John, you need to use DDUtil for this. Here's how it works. It is similar
to a router. DDUtil talks to Powersdr. Everybody else talks to DDUtil.
(My setup)
Com 9, 19 PSDR
Com 2, 12 CWS (CW Skimmer CAT
Com 3, 13 HRD
Com 4, 14 MMVARI
Com 5, 15 MMTTY
Com 6, 16 FlexMemory
Com 7, 17 Direct CW
I paid to register and have no regretted it for one moment!!!
Jim
W4YXU
On 10/24/2013 8:54 AM, John Kramer wrote:
Rob
It is working as per your guidelines - I can't thank you enough. All three
devices, PSDR, Tmate meter and HRD
are all working together perfectly !!
I can't tell you how
Hi Bob
Many thanks for all the information you have provided. It looks really neat
doing it with DDUtil, however
I managed to get all 3 devices talking to each other using VSPE with the help
of Rob.
I am just really happy to have everything working well right now, and am a bit
nervous to do an
Rob
It is working as per your guidelines - I can't thank you enough. All three
devices, PSDR, Tmate meter and HRD
are all working together perfectly !!
I can't tell you how happy I am, I have tried getting this working on my own
about 3 or 4 times in the past year,
and each time I was forc
It is a registry file. Right click on it and install itif you need to.
If you system is running fine, don't make any un-necessary changes.
Tim Ellison
On 10/23/2013 2:31 PM, Larry Bryan wrote:
Tim,
I'm curious about this registry editor. Are there any instructions on it's
use before I run it
Rob
Thank you very much for that detailed explanation…I think the penny has dropped
on my side now.
I have been using VSP MANAGER to create virtual port pairs. I was confused when
you spoke about
a "splitter" and a "connector" port, because there is no such feature in VSP
manager - only
pairs
Hi Rob
No it didn't work - I made a virtual pair COM10 and COM11. I went onto PSDR and
made PSDR COM10,
then I started HRD and told it to connect to COMM11. It connected and talks to
PSDR no problem.
Now when I start theTMate meter by Bobsmeter, I tell the meter to also connect
to COM11, but it
Many thanks Rob, I will try that pair - COM10 and COM11
Thank you very much for helping me with this
73
John, ZS5J
On 24 Oct 2013, at 12:07 PM, Rob Keijzer wrote:
> John,
>
> The 10 -11 setup is what I have. Use any combination that suits you.
>
> BUT: the important thing is that the seco
Hi Rob
I currently have COM4 (PSDR) paired with COM6 (HRD) in VSPE
So, must I delete that pair, and then make a new pair using COM10 and COM11,
and then assign COM10 to PSDR and then everything else to COM11 ?
If I try to connect Tmate meter to COM6 it tells me it is busy (because it is
being
9 matches
Mail list logo
