Brian, I thought maybe I should post this to the list too:
I just went to the shack and checked. Here is the scoop!
DSP Tab, Keyer Tab
Primary--Radio
Secondary-- COM17
PTT--NONE
Key Line-- DTR
Break In-- Enabled
CAT Control Tab
Enable CAT
PTT Control--Nothing entered
This works for me with N
Is there a way to have two programs, such as CW Type and N1MM, key the
transmitter for CW?
I have a friend that wants to do just that, and I cannot find a way without
adding some hardware to the system.
A serial splitter would work, except that all I have found only allows
multiple outputs and no
This has been bothering me for some time, and with the new release, I think
now is the time to ask the question.
Scenario:
I have F1.5k and F3k, two(2) home computers and a laptop.
(Sometimes help a buddy with his f5k)
All are working well with v2.6.4
All computers are set up to run eith
John, you need to use DDUtil for this. Here's how it works. It is similar
to a router. DDUtil talks to Powersdr. Everybody else talks to DDUtil.
(My setup)
Com 9, 19 PSDR
Com 2, 12 CWS (CW Skimmer CAT
Com 3, 13 HRD
Com 4, 14 MMVARI
Com 5, 15 MMTTY
Com 6, 16 FlexMemory
Com 7, 17 Direct CW
You might want to consider this:
http://technet.microsoft.com/en-us/sysinternals/bb963902
A program called Autoruns is here. It will let you stop the loading of
programs at boot time. If you can't get rid of the offending program with
something like Revo Uninstaller, this may be your way out.
Marty, I have found that click tune works best for RTTY contesting. Scroll
tuning is just too slow and inaccurate.
Bob, K4DJG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.
I hope I am not about to ask a stupid question, but here
goes.
I have a F3K running with CWSkimmer without issues. No
problems whatever.
I recently acquired a F1.5K. I cannot get Skimmer to work
properly at all.
My question is: What is the difference, concerning Skimmer,
between the 3k and 1
I had exactly the same thing happen. Second try went perfectly and then
Database Utility also went perfectly.
Bob, K4DJG
-Original Message-
First attempt at installing this version "hung" while installing
Flex-1500 drivers, then eventually indicated "Program not responding."
Machine t
Edit:
I am using a flex 3000.
Kermit, I am currently using an HP Probook fairly current model, win 7 8g
memory with pc express slot. In that slot I
have a firewire card with the TI chipset. I can't tell you the brand as I
don't remember.
This combination works just as well as the home compute
Kermit, I am currently using an HP Probook fairly current model, win 7 8g
memory with pc express slot. In that slot I
have a firewire card with the TI chipset. I can't tell you the brand as I
don't remember.
This combination works just as well as the home computer, and the CW latency is
almos
Art, I do not yet use wsjt, but with N1MM I use cat ptt and DDUtil.
Bob, K4DJG
For Those Who Understand, No Explanation Is Necessary.
For Those Who Do Not Understand, No Explanation Is Possible.
___
FlexRadio Systems Mailing List
FlexRadio@flex-r
Tim, does that also apply to the 3K? My problem is different in regards to
firewire and power up. Apparently on occasion the firewire is not
recognized on boot, and PSDR does not see the 3K. Power cycling does not
help, and requires re-boot of the computer. The firewire card was changed
to on
Thanks Neal. I was unable to run this procedure on XP Home, as I couldn't
select "Run as Admin".
However by opening cmd from the start menu it ran as expected. (Only one
user and it is Admin).
After all the years using and messing with XP, etc, I had never run across
this utility.
Thanks again
Having trouble accessing the KC. Is it down?
(http://kc.flex-radio.com/KnowledgebaseArticle50179.aspx?Keywords=firewire+c
ards
I have a problem with f3k, long delays etc. I am thinking that the weak
link here is the el-cheapo firewire card, and was looking for
recommendations for a pci or p
Bill, that description is for a flex 1000. check this one out.
http://kc.flexradio.com/KnowledgebaseArticle50357.aspx
Bob, K4DJG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Bill Ackerman
Sent: Saturday, November 19, 2011 4:34 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] CW SKimmer - CAT Control Not Working?
I've downloaded the eval versi
16 matches
Mail list logo