More indications:
PowerSDR doesn't read Fwd Pwr and Ref Pwr on any mode or band.
What could be happening ? :-(
Neal Campbell escribió:
You also might check the connection to your printer port. Have you
changed anything recently?
Neal k3nc
On 8/14/07, Ruben Navarro Huedo [EMAIL PROTECTED]
, W4ATK
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ruben Navarro
Huedo
Sent: Wednesday, August 15, 2007 5:18 AM
To: FlexRadio List
Subject: Re: [Flexradio] sdr-1000, problem with atu]
More indications:
PowerSDR doesn't read Fwd Pwr and Ref Pwr on any mode
communication with the SDR-1000.
Jim, W4ATK
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ruben Navarro
Huedo
Sent: Wednesday, August 15, 2007 5:18 AM
To: FlexRadio List
Subject: Re: [Flexradio] sdr-1000, problem with atu]
More indications
Jim, W4ATK escribió:
As I understand, based on an earlier conversation with Eric, one line of
the parallel interface is used in a serial fashion to convey information to
and from the tuner. I suspect from your correspondence you have a problem
with the parallel port and its communication with
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of [EMAIL PROTECTED]
Sent: Wednesday, August 15, 2007 6:57 AM
To: [EMAIL PROTECTED]; flexradio@flex-radio.biz;
[EMAIL PROTECTED]
Subject: Re: [Flexradio] sdr-1000, problem with atu]
I believe he said he
-radio.biz
Sent: Wednesday, August 15, 2007 7:11 AM
Subject: Re: [Flexradio] sdr-1000, problem with atu
Jim, W4ATK escribió:
As I understand, based on an earlier conversation with Eric, one line of
the parallel interface is used in a serial fashion to convey information
to
and from the tuner. I
PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Ruben Navarro Huedo
Sent: Wednesday, August 15, 2007 7:11 AM
To: Jim, W4ATK
Cc: Flex-Radio Reflector
Subject: Re: [Flexradio] sdr-1000, problem with atu
Jim, W4ATK escribió:
As I understand, based on an earlier conversation with Eric
Verzonden: wo 15-8-2007 12:18
Aan: FlexRadio List
Onderwerp: Re: [Flexradio] sdr-1000, problem with atu]
More indications:
PowerSDR doesn't read Fwd Pwr and Ref Pwr on any mode or band.
What could be happening ? :-(
Neal Campbell escribió:
You also might check the connection to your printer
Pete,
You wrote: I believe he said he was using the usb-parallel option.
Actually, the SDR-1000 hardware does not know, nor does it really care,
whether it is connected to an on-board parallel port, to a parallel port on
a PCI adapter board, or to a USB-to-Parallel adapter. The PowerSDR
-radio.com and click on Support - Service and Repair.
Eric Wachsmann
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Ruben Navarro Huedo
Sent: Wednesday, August 15, 2007 5:18 AM
To: FlexRadio List
Subject: Re: [Flexradio] sdr
]
Subject: RE: [Flexradio] sdr-1000, problem with atu]
Pete,
You wrote: I believe he said he was using the usb-parallel option.
Actually, the SDR-1000 hardware does not know, nor does it really
care,
whether it is connected to an on-board parallel port, to a parallel
port on
a PCI adapter
; flexradio@flex-radio.biz
Subject: Re: [Flexradio] sdr-1000, problem with atu
I don't believe that the SDR-1000 reads forward or reflected power when
the
antenna tuner is in a tune cycle. I wonder if the SDR-5000 does?
- Original Message -
From: Ruben Navarro Huedo [EMAIL PROTECTED
Navarro Huedo [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 15, 2007 10:49 AM
To: Eric Wachsmann; FlexRadio List
Subject: Re: [Flexradio] sdr-1000, problem with atu]
Eric Wachsmann escribió:
Now we're getting to the root of the problem. There is a single wire
that
returns information
Eric Wachsmann escribió:
Now we're getting to the root of the problem. There is a single wire that
returns information from the PA and the ATU. It sounds like it no longer
has electrical connection. I would suggest getting in contact with our
support team using the resources available on
Neal Campbell escribió:
You might want to open it up and reseat the cables that connect to it.
The cable is at an odd angle and I think it has some history of
becoming loose.
73
Neal
I finish to do it and the problem continues :-(
I have opened the sdr and i don't see any extrange thing.
No...i use USB adapter and all the rest is running fine.
Neal Campbell escribió:
You also might check the connection to your printer port. Have you
changed anything recently?
Neal k3nc
On 8/14/07, Ruben Navarro Huedo [EMAIL PROTECTED] wrote:
Neal Campbell escribió:
You might want to
When this happens here a shutdown and restart of PowerSDR cures the problem.
Jim, W4ATK
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ruben Navarro
Huedo
Sent: Tuesday, August 14, 2007 6:58 PM
To: Neal Campbell; FlexRadio List
Subject: Re: [Flexradio] sdr
17 matches
Mail list logo