It is a fair amount of work to dump .NET 1.1 and its
managed extensions to go for CLI based .NET 2.0. We may very well do
exactly that for 1.7.0 but we are not there yet...
Bob
That is good news! Not that your taking votes but I would vote if I could
for a switch when its possable.
--
If
Hello to All: After installing the firmware fix I have noticed some
bleed over on the filters. I can hear signals both up and down in
frequency. When I mute the radio I can still hear audio but very low in
level. Happy Easter to All.
Dave-W4DWG
-- next part --
An HTML
Is anyone successfully using a PCMCIA firewire card with a laptop.
I am trying to use an Adaptec AUA-1422 USB/Firewire card without success.
Dave N1IX
The output power on my flex radio is a bit low. I was getting aprox 65 watts
into a dummy load on 40 meters. The power supply that I am using is capable
of 30 amps and all of the connections to the flex radio are good. I
calibrated the PA using a dummy load. I am now getting 80 watts out. Is
Can you play back IQ waves recorded at 96k with power SDR if your sound card
still is an cheap one that does not have a setting this high.
Will Power SDR use the wide wave file and output at a lower rate to my poor
sound card? If it will anyone have a good wave I could download sampled at
96k?
What was the cpu?
The one benefit to a mini pc is that I could run one off of 12vdc.
--
David H Hickman
On our Belize DXpedition, AA4SW brought along his min-ATX form factor
PC. These did not originate with the Mac Mini, at least not as such.
You can get them in several sizes
Is the impulse generator used in the latest code? I don't see any updates on
the Forum.
David.
From [EMAIL PROTECTED] Thu Mar 09 07:33:35 2006
Received: from ms-smtp-03.texas.rr.com ([24.93.47.42]
helo=ms-smtp-03-eri0.texas.rr.com)
by www3.qth.com with esmtp (Exim 4.52) id 1FHLGp
Anandtech.com has a review of a PC that looks just like a macmini. Might be
just the ticket to with the SDR-1000 if you have the firewire sound card box
to go with it.
http://www.anandtech.com/systems/showdoc.aspx?i=2707
--
If you can read, thank a teacher. If you can read in English., thank a
Just what we need. More RF floating around in the shack.
73
KB0FHF
--
David H Hickman
- Ken - N9VV [EMAIL PROTECTED] wrote:
Very interesting. Wireless USB (firewire and bluetooth too) is
about to debut: http://news.zdnet.com/2100-9584_22-6046560.html
Wireless USB runs
as a mythbox client.
It seems to me that the home built pvr is the market that this type of pc is
made for.
--
David H Hickman
- Jim Lux [EMAIL PROTECTED] wrote:
At 10:12 AM 3/7/2006, David Queen wrote:
Anandtech.com has a review of a PC that looks just like a macmini.
Might be
just
Is the CPU usage on the test drive of PowerSDR listening to a way higher
than normal use? I am getting 40% cpu usage on my Athlon64 3000+ system.
Hmmm... I just ran the program for the 2nd time and now the CPU usage is
100% and no audio.
--
Partial foot in mouth. The current 100% cpu usage is due to the defrag
program running. Sorry about that. Its very early is my only excuse. The no
audio was another foot in mouth issue to silly to give the reason. Lets just
say it concerns a yellow button.
I have got to learn not to post before
Looking through the Flex Forum I came across a schematic for a Parallel port
conditioner. Is this required when connecting a SDR-1000 to PC parallel port?
Thanks
David.
From [EMAIL PROTECTED] Sun Mar 05 11:52:42 2006
Received: from ylpvm12-ext.prodigy.net ([207.115.57.43]
helo=ylpvm12
Is there a way if a VERY strong signal just happens to be on the
11khz IFimage to move the IF so the image is outside the audio pass band of
interest? I had the silly idea of if the software sensed the image was
strong enough to be a problem to move it automatically.
Would this be useful or just
Would there be any advantage to multipoint IQ balancing like VE3NEA uses in
Rocky 1.41
http://www.dxatlas.com/Rocky/.
It looks like you start the calibration and let the software go over night
and it searches over and over for strong signals and computes the balanced
needed at each frequency as
to it as soon as I can since
this will get us instantaneous perfection.
Bob N4HY
David Queen wrote:
Would there be any advantage to multipoint IQ balancing like VE3NEA uses
in
Rocky 1.41
http://www.dxatlas.com/Rocky/.
It looks like you start the calibration and let the software go
I live in an Aprtment and think it would be better if I kept my power output
low. Around a watt.
This will make it a bit of more of a challenge making contacts but so be it.
How well does the 100w/auto tuner work as a QRP rig? Also I want to try
really low power out less than a tenth watt for
Looking for a used unit - boards or complete.
David
KM5TZ
From [EMAIL PROTECTED] Sun Feb 19 15:30:35 2006
Received: from wproxy.gmail.com ([64.233.184.199])
by www3.qth.com with esmtp (Exim 4.52) id 1FAw8Y-0003v0-JT
for FlexRadio@flex-radio.biz; Sun, 19 Feb 2006 15:30:34 -0600
Will the requirement that drivers be signed in vista have an impact on
PowerSDR?
From the http://it.slashdot.org/article.pl?sid=06/01/23/1719232 comments.
...
In other words, it's Microsoft's way of shutting any open source project out
of Vista development. Think about it, unless they all use
Eric and Group: Mine runs just fine until I activate the receive eq
Dave-W4DWG
I take it back. The close in phase noise fro the 9854 on the data sheet seems much better.
But still one one analog path with a Johnson counter vrs 2 paths on frequency, which would be better?On 12/22/05, David Queen
[EMAIL PROTECTED] wrote:Part of the reason the SDR1000 is so good with strong
Would having a 2nd refence for the DDS chip and being able to select between 200mhz and oh for example161.1328MHzbe a cure for the spurs? The frequency where the spur occurs would shift and surely a PC could do the math to provide the DDS with the proper number to hit the same frequency.
-- If you
I seem to remember in the QEX articles the the performance curve on the QSD chip started to get worse right about 10 meters. Are there better choices out there now?
I have been thinking a lot bout the SDR the last few weeks and about the New IC-7000.
I am having a hard time resolving in my mind
Wallace Watson wrote:
David,
Make absolutely sure that you have connected the SDR cabling to the
Delta 44 sound card as advised in the Delta 44 Quick Start Guide
available from the www.flex-radio.com/Download
http://www.flex-radio.com/Download website page.
The bulk of that information
David Broger wrote:
David,
I would be suspicious of the output voltage from the line-out from your
sound card. I would recommend that you use the calibration routine for
determining the line-out voltage, thus with the M-Audio Delta 44 sound
card and utilizing the recommended
is not constant - it goes form 5W to15W. Restart the computer
or the sdr1k doesn't solve the problem. After successfull calibration
and restart the system it could there is low power. With 1.4.4 there ist
the same behavior. What's the Problem?
David, HB9RVS
Hello to All: Just installed Preview 3. When transmitting in SSB the
monitor is on all the time-loud feedback Anyone else seeing this happen?
Dave-W4DWG
Hello to All : When connecting the card I found that in order to
transmit in ssb I had to jumper the via's for the mic ground. Is this
the experience of others? If not, share your experience.
Dave-W4DWG
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Giuseppe Campana
Sent: 24 August 2005 08:43
To: flexRadio@flex-radio.biz
Subject: [Flexradio] SDR EuroNET proposal
Hello Euro-SDXER,
How many FLEXer we are ?
We can try to make a NET
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Larry Taft
The wierd mic jack was used on lots of radios including the Drake
TR-7's. I have repaired many TR-7s for a variety of ills but NEVER for a
bad mike plug or jack. The 4
Hello to All: I noticed that when I change the Tx bandwidth on the low
setting that my receive bandwidth seems to change. I am running 1.3.12,
Delta 44, USB control line, P-4 1.7 processor. Delta 44 DMA buffer at
512, Card 1 buffer at 1024. Run up the transmit low side bandwidth and
the
Hello: Anyone noticing lower audio output with this version?
Dave-W4DWG
701 - 732 of 732 matches
Mail list logo