For sale at Ham Radio Friedrichshafen :
My SDR+1000 with Delta 44 sound card : Asking 300 Eur
Can be found at ON4BCB 's fleemarket table in hall 3
Best 73's Eddy ON7UN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-rad
So we are going to start an FBE (Flex Bleeding Edge) reflector to save
this reflector from technical talk about bleeding edge buggy development
code. I am beginning to wonder who is actually getting saved ...
(looking better EVERY day).
;-)
Bob N4HY
Tom Thompson wrote:
Hey Brian,
How
Hi All,
I'm having some system lockups where the only option is pressing the
reset button on the PC and missing CW characters when trying to use
DM780 to send CW with my USB Winkeyer2 or with KY command. At first I
thought it might be an RFI issue with my Firewire cable because when
it starts acti
Hey Brian,
How about an Inverter from Radio Shack and run the Mac power supply from
120 VAC converted from 12 VDC.
Tom W0IVJ
Brian Lloyd wrote:
OK. You guys know I am am an Apple Fanboi. I will be using my MacBook
Pro to run the Flex for Field Day. But I need a way to power it from
12V as
OK. You guys know I am am an Apple Fanboi. I will be using my MacBook
Pro to run the Flex for Field Day. But I need a way to power it from
12V as there will be no mains power at our site. No problem, just get
a DC power adaptor, right?
But wait, you *can't* get a DC power adaptor for the new MacBo
Well it seems I shot myself in the foot. I reconfigured the com0com
ports, having turned on the buffer over run and baud rate emulation on
both sides. When I put them back to baud rate emulation on the
sending port and buffer underrun on the receiving port, all went back
to working.
Now
Mark- I believe this is a bug in 1.18 -- update to 1.18.1
Mark Lunday wrote:
SETUP: SDR 1.18, MixW 2.18, F3K, Vista SP2.
OBJECTIVE: Get MixW 2.18 working on digital modes.
ACCOMPLISHED: Sending CW from MixW 2.18, successfully reading frequency from
SDR 1.18 into MixW 2.18
FAILURE
Rich
Sounds like your audio is not connected (I assume you use VAC)-- check
VAC settings Input, output, enabled, etc. , Rx Gain also
rich kennedy wrote:
Fellow Flexers,
Yesterday I upgraded to PSDR 18.1. This upgrade included the new firewire driver, firmware, and .Net 3.5SP1. The upgr
SETUP: SDR 1.18, MixW 2.18, F3K, Vista SP2.
OBJECTIVE: Get MixW 2.18 working on digital modes.
ACCOMPLISHED: Sending CW from MixW 2.18, successfully reading frequency from
SDR 1.18 into MixW 2.18
FAILURE: Unable to activate TX from MixW 2.18 in BPSK31 mode.
STEPS FOLLOWED: Follow
Using 1.18.1 for digital.
RCP 2
com0com
buffer overrun is set on both ports
writelog is using comm 10/11 pair, ddUtil using com 5/6 pair to talk
to PowerSDR.
I moved over to the Vista Ultimate machine with about the same
results, except that in the standalone writelog/powersdr mode I can
Anyone else having problems with ddUtil, Windows Media Center Edition,
SP3, with the .net framework up to date?
When I first began trying to integrate HotWheel, 1.18.1, ddUtil, and
WriteLog for Field Day, all worked nicely except CW keying out of
writelog. Since mine will be the phone stat
I managed gather all the parts and put together 2 more preamps for 6 meters on
the Flex 5000a. As before $75 each + shipping ($7USA). As before, these are
using the NEC HJ GaAsFET NE325S01 and currently run .30-.40 dbnf @20+ dbg.
Thanks,
Pete WA2ODO
__
Fellow Flexers,
Yesterday I upgraded to PSDR 18.1. This upgrade included the new firewire
driver, firmware, and .Net 3.5SP1. The upgrade went smoothly. The Flex5000
came up right away without problem. I then entered in all the user-specific
parameters like Memories, Antenna Selections, CAT,
On Thu, Jun 25, 2009 at 6:46 AM, Tim Ellison wrote:
> It is already in progress
If you like I can flesh it out a bit more. I wrote that just as I was
planning to go to bed last night and I was starting to get brain-dead.
(I know that was an opening but no comments from the peanut gallery,
plea
Mark,
Sounds like you need to use DDUTIL for the splitting of the virtual com
ports.
http://k5fr.com/ddutilwiki/index.php?title=Main_Page
Good instructions there on how to use it.
73,
Dudley
WA5QPZ
Mark Lunday wrote:
First, thanks to W9OY for saving me a lot of embarrassment by addres
At 16:32 6/25/2009, Mark Lunday wrote:
...
. Can I connect more than one virtual COM port through SDR 1.18? If
yes, then how? I only see an option to select a single COM port under 1.18
SETUP menu. I want to use several apps to simultaneously read/control the
frequency (OmniRig/CW Ski
First, thanks to W9OY for saving me a lot of embarrassment by addressing
several questions 1 on 1. Lee, I owe you several beers!!
Second, I am at the point where I need some help.
. Can I connect more than one virtual COM port through SDR 1.18? If
yes, then how? I only see an opt
In the KB article, don't forget to mention that conventional audio
cables work for the connection between the radio and the sound card
just as well with the flex as they do for legacy radios. Also, for
those having plenty of serial ports, a null modem cable will work
perfectly well instead of c
It is already in progress
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Peter G. Viscarola
Sent: Thursday, June 25, 2009 9:01 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] PowerSDR and Digital Modes Overv
I certainly second the recommendation for posting this in the KB Articles.
I was just typing out a similar reply when I read this reply.Thank you
Brian for taking the time to write the overview. It provides the good big
picture for new users.
Brian, I hope a picture of your students at the
>
> First, PowerSDR is the radio itself. Your Flex 5000 or Flex 3000 plus
> your computer running PowerSDR *IS* the radio.
>
That was a darn good introductory overview that Brian posted...
Perhaps it can be archived as a KB article for those with similar
questions in future?
Peter
K1PGV
_
21 matches
Mail list logo
