I use a PR40,
But if you want a pleasant, inexpensive alternative, try a Behringer 8500. It's
about 26 bucks at Musicians Friend and I bet you cannot tell the difference on
the air.
Harry
W9BR
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.bi
On Thu, Dec 8, 2011 at 2:53 PM, Don Baughman wrote:
> I have been using headsets for years with all my radios including all 3 of
> the Flex radios. I presently use a Heil ProSet with a HC-5 element with
> great success. I have tried using electret-based (computer-type) headsets
> with mixed res
Thanks, Tim. Some additional discussion if you don't mind:
1. More input lines on PC
True, but the input is digital. Am I right that digital input into the
PC would be less susceptible to RFI than analog input into the radio?
Regardless, RFI has not reared its ugly head in my shack, but I've
s
If your PC and external sound devices do not impart unacceptable
latency, then the only real "cons" for configuring the AF signal paths
this way are:
- More input lines on the PC that can be ingress points for RFI
- The D/A and A/Ds in the FLEX-3000 probably have greater dynamic range
than the
So I'm a little confused about the advantages of connecting audio
directly to the radio (but note I'm very new to this hobby and to my
Flex 3000). My microphone, speakers, and headphones are all connected
directly to my computer through USB ports (I have no sound card and have
disabled the moth
ve Gomberg
Sent: Wednesday, December 07, 2011 4:06 PM
To: Brian Lloyd; Bob
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Microphones and headsets
At 10:58 12/7/2011, Brian Lloyd wrote:
>Flex brings +5v to the mic jack to use as bias for electret mics.
Is that true on the F3K as well on the
On Wed, Dec 7, 2011 at 1:05 PM, Dave Gomberg wrote:
> At 10:58 12/7/2011, Brian Lloyd wrote:
>
>> Flex brings +5v to the mic jack to use as bias for electret mics.
>>
>
> Is that true on the F3K as well on the RJ-45 on the front panel?
Yes, and the 1500 too.
Flex 5000:
1 - NC
2 - mic bias (+5)
At 10:58 12/7/2011, Brian Lloyd wrote:
Flex brings +5v to the mic jack to use as bias for electret mics.
Is that true on the F3K as well on the RJ-45 on the front panel?
--
Dave Gomberg, San Francisco NE5EE Programming since 1959
All addresses, phones, etc. at http://www.wcf.com/ham/in
On Wed, Dec 7, 2011 at 10:20 AM, Bob wrote:
> Hi to the group. I've been thinking about using a headset for my flex5000A.
> (dangerous thing thinking !). I want to try a standard gaming headset which
> comes with a mike and a headphone mini jacks and do the audio shaping with
> the Flex. The ques
Hi to the group. I've been thinking about using a headset for my flex5000A.
(dangerous thing thinking !). I want to try a standard gaming headset which
comes with a mike and a headphone mini jacks and do the audio shaping with
the Flex. The question is, that I remember at one point in time that the
Then cable it up to use the FlexWire connector audio input
http://kc.flexradio.com/KnowledgebaseArticle50449.aspx
-Tim
From: Michael Goins [mailto:wmgo...@gmail.com]
Sent: Monday, June 13, 2011 11:25 PM
To: Tim Ellison
Cc: Jim Jerzycke; FlexRadio List
Subject: Re: [Flexradio] microphones
1500
hey don't have a junk bin, ask the repair guy or guitar guru if you can go
dumpster diving, and give him $10 for lunch money.
Let me know how you make out!
73
Dan
K0DAN
- Original Message -
From: Michael Goins
To: K0DAN
Sent: Monday, June 13, 2011 9:52 PM
Subject: Re:
ssage-
> From: flexradio-boun...@flex-radio.biz [mailto:
> flexradio-boun...@flex-radio.biz] On Behalf Of Jim Jerzycke
> Sent: Monday, June 13, 2011 10:20 PM
> To: Michael Goins
> Cc: FlexRadio List
> Subject: Re: [Flexradio] microphones
>
> Monoprice has the XLR cables,
2011 10:20 PM
To: Michael Goins
Cc: FlexRadio List
Subject: Re: [Flexradio] microphones
Monoprice has the XLR cables, but since the 8-pin connector is rarely used
outside of Amateur Radio, you're at the mercy of niche vendors!
http://www.monoprice.com/products/search.asp?keyword=xlr&x=
ot;
Sent: Monday, June 13, 2011 9:20 PM
Subject: Re: [Flexradio] microphones
Monoprice has the XLR cables, but since the 8-pin connector is rarely used
outside of Amateur Radio, you're at the mercy of niche vendors!
http://www.monoprice.com/products/search.asp?keyword=xlr&x=0&y=0
Monoprice has the XLR cables, but since the 8-pin connector is rarely
used outside of Amateur Radio, you're at the mercy of niche vendors!
http://www.monoprice.com/products/search.asp?keyword=xlr&x=0&y=0
73, Jim
On 06/13/2011 08:27 PM, Michael Goins wrote:
Anyone have a good source of cables
Musician's Friend
ZZSounds
B&H
Cable to Go
Sweetwater
-Tim
---
W4TME
FlexRadio Systems Internet Systems Admin.
Product Verification Team
Tune In Excitement^(TM)
On 6/13/2011 4:27 PM, Michael Goins wrote:
Anyone have a good source of cables - they are pretty expensive with Heil.
Female XLR to M
Anyone have a good source of cables - they are pretty expensive with Heil.
Female XLR to Male XLR and Female XLR to Flex connector.
mike, k5wmg
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexra
@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: Wednesday, June 24, 2009 9:09 AM
To: jgre...@bowfiredepartment.org; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Microphones
Whichever headset you get, make sure the mic element is (1) dynamic to
preve
Check out YAMAHA CM500 HEADSET W/BOOM MICROPHONE. Eham has reviews,
http://www.eham.net/reviews/review/78936
About $50 delivered, order the Heil Pro Set adapter (Yellow one) and you're set
to go. Been using mine with a Flex 3000, good reports received.
The only negative, these are not light
On Wed, Jun 24, 2009 at 9:43 AM, Doug McCormack wrote:
> I used the Heil Proset Plus for about 8 months with my Flex 1K, D44 with
> M-Audio Preamp. I honestly cannot recommend this headset for Flex users.
>
> I agree with Tim, that Flex users can get the sound of the Heil 4 DX element
> by adjusti
I used the Heil Proset Plus for about 8 months with my Flex 1K, D44 with
M-Audio Preamp. I honestly cannot recommend this headset for Flex users.
I agree with Tim, that Flex users can get the sound of the Heil 4 DX element
by adjusting their Flex transmit width and 10 band equalizer, then save th
-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of FF Jason Greene
Sent: Wednesday, June 24, 2009 9:22 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Microphones
Hi, everyone. I am the proud new owner of a 3000, and I am in search of
microphones.
I am considering the
I'm using a Heil BM10 lightweight headset with HC-5 element.
No complaints about build quality or audio reports.
73,
Wayne
K4ELO
k4...@fastmail.fm
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/f
FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Microphones
Get the quiet set pro. Kills a lot of background noise.
Tom ac5tm
Tom Miller 504 715-7185
- Original Message -
From: flexradio-boun...@flex-radio.biz
To: FlexRadio@flex-radio.biz
Sent: Wed Jun 24 09:22:26 2009
Subject:
Get the quiet set pro. Kills a lot of background noise.
Tom ac5tm
Tom Miller 504 715-7185
- Original Message -
From: flexradio-boun...@flex-radio.biz
To: FlexRadio@flex-radio.biz
Sent: Wed Jun 24 09:22:26 2009
Subject: [Flexradio] Microphones
Hi, everyone. I am the proud new owner of a
Hi, everyone. I am the proud new owner of a 3000, and I am in search of
microphones.
I am considering the Heil Pro-Set Plus with the dual elements, which
will get me through Field Day, and then I can work on something else for
rag chewing in the shack.
Any comments on that headset?
Thanks
k 33-3018 which was suggested by someone here in
> order to "kick up the meters". Can you share your EQ settings?
>
> Thanks!!
>
> Edwin Marzan
> AB2VW
>
> > Date: Thu, 29 Nov 2007 15:20:44 -0600
> > From: [EMAIL PROTECTED]
> > To: flexradio@
Hello!
I have a Radio Shack 33-3018 which was suggested by someone here in order to
"kick up the meters". Can you share your EQ settings?
Thanks!!Edwin MarzanAB2VW> Date: Thu, 29 Nov 2007 15:20:44 -0600> From: [EMAIL
PROTECTED]> To: flexradio@flex-radio.biz> S
al Message -
From: "Carl Vangsness" <[EMAIL PROTECTED]>
To:
Sent: Thursday, November 29, 2007 4:20 PM
Subject: Re: [Flexradio] microphones for SDR1000, etc.
Just to add some spice to the sauce, my microphone of choice (because I
already had it) has been the Radio Shack
Just to add some spice to the sauce, my microphone of choice (because I
already had it) has been the Radio Shack 33-3018 dynamic microphone
direct into the FA66 sound card. Get great comments on the audio with
some tweaking on the 10-band equalizer. Low voice, need more highs.
Used to get very
I have a D-104 xtal mike with about 300K in series and it works just
fine with my SDR1K. W8XO
Jim, W4ATK wrote:
> Yes there certainly are. If you will check with Heil sound, they have a
>very nice conversion kit for the D-104. Just remove the salt crystal element
>and replace it with the H
Ed,
Heil has a mod to put an HC-5 mic element in a D-104. I picked one up at
the Fort Wayne Hamfest last week & plan to try it on my 5000a when it
arrives in a week or so.
73, Ray, K9DUR
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://m
Yes there certainly are. If you will check with Heil sound, they have a
very nice conversion kit for the D-104. Just remove the salt crystal element
and replace it with the Heil Sound unit, solder a couple of wires and
voila', a D104 that works great with the Flex 5000. I know, that is what
I think I saw an element for the D-104 on the Heil site but I don't remember
for sure.
Steve - K5FR
-Original Message-
Are there any mods to make the D-104 actually work with an SDR-1000?
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
h
20:09:42 -0600> CC: FlexRadio@flex-radio.biz> Subject:
Re: [Flexradio] Microphones for 5000> > :-) The video was supposed to be just
for fun and for private viewing.> Unfortunately, I mistakenly put it in a
public folder when it should have> been listed for private viewing.>
AIL PROTECTED]>; <[EMAIL PROTECTED]>; "'Tom Clark, K3IO'"
<[EMAIL PROTECTED]>
Cc: "'[EMAIL PROTECTED] Biz'"
Sent: Saturday, November 24, 2007 9:14 AM
Subject: RE: [Flexradio] Microphones for 5000
> So I guess you forgot to tell John ab
PROTECTED] Biz'
Subject: Re: [Flexradio] Microphones for 5000
I think we should cut John P considerable slack for his video. After all,
anyone who appreciates the Astatic D-104 mike and has undoubtedly made the
impedance corrections needed for some new equipment simply can't be a bad
per
CTED]>
To: <[EMAIL PROTECTED]>; "'Tom Clark, K3IO'" <[EMAIL PROTECTED]>
Cc: "'[EMAIL PROTECTED] Biz'"
Sent: Friday, November 23, 2007 8:09 PM
Subject: Re: [Flexradio] Microphones for 5000
> :-) The video was supposed to be just for fun and
: Friday, November 23, 2007 7:21 PM
To: Ken N9VV; Jim, W4ATK
Cc: Tom Clark, K3IO; [EMAIL PROTECTED] Biz
Subject: Re: [Flexradio] Microphones for 5000
Ken
That video was taken at his Antarctica shack where it is daylight all day
now. Yea, that's it. His Antarctica shack (wink, wink).
BTW, you
23, 2007 7:48 PM
To: Tom Clark, K3IO
Cc: [EMAIL PROTECTED] Biz
Subject: Re: [Flexradio] Microphones for 5000
Tom Clark, K3IO wrote:
> In case you haven't seen this, take a look at how John (W5GI) wasted his
> Thanksgiving (or got wasted on thanksgiving):
> http://uncutvideo.aol
Tom Clark, K3IO wrote:
> In case you haven't seen this, take a look at how John (W5GI) wasted his
> Thanksgiving (or got wasted on thanksgiving):
> http://uncutvideo.aol.com/videos/d668be0da963287babed9e641712007a
>
> Next time, comb your hair!
>
> 73, Tom
>
>
Wow, I'm laughing so hard, now that
PROTECTED] Biz; Tom Clark, K3IO
Subject: Re: [Flexradio] Microphones for 5000
I thought he said it was 3:00am and they would be starting their day. But it is
light outside the windows behind him and the date and time of the file on AOL
is 9:28am 11/22/20007.
Jim, W4ATK wrote:
> Boy, that
I thought he said it was 3:00am and they would be starting
their day. But it is light outside the windows behind him
and the date and time of the file on AOL is 9:28am 11/22/20007.
Jim, W4ATK wrote:
> Boy, that explains a lot! Ah thinks John has found
> the kick-a-poo joy juice!
_
PM
To: [EMAIL PROTECTED] Biz
Subject: [Flexradio] Microphones for 5000
In case you haven't seen this, take a look at how John (W5GI) wasted his
Thanksgiving (or got wasted on thanksgiving):
http://uncutvideo.aol.com/videos/d668be0da963287babed9e641712007a
Next time, comb your hair
: vr 23-11-2007 23:31
Aan: [EMAIL PROTECTED] Biz
Onderwerp: [Flexradio] Microphones for 5000
In case you haven't seen this, take a look at how John (W5GI) wasted his
Thanksgiving (or got wasted on thanksgiving):
http://uncutvideo.aol.com/videos/d668be0da963287babed9e641712007a
Next time, comb
In case you haven't seen this, take a look at how John (W5GI) wasted his
Thanksgiving (or got wasted on thanksgiving):
http://uncutvideo.aol.com/videos/d668be0da963287babed9e641712007a
Next time, comb your hair!
73, Tom
___
FlexRadio mailing list
FlexR
47 matches
Mail list logo
