You have recorded the audio incorrectly for playing IQ files. The Quick
Record and Playback controls are intended for playing back audio
recorded off the air back *over* the air and they are not suited for
playback if you are not transmitting.
Here is the procedure for what you are wanting
On 1/31/2012 7:29 AM, Tim Ellison, W4TME wrote:
[...]
The IQ recorded audio will not be on frequency. There isn't any meta
data in the IQ recording to tell the DDS how to set itself properly
so that the VFO matches the frequency you recorded at.
[...]
Is there a way to _make_ it show correct
Yes, you can offset the radio VFO when you start the IQ recording. If
you put the VFO dial frequency on the frequency listed in the file name,
it will be off by the DDS offset (methinks) which is - 9 KHz by
default. I haven't tried this in about 2 years so I am a little unsure
of the
I tried this on both F5K and F1.5K and get same results
Spectrum Recording procedure
- Click 'Wave' on the menu (in PWRSDR) to open the Wave Panel
- Set TX Gain 0 dB
- Click 'Quick Rec' button to start recording (turns Yellow)
- Click the 'Quick Rec' button again and it stops recording (turns
4 matches
Mail list logo
