Me thinks it's time to move on to another subject so we can beat it death...
:)John W8JJW
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of William H. Fite
Sent: Friday, December 09, 2011 11:48 AM
To: Ron Kolarik
Cc: flexradi
Actually, AClog will do the same thing, has a built in DX cluster, keeps
track of contacts, etc. Easy clean interface with minimal resources used.
John W8JJW
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jack Haverty
Sent
The SWR is just part of the equation. What is the R= and the X= and the
impedance at the lowest SWR? Your MFJ analyzer
Can indicate these.
John W8JJW
-Original Message-
From: John Isaacs [mailto:isaacs...@charter.net]
Sent: Saturday, September 03, 2011 3:18 PM
To: John Wagner
Cc
Take a look at the Ameritron 811H - 600 watts. Very nice amp for the money.
73 John W8JJW
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Michael Therrien
Sent: Friday, September 02, 2011 9:14 AM
To: Flex Radio (flexradio@f
Rick, Works great. I have a F5000, PSDR. Uses same VAC in/out as other
programs. I use the DIGIU mode so you can set the levels from the main
screen. Receive level is fairly important.
Digital pictures are really crisp and clear. This is a digital only software
and will not decode analog, so keep
All, As I understand this, when using RX2 with a receive-only antenna ( for
example) and the RX2 input configured to RX2 IN, there is no protection
for RX2 during transmit. The only time there is protections for RX2 occurs
when the input is set to RX1 Tap. Makes using a separate antenna on RX2 a
po
_
From: Greg [mailto:a...@cablespeed.com]
Sent: Friday, July 29, 2011 10:26 AM
To: John Wagner
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] 5000A Mic pinout
If your cable has and adapter or has been modified to use with their RJ45
plug the pin outs are different. It uses pins 2 and 3
I'm sure this has been posted and answered a gazillion times, I have
searched and found nothing that addresses my question.
I'm a new user of the 5000A, I have a Heil Proset with the Yaesu adapter
cable and a Heil footswitch.
I was originally told by folks in the Flex booth at Dayton that the m
8 matches
Mail list logo