Hi,
I am wondering if any of you have attempted to use the Flex 5000 to receive
longwave stations below 500KHZ. I have listened down in that range and the only
thing I hear is BCI from the stations in the US broadcast band. I assume a
filter is needed to reject the BC band interference.
73,
Hello all.
I've updated WMP to the latest version trying to play post-processed audio
from a file that PowerSDR saved. PowerSDR loads and plays the file fine,
but not WMP. The reason I wanted to do this was to fast forward into a long
one hour recording I made while away from the house. PowerSD
I use Audacity
< http://audacity.sourceforge.net/ >
Which allows me to record, play, edit, convert
to MP3, adjust level, etc.. I use it with
TeamSpeak recordings to eliminate dead air,
uhhs, off-topic conversations, amplify the
guys with low levels, change the tempo
without changing the pitch,
Hi Harry
As I understand you will need one or more extra lowpass filters
(or bandpass if you like).
The spectum display below a 500 kHx is indeed "interresting"
with all the mirror images ;-)
A nice hobby project is the switching / tuning of the extra filters
Happy experimenting
73s peter pa0pvn
On 1/24/09 1:54 PM, "NU8Z" wrote:
> I double ditto, that last ditto
>
> I also make the occasional mistake. I go to type in his call and end up on
> another band or up 1mhz.
> That all depends on his call ..hi
> I hate when I do that!
>
> Mark
> NU8Z
With the current software, that's pretty t
Hi Tim, just in case...make sure that you have sampling rate under wave
options set to 44100 in PowerSDR.
73 Ross K9COX
Hello all.
I've updated WMP to the latest version trying to play post-processed audio
from a file that PowerSDR saved. PowerSDR loads and plays the file fine,
but not W
I have resorted to disabling the keyboard shortcuts in PowerSDR when I
run contests ( Setup>Options Keyboard )
This mostly works for me as a seldom use any of the shortcuts except the
direct frequency entry. During the contest I have to use the band
buttons to change bands/frequency.
Al, K0V
Harry, et al.
Ah ha! I knew I couldn't be the only person interested in that 600 meter
stuff who also has a 5000A! I wonder how long you've been trying to
receive in this area? Five months before receiving my Flex5000A I had
noticed the topic of low frequency operation sponsored by the Leagu
The best receiver I've used on the low end has been the SDR-IQ. Works well
for bats as well (with the right transducer).
73 Ross K9COX
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flex
Al:
Excellent suggestion!
I disabled all the single letter shortcuts. The only ones I would really
miss would be Rit up (O) and Rit dn (I)
Band and mode can be controlled from the logging program.
I will see how this works during the next contest.
Thanks again for the tip!
Thanks
Mark NU8Z
--
I use that 'HotWheels' applet which makes the mouse wheel always control
PWSDR frequency when operating Writelog in a contest no matter what has
'focus'
but
you must enable the scroll lock button and it disable the numlock normal
keypad.
consequently
I frequently forget and use the numpad to
Guys
All I can say is be careful. I went to this website and downloaded audacity.
I did not run or install it but while on the website there were many pop-ups in
spite of my Win XP pop up blocker being turned on. I'm pretty careful and never
click the "x" to exit a suspicious pop up but rathe
12 matches
Mail list logo