Bill,
If you haven't already checked, launch WSJT, goto setup then options, and
confirm that your audio input device is 4 and the audio output device is 9
according to your WSJT screen. I have noticed that depending on which order
you started the Flex and WSJT, the device map can change.
Terry,
You can use your VHF contesting software to control the switching. I'm using
N1MM (could use Writelog or others) through VAC to communicate via CAT on
the Flex. When you switch bands, the Flex will follow with no clicking
involved. I'm setup to switch from 6m to 10G with direct entry
Starting this past weekend, after selecting the VHF+ button using a xvtr on 2m,
when I return to HF there are no signals on any band. Restarting PSDR does not
resolve the problem, however, restarting the Flex and then PSDR will bring back
the HF signals. If I stay in HF the signals remain. If I
I noticed a video on a post abt 3 weeks ago that showed on the Flex front
panel, an antenna selection for rx and tx that displayed: xvtr/com and not
ant1. I am using a DEMI 144-28 xvtr on a Flex 5000A through the xvtr/com port
and get Ant 1 as the display. I cannot find an option to choose
running a 5000A with SDR 1.18.6
I will be upgrading the software after I receive my VU upgrade but here is the
issue at the moment. I am using 6m from the HF band table with 15 watts drive
to my amp. I also have a 222 xvtr setup using the VHF+ band table set at 100%
drive to the xvtr. However,
5 matches
Mail list logo