pdate the base stuff,
hopefully that will work out.
Perhaps I might try porting it to something before I create a reall
mess from scratch :-).
Thanks & take care, V.
--
Victoria Welch, WV9K/7, SysAdmin, Embedded Systems Designer.
Like winter snow on summer lawn, time past is time gone.
'
got some kind of library location
hell going on with the system all of a sudden and as soon as I can
figure that out we'll see what we can do.
Thanks & take care, Vikki
--
Victoria Welch, WV9K/7, SysAdmin, Embedded Systems Designer.
Like winter snow on summer lawn, time past is time
Hi Folks and TIA!
I'm thinking I want to get into building panels for FG aircraft.
Either I am missing it or the tools for the job are vi, gimp, an
XML reference and all the FG header files ?!?
Any comments or suggestions appreciated!
Thanks & take care, Vikki.
--
Victoria Welc
ire config.log file. (Send these
> directly to me, not to the list.) What OS are you running?
>
> Curt.
>
> Victoria Welch wrote:
> > Hi Curt,
> >
> > Thanks for the response. I went through config log (~=2500
> > lines :) and am no more enlightended - see be
tSGIX'
1294-collect2: ld returned 1 exit status
1295-configure:7921: $? = 1
Sorry to include so much stuff here, but I am lost :-(.
Is it possible that I have the wrong version of glut? If so, I
would think that configure would blow out ?!?!
Thanks & take care, Vikki.
-=-=-=-=-=-=-
e OpenGL Utility Toolkit (GLUT)
=
So I am confused :-) - would much appreciate any comments on this
issue!
Thanks & take care, Vikki.
--
Victoria Welch, WV9K/7, SysAdmin, Embedded Systems Designer.
Like winter snow on summer lawn, time past is time gone.
'Two of the gravest general
On Monday 05 January 2004 13:44, David Megginson wrote:
> Victoria Welch wrote:
> > I've been burried here lately and haven't had a chance to try
> > someplace else yet, but is there no glideslope on the ils there
> > or do I have a problem? The glide slope ind
On Monday 05 January 2004 13:44, Curtis L. Olson wrote:
> Victoria Welch writes:
> > I've been burried here lately and haven't had a chance to try
> > someplace else yet, but is there no glideslope on the ils there
> > or do I have a problem? The glide slope ind
alized but never found one
and I would think that KSFO surely would have one.
But the VASI works now :-) :-) :-) so all is not lost except in low
vis approaches :).
Thanks & take care, Vikki.
--
Victoria Welch, WV9K/7, SysAdmin, Embedded Systems Designer.
Like winter snow on summer lawn, tim
there is something in the implementation that would allow it to be
used to build a "ball" for carrier operations?
Some time working on the basement will give you time to think about
it and keep the wife happy :-).
Just a thought :).
Thanks & take care, Vikki.
--
Victoria Welch,
Hi Andy,
Thanks for the response.
On Mon, 2002-07-15 at 09:39, Andy Ross wrote:
> Victoria Welch wrote:
> > No jstest or jscal here and I have yet to track them down for
> > something other than SuSE or Debian (or a tarball that has be be
> > compiled into the kern
nd the 1.2.15 stuff will not run with the
version I have .
Thanks & take care, Vikki.
--
Victoria Welch, WV9K/7, SysAdmin, Embedded Systems Designer.
"Walking on water and developing software to specification
are easy as long as both are frozen" - Edward V. Berard.
Do not unto others,
s an area where people
cooperate and help others and, while I am pretty well cooked at the
moment, it inspires me NOT to take the easy (if buggy) way out and go
back to windoz :-). This will all be worth it once I get past all the
bumps in the road :-).
Thanks & take care, Vikki.
--
Vi
frustrated with mandrake ATM
:-).
--
Victoria Welch, WV9K/7, SysAdmin, Embedded Systems Designer.
"Walking on water and developing software to specification
are easy as long as both are frozen" - Edward V. Berard.
Do not unto others, that which you would not have others do unto you.
ciate your offer of assistance, but I am just not sure about much
of anything at the moment. Perhaps I'll feel better after a break.
Thanks & take care, Vikki (who is aware she isn't making sense here :-).
--
Victoria Welch, WV9K/7, SysAdmin, Embedded Systems Designer.
"Walking
On Sat, 2002-07-13 at 13:44, John Check wrote:
> On Saturday 13 July 2002 8:26 am, Jim Wilson wrote:
> > Victoria Welch <[EMAIL PROTECTED]> said:
> > > Assuming that I have the same results I have had in the past, I'll track
> > > down that Docs/README.Joy
s to scan I think I am going to grab a little
stick time with the VUSN folks and run a SH-60 through the weeds for a
while and maybe head out to the CVBG and do a little vertrep and relax
some :-). Or maybe get a little crazy with an MD500 ;-)
Thanks & take care, Vikki.
--
Victoria Welch, WV9
Hello Jim,
Thanks for the response!
On Fri, 2002-07-12 at 11:32, Jim Wilson wrote:
> Victoria Welch <[EMAIL PROTECTED]> said:
>
> > Hi All,
> >
> > Just wondering if anyone else uses this stick successfully?
> >
> > It works perfectly here unde
Hi All,
Just wondering if anyone else uses this stick successfully?
It works perfectly here under windoz but after *hours* of changing the
.fgfsrc and starting and stopping fg for each change, I am getting a
little discouraged.
Thanks & take care, Vikki.
--
Victoria Welch, WV
On Thu, 2002-07-11 at 11:49, Arnt Karlsen wrote:
> On 10 Jul 2002 10:13:46 -0700,
> Victoria Welch <[EMAIL PROTECTED]> wrote in message
> <[EMAIL PROTECTED]>:
>
> Welcome, Vikki.
>
> > No problems since :-), but then again I only boot w98 anymore
> &g
the pics..
>
>
>http://dsl081-150-106.chi1.dsl.speakeasy.net/gallery/view_album.php?set_albumName=album01&page=1
Good ole Chicagoland :-).
Enjoyed the pix, thanks for sharing!
Take care, Vikki.
--
Victoria Welch, WV9K/7, SysAdmin, Embedded Systems Designer.
"Walking on water
(738964major+4147118minor)pagefaults
0swaps
It was huge :-) but stripping it helped quite a bit!
Anyway, off to try to beat the joystick into shape! It will be nice to
get the left wing out of the dirt :-).
Again, thanks for all the help!
Take care, Vikki (out of the darkness and into the blue :-).
-
piling along and it looks hopeful!
Thanks very much for all your efforts!
Take care, Vikki.
--
Victoria Welch, WV9K/7, SysAdmin, Embedded Systems Designer.
"Walking on water and developing software to specification
are easy as long as both are frozen" - Edward V. Berard.
Do not unto ot
lps!
./autogen.sh worked! Ready to run ./configure :-) :-). Off to remove
the old simgear stuff and build the new!
Thanks *very much* and take care, Vikki (who is getting an itchy stick
hand :-)!
--
Victoria Welch, WV9K/7, SysAdmin, Embedded Systems Designer.
"Walking on water and developi
etting everything correct in place :-).
Any ideas where I am staggering around in the darkness here?
Thanks & take care, Vikki (only driven to drink vanilla coke so far :-).
--
Victoria Welch, WV9K/7, SysAdmin, Embedded Systems Designer.
"Walking on water and developing software to specificatio
storage and not in any paths).
everything ./configured and made with the defaults.
Started over from scratch and reached the same results. Still trying to
figure out something else to check. Not at all sure where to go from
here.
Thanks & take care, Vikki.
--
Victoria Welch, WV9K/7, Sy
c++, but I guess I am going to learn (please don't
throw me in that there briar patch :-).
We'll see what goes on as we have time, AFAIK everything should be
current here unless I need one of the oddball compiler variants for FG.
Much to learn :-).
The adventure continues :-).
Thanks
directory `/usr/local/src/FlightGear/src/Aircraft'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/local/src/FlightGear/src'
make: *** [all-recursive] Error 1
Command exited with non-zero status 2
Thanks & take care, Vikki (almost there :-)!
--
Victoria Welch, WV9K/7,
are the challenge and the real fun. Perhaps I'll be able to do
something that will aid in getting them into FG!
> Welcome to the project and thank you for the interesting intro!
Thank you Sir, I am sure I am going to have fun with it - even more when
I get it running (starting to suffer with
d that wasn't the same
as the "base package" which I promply tracked down and got the cvs for.
It seems to be missing the INSTALL file, so I am currently working on
that as I can.
Progress (the good kind :-)!
Thanks very much and take care, Vikki.
--
Victoria Welch, WV9K/7, Sy
missing Opengl and (?)glut libs I can
get FG up and running again here. The stuff might be in suse, but
apparently not in M8.2 :-(. Been reading the docs and trying to figure
out what I need to do to resolve this.
Take care, Vikki.
--
Victoria Welch, WV9K/7, SysAdmin, Embedded Systems Designer.
, effort and enjoyment as
well as a way out of m$fs :-)!
Take care, Vikki.
--
Victoria Welch, WV9K/7, SysAdmin, Embedded Systems Designer.
"Walking on water and developing software to specification
are easy as long as both are frozen" - Edward V. Berard.
Do not unto others, that which
32 matches
Mail list logo