Ross Stenberg wrote:
Reading between the lines it appears that the 3000 is every bit (no
pun intended) the radio that the 5000 is. I'm sure that this was a
delicate line to follow during the development of the 3000. The
differences appear to subtle.
B
The differences are not so subtle. Th
I would like to modify the info in each of the band stack registers.
However when I open PowerSDR in Access and look at the Bandstack Table the info
in there is not the same as what one sees when clicking on the Band stack
registers when PSDR is running.
So how do I change the info in t
I can at least confirm that vcom does not work on my instance of x86 win7
7100 build - com0com works but locks up PowerSDR after a few seconds of
operation and that is with the emulate baud/buffer overrun, was wondering if
anyone is having any luck with com0com under win7?
On Sat, May 2, 2009 at 6
Since vcom doesn't work well with Vista x86 I would not expect it to
work with Win7 x86 either. It will not work with either 64-bit OS.
-Tim
Sent from my iPhone
On May 2, 2009, at 7:52 PM, "Larry da Ponte"
wrote:
> Paul, how are com0com or vcom working on win7?
>
>
> -Larry
>
>
>
Paul, how are com0com or vcom working on win7?
-Larry
On May 2, 2009, at 13:37, Paul20 wrote:
I have just loaded the 64bit version of windows 7 build 7100 and
powersdr is running happily at the minute.
Again replaced the IEEE1394 driver with the legacy one..
So It seems to be no probl
Tim I have used the SDR-5000 only for receive until today. I also wanted
to use it for transmit. I show no rf coming out of the RVXR port. It may
be because when I set the transverter up in XVTR for Split RF. The
Panadapter drops from -130 to -140. It should do nothing. Need to get
this work
I have just loaded the 64bit version of windows 7 build 7100 and powersdr is
running happily at the minute.
Again replaced the IEEE1394 driver with the legacy one..
So It seems to be no problem with both versions ie 32 and 64bit when you use
the legacy driver.
So Its looking promising for Wi
What is the version of PowerSDR both of you are using?
Also, the first rule of PowerSDR 1.x troubleshooting is to create a new
database and use the latest release of PowerSDR (nothing from the SVN except
maybe the TRUNK) if something quirky is happening.
-Tim
-Original Message-
Fro
I am attempting to help KB8RQ get his LT2S transverter working with
Flex-5000. Here is the issue: When he enables Split RX on the XVTR
setup screen, his panadaptor baseline disappears on PowerSDR and it
stops receiving, even though PowerSDR does not show that it has
switched to TX mode or MOX.
Paul,
Thank you for posting your efforts in interoperating PowerSDR with Windows 7
Beta thus far. I have been playing with the OS for quite a while now, and
have been impressed with its responsiveness and functionality thus far;
mileage may vary dependent upon hardware. I have not tried working
Steve
My typical operating mode for HRD/DM780-
For PSK and other digital modes I use the DIGU mode with a 2.7k filter
and click on the DM780 waterfall to tune . This works well 90+ % of the
time. Using this method I have been able to successfully copy adjacent
as well as weaker signals. I als
Hi,
same here on W7 32Bit build 7100.
Using "legacy" driver, instead of normal driver, PwSDR 1.18 and W7 works fine.
Using normal driver, firewire seems not recognize F5K properly.
73 Beppe
IK3VIG
www.cqdx.it
At 14.32 02/05/2009, you wrote:
Tim
This was the 32 bit version.
cheers
paul
GI
Tim
This was the 32 bit version.
cheers
paul
GI4FZD
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.bi
Is this with the 32 or 64-bit version of Win7?
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Paul20
Sent: Saturday, May 02, 2009 4:29 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] how to install legacy IEE1
apparently Operator Error.
Don't know how...but Break In became disabled.
Duh...
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexra
go into control panel then click on the little arrow beside the words control
panel at top of screen
select "All control panel items"
click on the system icon
then choose device manager..top left
dvice manager opens..click on little arrow beside IEEE 1394 bus host controller
and you will see you
Reading between the lines it appears that the 3000 is every bit (no pun
intended) the radio that the 5000 is. I'm sure that this was a delicate line
to follow during the development of the 3000. The differences appear to
subtle.
Bret,
Thanks for the insight into your new radio,and from a
I at last managed to get Powersdr running on Windows 7.
I was having problems in the fact that the Flex Firewire driver appeared to be
working ok but it wasn't communicating correctly with powersdr.
When I ran Powersdr up it took about 5 mins to read eprom and then stopped
communicating with the
18 matches
Mail list logo
