dudley,
I copied the link on your e-mail, sample rate sync, but still have the
garbage, can you think of anything else I can tweak.
thanks
73,
Johnnie w6hty
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailm
Hi All,
I m running FlDigi .73 and vista on the computer, with Flex-3000.
I get a good signal on the waterfall, but text prints about 80% the rest
garbage.
What can I tweak or do?
Johnnie W6HTY
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.
I am running fl3000, with Fldigi, on PSK-31 the receive the text is
intermittent. What settings do I have wrong?
Thanks. 73, Johnnie W6HTY
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_f
Murphy's law must be at work, after one day of operation with several QSO's on
DM780, my SDR program start-up did not go wellunstable operation of the
program occurred, ie number of the settings where flashing and if started, the
white noise took over. Only way to get the program to quite
.
Dave W0DHB
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Roger Schmitt
Sent: Sunday, January 15, 2012 9:00 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] PSK Settup
I am new to both Flex Radio and this Reflector so if
I am new to both Flex Radio and this Reflector so if this subject has been
ask/answered please excuse.
I finally got my laptop to work with Power SDR and HRD/DM780.
Two features I have used with my IC7000 on PSK is RSID and Centering box on
setting 1500hz to change the Radio frequency to Cente
One of the best write ups for setting up digital modes with PowerSDR can
be found here
https://fedorahosted.org/fldigi/wiki/Documentation/HOWTO/PowerSDR
-Tim
---
W4TME
FlexRadio Systems Internet Systems Admin.
Product Verification Team
Tune In Excitement^(TM)
On 6/27/2011 10:55 AM, Tony Estep
Mike, check on the knowledge base for the instructions for connecting MixW,
VAC, and VSP. That will get you on PSK. You can find it here:
http://kc.flexradio.com/KnowledgebaseArticle50230.aspx?Keywords=mixw
Even if you have a PSK program other than MixW, the info in this file will
get you on the
Is there some sort of step-by-step for putting a Flex (specifically a 1500)
on psk? Can't seem to find a lot but I'm a newbie to SDR and I'm just
getting set up.
Mike, k5wmg
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-rad
en by deflation, the banks will deprive the people of
all property
until their children wake up homeless.
-Thomas Jefferson
> To: ke...@goobie.org; gos...@twcny.rr.com; flexradio@flex-radio.biz
> From: ke...@goobie.org
> Date: Wed, 13 Apr 2011 18:51:32 +
> Subject:
o.biz
Date: Wed, 13 Apr 2011 18:36:06
To: ;
Reply-To: ke...@goobie.org
Subject: Re: [Flexradio] PSK problem .
Hi
What version of VAC and MixW?
What is TX audio level set to.
Are you in Digu or USB?
Answers will help diagnosis.
Keith
Sent wirelessly from my BlackBerry device on the Be
, 13 Apr 2011 14:22:24
To:
Subject: [Flexradio] PSK problem .
Got MixW on and recieves great but no transmit . VAC is good and input
,output seems right ... Flex 1500 here
Thanks !!!
George , N2JNZ
___
FlexRadio Systems Mailing List
Got MixW on and recieves great but no transmit . VAC is good and input
,output seems right ... Flex 1500 here
Thanks !!!
George , N2JNZ
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/
5K
were working other than PSK transmit. Hopefully anyone with a similar
problem will see this mail and avoid wasting time like I did. Thanks
Dudley, WA5QPZ.
73//k5mm/ron
-Original Message-
Sent: Wednesday, October 21, 2009 2:51 PM
To: FlexRadio@flex-radio.biz
Subject: Re: [Flexradio
Ron,
Are you using the same program to generate the RTTY? If you turn your
MONitor on in PowerSDR, you should hear the PSK tones, if not, the
VAC setting out of Winwarbler may be messed up..
73,
Dudley
WA5QPZ
Ron Freeman wrote:
I'm a new Flex 5000 user. I'm using PSDR 1.18.3, DXLab
I'm a new Flex 5000 user. I'm using PSDR 1.18.3, DXLab 8.04, Winwarbler
6.5.1 and VAC 4.9X
I set up the software based on the DXLabwiki guides, setup articles by N4HY
and W9OL and manuals. All modes work fine including PSK receive but I
cannot transmit PSK. My Winwarbler Config tab PSK transcei
I got the PSK (Digipan) and RTTY (MMTTY) working just fine with the help of
Joe, AB1DO, and Mel K0PFX. Thanks much for the help. Bob Lusby, k9foh
-- next part --
An HTML attachment was scrubbed...
URL:
/pipermail/flexradio_flex-radio.biz/attachments/20060707/093a02f1/at
Bob,
At the risk of being too expansive, let me see if I can answer your
questions.
First, just to make sure that everything is clear in your mind, N8VB's vCOM
utility enables the creation of virtual COM port pairs and is used to
connect from 3rd party software to PowerSDR for CAT control and/or
f Bob Lusby
Sent: Wednesday, June 21, 2006 6:09 PM
To: flexradio@flex-radio.biz
Cc: Bob Lusby
Subject: [Flexradio] PSK & RTTY setup
I am a fairly new subscriber and SDR1K owner seeking guidance on
setting up Digipan PSK-31 and MMTTY. I am getting a bit confused with
the various VA
I am a fairly new subscriber and SDR1K owner seeking guidance on setting up
Digipan PSK-31 and MMTTY. I am getting a bit confused with the various VAC
program downloads and settings for the Delta 44. My system is:
SDR-100 with 100PA and internal tuner.
AMD Sempron Processorat 1.61ghz w/1
-
EricSent: Thursday, November 10, 2005 6:52 PMTo: 'Robert
Grambau'; FlexRadio@flex-radio.bizSubject: Re: [Flexradio] PSK vCOM
VAC MixW
Rob,
Try moving the VAC
buffers up to 1024 or 2048. That fixed it for AB7R.
Eric
Wachsmann
FlexRadio
ll
around.
Comments please
regards
Ross
- Original Message -
From:
Don Newberry
To: Ross ; FlexRadio@flex-radio.biz
Sent: Friday, November 11, 2005 6:05
PM
Subject: Re: [Flexradio] PSK vCOM VAC
MixW
Ross, if you are using the free trial version of
VAC, th
ay, November 10, 2005 8:26
PM
Subject: Re: [Flexradio] PSK vCOM VAC
MixW
Rob, I have the same set up as you and I just
tried psk without a problem, and using 1.4.5 preview 4 (which has a few
problems of its own).
But I have noticed on the Mixw waterfall that I
get a line ac
@flex-radio.biz
Subject: [Flexradio] PSK vCOM VAC
MixW
I have installed vCOM, bought,
installed and enabled the VAC, set up MixW and successfully sent CW
through the SDR software with the MixW console.
However, MixW doesn't sent PSK
properly. It receives PSK just fine throug
2:36
PM
Subject: [Flexradio] PSK vCOM VAC
MixW
I have installed vCOM, bought,
installed and enabled the VAC, set up MixW and successfully sent CW
through the SDR software with the MixW console.
However, MixW doesn't sent PSK properly. It
receives PSK just fine thro
I have installed vCOM, bought,
installed and enabled the VAC, set up MixW and successfully sent CW through
the SDR software with the MixW console.
However, MixW doesn't sent PSK properly. It
receives PSK just fine through the VAC - a nice waterfall, etc. But on
transmit, my signal is pul
-Original Message-
From: Robert Rennick
[mailto:[EMAIL PROTECTED]
Sent: Sunday, June 19, 2005 5:59 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] PSK 31
To All
Is it now possible to operate
PSK 31 (using DigiPan) with the SDR1000 on one Desktop computer
To All
Is it now possible to operate PSK 31 (using
DigiPan) with the SDR1000 on one Desktop computer?
Also is a second soundcard necessary?
Why?
If so, can an Audigy 2ZS and the motherboard
chipset be used? I had the 2ZS installed and had the motherboard sound
card disabled back in January.
Does anyone know the address for the Flex Radio
link on how to use two sound cards to do PSK-31 on the same computer that is
controlling the SDR-1000?
John Denson
AI6A, Ridgecrest, CA
29 matches
Mail list logo
