I have an SDR-1000 and have dealt with this issue since day one. All of the
suggestions given here should work fine. Unlike other radios that come EQ'd for
communications type audio, the Flex does not. The EQ in the Flex is absolutely
necessary and adds the flexibility to tailor it to your part
On Sat, Jan 23, 2010 at 12:55 AM, Nige wrote:
> A dummy load, a second radio and a pair of headphones go along way when
> aligning the audio, it does pay big dividends.
Just remember, if the other radio is a standard receiver, you are
hearing the audio as modified by the IF response of the monit
Dan,
If you know the EMU 1212 card will not share an IRQ with your firewire, then
that is a step in the right direction. Increased DPC's are also seen due to
improperly or inefficiently written drivers as well. The best way to tell
if you will see any increase in DPC's, given that your EMU card
Tim's suggestion to use the EQ is good. I boost the 2K setting. You can also
cut the lows by adjusting your transmit bandwidth setting. Try 150 Hz to 2900
Hz bandwidth and boost the 2K setting in the EQ as needed for good general
purpose audio. Add +3 on the Compander for a little punch. Don't
hello Mike
good to know
i am using now the Edirol speaker they are as well very very good
but they cost more then the Behringer the one i have is the 15 w so 40w will
be fantastic good rich sound .many thanks for this info .
good weekend now
elan g0uut
E.P
--- On Sat, 23/1/10, Mike Sche
To all,
The Knowledge Base is currently off line while it is undergoing some
needed maintenance. I will send out a notification when it is back on-line.
Sorry for any inconvenience this may have caused.
-Tim
--
W4TME
FlexRadio Systems - Info Management Admin.
"Tune in Excitement"
__
If i put my emu 1212 m sound card back in, to play with my softrocktransceiver,
and it doesnt share IRQ's with my firewire card, will myDPC's go to the devil ??
i could try it, but there are other fish to fry. just curious if it willbe a
waste of time, based on somebody else's experience..
73, w5
is any one use this speaker ?40w power
any info thank you
E.P
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-ra
Interesting comments about the Flex's low end. I started using the ProSet Plus
(HC4/HC5) in 2008 on the F5K. The Flex was the first radio I've ever had which
has resulted in unsolicited "fabulous audio" comments. I've never received so
many compliments about audio in my 25 years. I have never ru
9 matches
Mail list logo
