Reducing the price to $2100. Anyone interested?
73, Jerry
On Wed, Sep 5, 2012 at 11:34 AM, Jerry Gardner wrote:
> I have a Flex-5000A for sale in like new condition. No cosmetic
> defects/works like new. Non-smoking shack/no pets. Unit is still under
> factory warranty. Includes bo
I have a Flex-5000A for sale in like new condition. No cosmetic
defects/works like new. Non-smoking shack/no pets. Unit is still under
factory warranty. Includes box and all factory-supplied items.
Photos available upon request. Asking $2200 (postal money order/certified
check). Will pay shipping/
On Mon, Nov 28, 2011 at 10:31 AM, Brian wrote:
>
> My opinion is that with digital processing it is impossible to eliminate
> the
> delay completely, so if sidetone is preferred it needs to be generated at
> the key.
I agree. I've measured around a 40 msec lag when using the internal keyer
in m
What is the best way to set output power levels for digital modes? I can
think of two possibilities:
1. Set Drive to 100 and adjust TxGain until ALC reads 0 dB. Then set output
power level by adjusting the Drive slider.
2. Leaving Drive set to 100 and adjusting TxGain to set the power output on
t
On Thu, Mar 10, 2011 at 1:48 AM, Nick Pugh K5QXJ wrote:
> Hi all
>
> I am new to flex. I am trying to get my 5000 working with WSPR via VAC. I
> have the tx working . I see waterfall display on the rx but can not decode
> it. I have set the rx from +10 to -10 with no joy. Suggestions??
>
I'm ass
I installed 2.0.19 RC1 and am using it with my 5000A. On 20m phone, ANF
works very well. It knocks carriers from people tuning up down to
inaudibility.
On 15 meters, however, ANF barely makes a difference. I'd say it only knocks
carriers down by about 20 dB.
Has anyone else seen this? Why should
On Mon, Feb 21, 2011 at 5:39 PM, wrote:
> I am running a Flex 5000A with Audio settings – Buffer 512 – Sample Rate
> 4800 and PowerSDR 2.0.19.
>
> When using an external keyer and using semi break-in, I find if a dit is
> sent at about 25 wpm, it is lengthened. For example, if an "’I'’ ( .. ) is
On Mon, Feb 14, 2011 at 8:14 AM, Ray - K9DUR wrote:
> Jerry,
>
> What version of PowerSDR are you using? (Always an essential piece of
> information.)
> What is the "PTT Delay" setting?
> What CW Speed are you using?
>
PowerSDR 2.0.16. I think you're right about the PTT delay setting. I've left
I'm using CWX to call CQ in CW. When I set the "Drop Delay" value in CWX to
a low value (e.g. 150msec), the spacing between letters and words is greatly
exaggerated when the keyer sends the contents of the memory. If I set Drop
Delay to a larger value, say 300msec, the sent code sounds fine.
The m
On Thu, Feb 10, 2011 at 3:32 PM, William H. Fite wrote:
> Now that's just nasty.
>
>
Sorry. Just couldn't resist a setup line line that.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_fl
On Thu, Feb 10, 2011 at 12:45 PM, Brian Lloyd wrote:
>
> Oh baby, I like it all the way wet.
>
That's what she said.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive
On Thu, Feb 10, 2011 at 10:17 AM, Tim Ellison wrote:
> No, those issues were not addressed in 2.0.17. They are on the list.
>
When are they scheduled to be addressed? Right now, NB/NR/NB2/ANF either
don't work at all, or cause more harm than good (e.g. "growling" when NB is
engaged).
__
On Thu, Feb 10, 2011 at 8:20 AM, Bob McGwier wrote:
>
> I cannot wait for all of you to get the 2.0.17 release coming very soon.
> All this crap just disappears and CW is what it should be. Hang in there.
> We are close.
Will 2.0.17 also fix the issues with NB/NR? With the settings several fo
On Mon, Feb 7, 2011 at 10:34 AM, wrote:
> Jerry,
>
> What settings are you using for Sample Rate and Buffer?
>
> May I suggest Sample Rate 192K, Buffer 512. With your fast quad core PC,
> your PC will handle this setting. Also, DSP CW should be for CW, RX-2048/
> RX- 1024.
>
>
I tried these
On Mon, Feb 7, 2011 at 10:34 AM, wrote:
> Jerry,
>
> What settings are you using for Sample Rate and Buffer?
>
>
John,
I'm not at the rig right now and can't remember the settings. I'll take a
look tonight and try the settings you suggest. Thanks.
73,
Jerry
_
I'm running PowerSDR 2.0.16 with a Flex-5000A. My PC is a fast quad core
machine with 8GB RAM running Windows 7 x64. I run only PowerSDR on this
machine and nothing else and have turned off all unneeded Windows services.
How can I get the lag in the PowerSDR generated side tone down to an
acceptab
I'm using PowerSDR 2.0.16 with a 5000A. The manual says that the "Disable
Monitor" box, when checked, will disable the CW side tone generated by the
5000A. It does not -- even with this box checked, I'm still hearing the
rig's side tone in my headphones in addition to my external keyer's side
tone.
On Wed, Jan 26, 2011 at 5:37 PM, Alan NV8A wrote:
> Many months back I made some comments on the cards that are on the list to
> which Tim has referred.
>
> I am now using a Syba SD-LUC-4F, which works fine:
>
>
But this won't help the original poster, who asked about PCI-E boards.
__
On Mon, Jan 17, 2011 at 9:50 AM, Richard Lawn wrote:
> Anyone out there using WSPR with their 5K? Any suggestions on setup or is
> it
> obvious, although nothing is obvious on a Windows PC to the long-time Mac
> user :)? I noticed that in the list of radios supported by WSPR only
> includes the F
What will happen, let's say, if the PC running PowerSDR blue screens while
an attached Flex-5000A is transmitting?
Will the 5000A continue to transmit indefinitely, or will it turn off the
transmitter and go back to receive mode?
Are there any circumstances where a PC hardware or software failure
>
> The Yaesu (Yellow) adapter. Be careful, not all Heil adapters are created
> equal. On the Flex, pin 5 (PTT/Shield Ground) and pin 8 (mic ground) are
> separate. On Yeasu radios they are not, so the Heil adapters vary as to
> what pins are wired and which are not. I was lucky -- the adapter
Anyone know which, if any, of the rig adapters Heil sells for their headset
microphones are compatible with the mic jack pin-out on the 5000A?
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradi
On Wed, Dec 15, 2010 at 2:37 PM, k4xtt wrote:
> Loose stuff from shipping is not a real confidence booster. What else
> needs working on?
>
Not as big a deal as loose parts, but my recently arrived 5000A came with an
Install Guide for the 3000 in the box.
- Jerry
__
On Thu, Nov 11, 2010 at 8:32 AM, Alfred Green wrote:
>
> I can tell you one thing: Trying to measure or define Lines Of Code
>> (LOCs) per day is a pointless exercise. I've never met ANYone in the
>> industry who thinks this is a valid measure. It varies widely based on the
>> language and th
24 matches
Mail list logo
