Firstly, many thanks for those of you who responded to my pleas for help.
The general advice was to install PowerSDR 1.x, make sure the SDR-1000
runs with that, then install a version of 2.x. I installed 1.8 and
already had 2.3.5 on my PC (for my Flex1500). As soon as I ran 2.3.5,
the
I accidentially discovered this problem while working some Dx.
My noise level was at –140 when I decided to change bands. Upon changing bands,
I went to tune the antenna. Noticed the tuner was not powered on , when I
turned on the ac power to the tuner, the noise level on the 5000A went from
When out of Joy, try Dawn. ;)
Seriously, there has to be a new source of that noise in or near your
house/station. I have seen trickle chargers, battery tenders, wall warts,
etc. that caused horrendous noise. I personally found a wall wart on the
old router that went bad (it was 6 years old) and
Dan, I had similar problems. However it was HRD version 6 that was causing it.
I am looking to see if I kept the email how to correct this problem. If and
when I find it, I will posted and send you a copy.Or, if you are using HRD go
to their FAQ and you may find the solution. 73, Ernest
Dan, Since the message said do not edit, I am send HRD entire message. Ernest
- W4EG Support (supp...@hrdsoftwarellc.com) Add to contacts 3/01/13 To:
w...@hotmail.com From:Support (supp...@hrdsoftwarellc.com)You moved this
message to its current location.Sent:Fri 3/01/13 3:29 AMTo:
Hi All,
Here's the fix with PSDR and HRD6 changing to VFO B.
In HRD, go to DX Cluster window, then click on the options button. In
the Selection tab make sure Change Modes on DX Spot, Use QSX on
Frequency, Reset Split on ALE Reset, and Reset Split on ALE Save are all
unchecked.
73
Dave
6 matches
Mail list logo