Just to let everyone know its not a problem with 2.4.4, I have probably
migrated 5 customers that have skimmer working.
73
On Sep 18, 2012, at 2:08 PM, Bernie Huth wrote:
> I have DXLabs Commander configured as RCP1 in DDUtil and CW Skimmer
> configured as a Secondary CAT Serial Port in Comman
I have DXLabs Commander configured as RCP1 in DDUtil and CW Skimmer
configured as a Secondary CAT Serial Port in Commander with the Follow &
Lead Primary radio button selected.
-73-
Bernie
W4BGH
--
on 9/18/12 9:41 AM, Jim Jannuzzo at jsqu...@msn.com wrote:
> Interesting discrepancy betwe
Had the issue here too. Tim told me to reset database, and it cured it.
73s
Erik OZ4KK
Seems as if “Out of Band” is displayed regardless of frequency entered on both
VFO A and VFO B. Is there a band data file that is not being read? Other than
the display, everything seems to behave as norm
Seems as if “Out of Band” is displayed regardless of frequency entered on both
VFO A and VFO B. Is there a band data file that is not being read? Other than
the display, everything seems to behave as normal.
Any assistance greatly appreciated.
TNX es 73
David, WA3DNM
You can help find th
Because of the same reason it is not currently allowed on the input, but
without the possible damage to the radio; it by passes the DSP.
Tim Ellison
On 9/18/2012 10:59 AM, Jordan Arndt VE6ZT wrote:
So then why not simply define the Flexradio Audio as an output-only
device...?
I've been using th
So then why not simply define the Flexradio Audio as an output-only
device...?
I've been using the Flexradio audio to feed Map65 directly without the need
for VAC.
It works flawlessly...
73...Jordan VE6ZT
- Original Message -
From: "Tim Ellison"
To:
Sent: Tuesday, September 18, 2
Nor can I.
If the VAC cables are set as per the recommendations in the PowerSDR
v2.3.5 Release Notes and you use the following KB article as a guide
(http://kc.flexradio.com/KnowledgebaseArticle50357.aspx) it works just fine.
One thing to remember about Direct IQ, the sampling rate of the VAC
Jerry,If you use DDutil, you can set a Band Change Macro to execute a CAT
command whenever you change to a different band (like ZZDQ-125;ZZDN-115;) to
set the display's lower limits. After awhile, you'll find that you add other
comands to several Band Change Macros like DDFW;ZZDQ-135;ZZDN-135;Z
Interesting discrepancy between your results and mine. I have CW Skimmer
decoding wideband CW on my RX2, while simultaneously decoding other digi modes
on my RX1 using DM780. Several posters have reported problems hooking up CWS
with 2.4, and I don't understand where the problem lies.
I use
9 matches
Mail list logo
