > >We would be more than happy to create a branch on SVN for you to play with. >In order to get your work into the main branch though, I'd suggest working >with our DSP code gurus Bob McGwier, N4HY and Frank Brickle, AB2KT. They >can probably help clarify

Re: [Flexradio] SDR5000 PA Bias Adjustment

Just curious, but when was the last time you adjusted or even checked the PA amp bias in any other radio? I've got quite a few solid state PA's here, and unless it was something I built myself, checking the PA bias has never been an issue. What am I missing here? 73, Army - AE5P -Original Me

Re: [Flexradio] CTCSS tones with PowerSDR?

> An HTML attachment was scrubbed... > URL: http://mail.flex-radio.biz/pipermail/flexradio_flex- > radio.biz/attachments/20071205/fc7094d3/attachment.html > ___ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-r

[Flexradio] CTCSS tones with PowerSDR?

have a partial solution for CTCSS. I need to know how to tie it into PowerSDR. 73, Steve N6VL -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071205/fc7094d3/attachment.html

[Flexradio] SDR5000 PA Bias Adjustment

/attachments/20071205/497562f5/attachment.html ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base

[Flexradio] Firmware update - Important

Dear FLEX-5000 customers, This is to update everyone regarding FLEX-5000 firmware. As reported Thanksgiving week, there are intermittent TR switching issues in firmware releases AFTER 1.1.0 on some but NOT all CPU/firmware combinations. We have resolved all but one known TR error condition in 1.

Re: [Flexradio] serial# and age

You can tell the fiscal week it was assembled by the first four digits of the serial number. The first two are the fiscal week and the second two are the year. However, it will not tell you when the radio shipped. Gerald Gerald Youngblood, K5SDR President FlexRadio Systems Ph: 512-535-4713 Fax:

Re: [Flexradio] Ameritron AL-1200 WARNING!!!

John, Let me state categorically that there are NO know problems with the FLEX-5000 running 100W either barefoot or with an amplifier. We have multiple hundred FLEX-5000s in the field now and with no indication of such a problem with running 100W. We have many customers running full legal limit

Re: [Flexradio] retrieve from EEPROM

Gentlemen: This is apparently a firmware/software issue for certain type computers. We have identified the culprit and we're working on a solution which should be implemented in new firmware and software, which we expect to release very soon. John P. Basilotto W5GI Chief Operating Officer Market

[Flexradio] 5000A "Dead" Receiver

minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping -- next part -- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20071205