I have found that the F3K really doesn't need a preamp like the F5K does for
weak signal work, but if you must use one, I would recommend a mast-mounted
preamp with variable gain so that you don't overload the F3K front end. I am
partial to SSB preamps. A bit pricey, but well made and hold up
I don't have any tips on the VOX sensitivity. Sorry. Maybe once the current
round of DSP improvements are made, then the VOX and the noise gate will get
some attention to tweak them up a bit.
-Tim
-Original Message-
From: Jim Barber [mailto:audio...@charter.net]
Sent: Sunday, June
I merged the SpaceNavigator support to the Test branch. It is working in the
current SVN 3184.
73 Ed W2RF
-Original Message-
From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-
radio.biz] On Behalf Of Alan NV8A
Sent: Sunday, June 21, 2009 7:58 PM
To: FlexRadio
The fact that you get RF in the shack and on 75 and 40 into any rig is a dead
giveaway that RF is coming in on the antenna I tihnk in the end it will prove
to be that alpha delta antenna that is the culprit
73
___
FlexRadio Systems
For VE7XS and others.as a remote control Flex 5K user, here is some
good news.
I have new beta software I am testing now installed in my Wavenode WN-2
that allows NEW momentary control of a relay that WILL be installed in my Flex
5K to turn on and off the Flex. This has been an
Interesting question for you.
If your in 7O (Yemen and the only country I don't have a legal card from),
and you remote to your rig at your home station.
If I work you, do I get credit for Yemen or USA 9 Land? LOL LOL
Please go there so we can find out!
On 6/22/2009 7:58:12 AM,
While I am an incredibly happy WN-2 owner, you can also order the
array solutions power meter when you order your new Flex radio. I am
not so familiar with the Array Solutions meter but I believe it has
some of the programming capabilities of the WN-2, check it out!
Neal Campbell
Abroham Neal
Hi Clay;
Thanks for your observations , have you actually put a signal
generator on it ?
Just wondering what the microvolt sensitivity level is , then compared
to having the preamp on ?
73
Dan
K8ICB in Florida
On Jun 21, 2009, at 2:17 AM, Clay W7CE wrote:
Without a preamp, you haven't
Jack,
This is very much what we are thinking. The new reflector will be for all
unreleased software or firmware testing. The existing reflector will be for
the then current Official Release only.
Gerald
Gerald Youngblood, K5SDR
President
FlexRadio Systems
13091 Pond Springs Rd. #250
Austin,
Marty,
I agree that the released versions of DDUtil, VAC, etc. are not experimental
when running on SUPPORTED operating systems. However, if one is trying to
run them on currently unsupported operating systems, they would then be
properly characterized as experimental.
Gerald
Gerald
FS: Flex radio SDR-1000 Package
I have a Flex Radio SDR-1000 1 W version with DEM 144 MHz transverter,
EDIROL FA-66 sound module, firewire computer card, firewire cable, manual,
SDR software and all required drivers. All in excellent condition.
$750.00 paypal preferred.
Would also
From: Jim Barber [mailto:audio...@charter.net]
Thread hijack:
Tim: VOX is a bit painful (on the 5K at least) with lower-output mics (like
the PR-781) connected to the rear panel balanced input. Any particular tips?
I ran into this at the very beginning with my F5K. For my testing I
used a
Hi Ed,
What about your RX2 (output to VAC) branch?
73 Robert
2009/6/22 Edward Russell e...@qrv.com
I merged the SpaceNavigator support to the Test branch. It is working in
the
current SVN 3184.
73 Ed W2RF
-Original Message-
From: flexradio-boun...@flex-radio.biz
That part hasn't been merged with test. It's not a big deal though. I'll run
it by Eric.
73 Ed
-Original Message-
From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-
radio.biz] On Behalf Of Robert Bajuk
Sent: Monday, June 22, 2009 12:53 PM
To:
Is there a separate reflector for the 5000C ?
tnx
Al
W4ABW
Raleigh
**An Excellent Credit Score is 750. See Yours in Just 2 Easy
Steps!
(http://pr.atwola.com/promoclk/100126575x1221823273x1201398689/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072hmpgID=62bcd=Jun
Not at this time; it's all the FlexRadio models,
When the experimental group splits off to a
different reflector, the volume of posts for
the bleeding edge stuff here will decrease.
Mike - AA8K
w4...@aol.com wrote:
Is there a separate reflector for the 5000C ?
tnx
Al
W4ABW
Raleigh
No, there is not.
At this time there is only one FlexRadio Systems Reflector. In the future,
software development and experimental code testers will have their own
reflector to keep that traffic off of the mail reflector that is intended to be
used primarily for discussing all aspects of FLEX
It is recommended that everyone should review the PowerSDR release notes before
installing a release. If there are dependencies or caveats, they are noted
there. For PowerSDR 1.18.1, the Release Notes are found here in the Knowledge
Center.
I've loaded PSDR 1.18.1 and it seems to work fine - Flex-3000, 3GHz
single-core PC, sampling 96KHz 512 buffers. NR in particular seems to
be much more effective even though I thought 1.18.0 was good.
One change I've noticed between 1.18.1 and 1.18.0 is that the AGC-T
behavior seems to lag when
Can't wait until this shows up in an official release!
At 06:53 PM 6/22/2009 +0200, Robert Bajuk wrote:
Hi Ed,
What about your RX2 (output to VAC) branch?
73 Robert
73, Robert KR7O/YB2ARO, DM07ba/OI52ee (ex. N7STU)
k...@vhfdx.com
www.vhfdx.com (KR7O/YB2ARO homepages)
Hello,
I think exactly the same as Joe, I use my SDR1000 with Ozy/Janus as sound
card and control, and I am a bit frustrated as I cannot play with PowerSdr
1.18.1!
What can I do?
73,
Roland, f8chk.
-Message d'origine-
De : flexradio-boun...@flex-radio.biz
Hello,
I also agree with Joe and Ronald. I to use the Janus/Ozy sound card. 1.18.0
works fine but 1.18.1 give and error about no audio devise. In the set up
there is a selection for the Janus/Ozy set up.
Bob
AC8O
-- Forwarded Message --
From: roland etienne
As it turned out the N8VM program had disapeared from my computer REINSTALLED,
it now works although one of my contacts the ham was 100% macros, wondered why
I bothered to get it on PSK.
The other contact was real
Burt
--- On Fri, 6/19/09, Al Groff a.gr...@mchsi.com wrote:
From: Al Groff
What is your AGC setting , SLOW or LONG?
Try medium.
Bob
N4HY
Jack Haverty wrote:
I've loaded PSDR 1.18.1 and it seems to work fine - Flex-3000, 3GHz
single-core PC, sampling 96KHz 512 buffers. NR in particular seems to
be much more effective even though I thought 1.18.0 was good.
One
Agree fully ... It would be really nice to have RX2 to VAC option in an
official release
73 Robert
2009/6/22 k...@vhfdx.com
Can't wait until this shows up in an official release!
At 06:53 PM 6/22/2009 +0200, Robert Bajuk wrote:
Hi Ed,
What about your RX2 (output to VAC) branch?
73
I am using a stereo cable from the back of the 5k to my computer
sound card and can process rx1 audio in the right channel and rx2
audio in the left.
Jerry W4UK
At 21:11 6/22/2009, Robert Bajuk wrote:
Agree fully ... It would be really nice to have RX2 to VAC option in an
official release
Bob,
I think you're on to something.
With AGC at slow, medium, or long, there is a noticeable lag. It may be
different length of time within those three, my ears aren't calibrated
enough to say for sure.
With AGC at fast or fixed, there is no perceptible (to me) lag.
In all cases, any lag
It's not a problem. It is just the AGC itself. AGC changes in AGC-T are
just following the AGC rate.
Carl Moreschi N4PY
121 Little Bell Drive
Bell Mountain
Hays, NC 28635
- Original Message -
From: Jack Haverty j...@3kitty.org
To: Bob McGwier rwmcgw...@gmail.com
Cc:
If I tune my F3K running PSDR 1.18.0 antenna to 20m (1.1 SWR) and in
SSB, PTT in silence, there are pulses on the external power
meter. If I record it and play it back, there is a kind of crackling
sound at the beginning of the transmission for 1-2. Happens with
MOX, so its not the PTT
Hi Guys,
I just had to chime in about the idea of splitting up the reflector. I really
look forward to my daily digest from Flex that ranges from the beginner to the
developers of the SVN software. We have excellent support from staff at
Flex-radio.
Do we really want to split their time
That's good. However we're talking about direct I/Q output of RX2, not
audio.
-Original Message-
From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-
radio.biz] On Behalf Of Jerry Flanders
Sent: Monday, June 22, 2009 5:37 PM
To: Robert Bajuk;
I fail to see why not... I think a LOT the traffic on this reflector
scares away many people from buying a flex product..
really.. seriously .. it takes 10 seconds to sign up to a 2nd list.. and
like its really hard to click on a 2nd digest message to see the Pre
Realease software issues. ..
The flex 3000 does not have a RX only port available so you will have
to get a preamp with relays to switch tx rf around the preamp so you
don't blow the preamp up..
w9Ray
Larry da Ponte wrote:
I'm looking for a recommendation on a 6 meter preamp for the Flex 3K for
meteor scatter work -
But at this time, we are _only_ talking about using direct I/Q output
of RX2 with VAC, right?
Until RX2 gets full VAC access, those wanting to use it for more than
just listening will probably use a stereo cable.
Jerry W4UK
At 23:22 6/22/2009, Edward Russell wrote:
That's good. However
I need help understanding the Protective PTT Circuit Between TX1-3 and
Amplifier (Flex-5000 Owner's Manual v1.14 pdf page 10 (page 22 of 227 as
seen by Adobe Reader) . Figure 3). I've today formed an idea of how it
works. Initially, the schematic meant very little to me, now I may be right
or
I have an idea for what I consider would be an improvement in operating the
Flex.
I can't say that I am all that fussy about opening the Antenna form
whenever I want to change antennas. I really liked the way my FTDX-9000
handled the antenna selection . it has a simple set of 5 buttons (Ant1,
This reflector shows the work that goes into the Flex product development and
convinced me to purchase my SDR-1000. Also a new 3000 was purchased and
should be here in a day or two, again thanks to this same reflector.
The software development has been part of that.
Of course it's not a big
It's never happened before this morning. I was working 6 meters (managed to
work an EA8 and a D44). All of a sudden, the cross changed to an arrow and I
could not change frequency by moving the mouse. I also could not activate
the yellow lines with the right mouse button to allow snap tuning.
Was it the PC that locked up, or the program? An easy way to tell is to hit the
Caps Lock key. If the Caps Lock light on the keyboard comes on, you still have
keyboard control, and the PC is running OK.
Did you try control-alt-delete to bring up the Task Manager so you could kill
PSDR?
Jim
At 00:32 6/23/2009, you wrote:
Jerry,
1. Are you plugged into the 5k's stereo Powered Speaker/Line Out jack?
and
Yes - it has the RX1 audio on one side and RX2 on the other. I forget
which is which.
2. How do you get RX1's audio on one channel and RX2's audio on
the other channel?
Hi!
Me too!
I like Janus/Ozy with SDR-1000. Should we just skip over versions
1.18.1 and upwards until version 1.20 release arrives?
Ahti OH2RZ
2009/6/22 keega...@juno.com keega...@juno.com:
Hello,
I also agree with Joe and Ronald. I to use the Janus/Ozy sound card.
1.18.0 works fine
After receiving several private emails please consider my comments withdrawn.
I didn't realize this was such a strongly felt issue about splitting the
reflector and certainly didn't mean any offense by my post.
N7BUI
___
FlexRadio Systems
42 matches
Mail list logo