How about a link...
-Original Message-
From: flexedge-boun...@flex-radio.biz
[mailto:flexedge-boun...@flex-radio.biz] On Behalf Of
joetor...@cablelynx.com
Sent: Thursday, October 11, 2012 10:45 AM
To: flexradio@flex-radio.biz; flexe...@flex-radio.biz
Subject: [FlexEdge] [Fwd: ] Flex
Hi I'm having some trouble getting my Flex-3000 Radiosport RS60-CF
Headset to work together. The headset works ok but the mic connector too the
reario does not. I set it back to Radiosport and the said the headset and
cables are ok. But their might be a problem with mic connector von the
I took delivery of a new 5000a with ATU 3 days ago and I'm having a case of
panic and potential buyers remorse. Please expound some wisdom or talk me
off the cliff.
1. Front mic port is DOA right out of the box. I've switched to a xlr
mic plugged into the balanced port on the rear and I'm
Aaren:
1. Front mic port is DOA right out of the box.
Check to make sure that the notch on the mic connector is lined up
correctly with the port when you plug it in. I've noticed that some
connectors go in without the notch being aligned.
Tony
On 10/11/2012 10:54 PM, Aaren Jensen wrote:
Aaren
Sounds strange as their quality control is pretty great. I am also
confident that Flex will get on the phone with you and sort it out.
Just to make sure that RF isn't an issue, do you have a dummy load that you
can test 20M on? Usually if a computer up and freezes, it is due to RF
Aaren -
The it works on 80, dies on 20 very much sounds like RF getting into the
computer. Others can give you a list of things to check, but to start with
- you need a short solid ground connection between the 5000 and the PC. RF
in the shack may result from high swr, keeping RF off of the
Have you gone into the mixer control panel and set it to use the rear jack?
That threw me the first time I tried using the rear audio in.
73, Jim KQ6EA
On 10/12/2012 02:44 AM, ke6...@aol.com wrote:
Hi I'm having some trouble getting my Flex-3000 Radiosport RS60-CF
Headset to work together.
Aaren
With respect to your mic situation, did you check the proper box on the
input to make sure that you have the front panel mic turned on? You can
select either the front or rear mic input from the menu.
Terry
On 11/10/2012 23:09, Tony wrote:
Aaren:
1. Front mic port is DOA right out
A simple line isolator saved my flex-3k from the trash heap. I thought I
was going crazy and that I wasted my money. Turns out it was just a little
RF getting back where it doesnt belong. Going through this helped me
realize that some things in my shack needs to be reworked. I'm sure alot of
I have the same issue. Works on 80 and audio is distorted on 20 meters. I'll
bet it is RF ingress issues like mine. Now to determine where the RF is coming
into the radio.
73,
Robert
KB6QXM
Ham Radio Open Conversation
Yahoo group owner/moderator
- Reply message -
From: Ken Akin
10 matches
Mail list logo