I am not able to get CW Skimmer v 1.71 to decode properly with PowerSDR
v2.4.4 and a Flex-3000.
The radio CAT commands seem to be working correctly using PowerSDR v2.4.4
and DXLabs Commander. CW Skimmer is setup as a secondary CAT control in
Commander using Kenwood CAT protocol. The correct
Bernie and others,
I am seeing something similar. I see no noise in the CW skimmer
waterfall. I use the cat data from DDUtil which is being displayed in
the frequency box. Also I checked the operation of the VAC channels
using WW in both PKS31 and RTTY and that worked FB. I have checked my
What are the settings of your VAC cables?
Tim Ellison
On 9/5/2012 2:53 PM, George wrote:
Bernie and others,
I am seeing something similar. I see no noise in the CW skimmer
waterfall. I use the cat data from DDUtil which is being displayed in
the frequency box. Also I checked the operation
Unfortunately, it¹s always been configured to use WDM-KS.
-73-
Bernie
W4BGH
---
on 9/5/12 2:45 PM, Rich - W3ZJ at r...@w3zj.com wrote:
That's working OK here Bernie. Note that if you had previously configured your
VAC Audio to use MME it is now confgured to use WDM-KS under V2.4.4
SR Range: 8000..192000
BPS Range: 8..16
NC Range: 1..2
Stream Fmt Limit: Cable Range
Volume Ctl: Disabled
SR: Cable #1 - 12000; Cable #2 - 96000
BPS: 16
NC: 2
RC Stms: 1
Pb Stms: 1
Bernie
W4BGH
-
on 9/5/12 3:01 PM, Tim Ellison at t.m.ellison...@gmail.com wrote:
What are the
Looks like you started CWSkimmer before PowerSDR with the VAC button
enabled was started.
SR: Cable #1 - 12000; Cable #2 - 96000
The sampling rates for both should show 96K is working properly.
Tim Ellison
On 9/5/2012 3:14 PM, Bernie Huth wrote:
SR Range: 8000..192000
BPS Range: 8..16
NC
Did I not read something about VAC cable 1 and 2 reversing in the latest
version of PSDR..?
73...VE6ZT
- Original Message -
From: Bernie Huth bh...@garlic.com
To: flexradio@flex-radio.biz
Sent: Wednesday, September 05, 2012 12:03 PM
Subject: [Flexradio] CW Skimmer with PowerSDR
Tim,
I found the problem. After the upgrade Skimmer decided to use VAC 34
instead of 12. Once this was changed it started to work. I don't know
why Skimmer picked the different audio channels but it happened. Thanks
for looking at the problem.
73 George
W2GS
On 9/5/2012 2:16 PM, Tim
8 matches
Mail list logo
