[Flexradio] PowerSDR 1.9.0 with scan

Hi folks, I built my own version of PowerSDR 1.9.0 SVN 854 with the scan function back in, if anyone wants to try it the link is below, the zip only contains the .exe. I also added a couple of checkboxes, one to make it loop and the other to stop if the signal level exceeds the squelch

Re: [Flexradio] Best Sound Card For Sensitivity Only

Thanks for all the suggestions, in this case I am not looking to use it with PowerSDR, it is for another project with a Winradio G305. I am looking to try and improve the VHF/UHF sensitivity, I currently own a Firebox, FA-66 and Delta 44 which I use with the SDR1000. In your expert opinion

[Flexradio] Firebox problems transmitting

Hi all, The SDR-1000 is working great in receive with 1.6.2 and latest SVN, now I am trying to get TX to work, my first problem is how to set the Firebox mixer, at first I seemed to be only getting a DSB transmission with almost no power, all leads look connected ok though. I have had a

Re: [Flexradio] SDR, Digital, Future

Is it easy (possible) for PowerSDR to be able to decode two signals on different frequencies within the sampled bandwidth at the same time? The RFSpace SDR-14 software has this function and it is fantastic, IMHO. Andy -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]

Re: [Flexradio] -11KHz junk

I too have noticed a spike at -11 kHz as well, it seems to jump up and down, appears larger while tuning with the mouse wheel, I would also like to know what causes it and how it can be minimized. Andy. G1JVY -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf

[Flexradio] Noise Floor Higher - SVN vs 1.6.2

Hi Folks, Just got my SDR-1000 and only tried RX so far, I notice the noise floor is around 20-30 dB up the scale using the latest PowerSDR SVN compared to 1.6.2, is this correct? I have checked all the settings and they look the same between the two versions. I am using a Firebox for the

Re: [Flexradio] Noise Floor Higher - SVN vs 1.6.2

to high. Andy. G1JVY -Original Message- From: Eric Wachsmann [mailto:[EMAIL PROTECTED] Sent: 12 September 2006 15:55 To: 'Andy Smith'; flexradio@flex-radio.biz Subject: RE: [Flexradio] Noise Floor Higher - SVN vs 1.6.2 Andy, Did you import your database or recalibrate the RX Level on the new

Re: [Flexradio] Noise Floor Higher - SVN vs 1.6.2

Hi Tim, I've got a Rohde Schwarz CMS54 radio communications tester so I will run through the alignment with that and report back. Andy G1JVY. -Original Message- From: Tim Ellison [mailto:[EMAIL PROTECTED] Sent: 12 September 2006 19:13 To: Andy Smith; Eric Wachsmann; flexradio@flex