Jerry McAllister schrieb:
Hi All,
I started an instal of wget from ports - /usr/ports/ftp/wget
It comes up with some selections and I mistakenly selected GNUTLS.
Now I constantly get
"GNUTLS and OPENSSL are mutually exclusive, enable at most one of them"
And the make quits.
How do I get r
Yuri schrieb:
When I look at FreeBSD distribution I only see sparc64 (which I guess
implies V9).
When I look at LLVM compiler sources they define V8 as a 32-bit target
and V9 as 64-bit target.
Does this mean that FreeBSD can only run on V9 and that's what should be
assumed, and V8 is skipped fo
Hi, folks!
Warren Block schrieb:
On Fri, 23 Apr 2010, Frank Wi?mann wrote:
The beast does it. At least, it does print from the command line like
"cat /etc/rc.conf|lpr".
Excellent.
The printer does not accept a job from a GUI application like
"Firefox" or "Thunderbird". So how can I go on f
Hi, hello and a good day!
Warren Block schrieb:
On Thu, 22 Apr 2010, Frank Wi?mann wrote:
"chkprintcap -d -f /etc/printcap" exits with no error message.
That -d may have now changed things, but okay.
"lpc status lp" gives that:
lp:
queuing is enabled
printing is enabled
Hi!
Warren Block schrieb:
On Thu, 22 Apr 2010, Frank Wi?mann wrote:
Warren Block schrieb:
On Thu, 22 Apr 2010, Frank Wi?mann wrote:
I'm facing serious problems with my new bought HP ColorLaserjet 2025dn.
I plugged it in the right interface and it got detected. I did set
up /etc/printcap as
Warren Block schrieb:
On Thu, 22 Apr 2010, Frank Wi?mann wrote:
Hello, list!
I'm facing serious problems with my new bought HP ColorLaserjet 2025dn.
I plugged it in the right interface and it got detected. I did set up
/etc/printcap as following:
p|local line printer|HPColorLaserjet:\
Hello, list!
I'm facing serious problems with my new bought HP ColorLaserjet 2025dn.
I plugged it in the right interface and it got detected. I did set up
/etc/printcap as following:
p|local line printer|HPColorLaserjet:\
:lp=/dev/ulpt0:\
:sh:\
:mx#0:\
:sd=/var/s
Hello!
? ? schrieb:
2010/3/18 Aiza
/usr is the last partition in the slice. It has 15GB and only 600mb used. I
would like to shrink /usr to 7GB leaving me 7GB for another new partition
for mysql DB testing. How do I shrink /usr?
___
freebsd-
Hello!
Programmer In Training schrieb:
On 02/19/10 13:50, Polytropon wrote:
On Fri, 19 Feb 2010 13:42:09 -0600, Programmer In Training
wrote:
It's really past the point where I can just wipe the system and
reinstall, making sure to opt for linux emulation from the get go.
It is not needed t
Hello!
tristan schrieb:
i recently installed freebsd on my system. when i sign in to the root account,
i get a prompt telling me about the documentation, then a # sign. how do i
acess an interactive desktop like the one in windows/mac?
___
freebsd-qu
Hello, folks!
Having found some help over here I now hope to get so again. I'm having
trouble making the virtualbox-ose-port. It stops when making the needed
Qt libraries with the following error (hope I display enough of it):
QtUiTools -I../../../include/QtCore -I../../../include/QtGui
-I../
Hi, Glen1
Glen Barber schrieb:
Hi Frank,
Frank Wi?mann wrote:
After trying this I still get the message:
mount: procfs : Operation not supported
And a
mount -t procfs /proc/
The procfs(5) man page specifies the following:
mount -t procfs proc /proc
Once you make it right, it
Hi, Daniel!
Daniel Bye schrieb:
On Sun, Jan 31, 2010 at 08:39:49PM +0100, Frank Wi?mann wrote:
Hi, Glen!
Glen Barber schrieb:
2.) What version of VirtualBox is this? virtualbox-ose-3.1.2 and above
do not require procfs(5); lesser versions do.
When I try to mount /proc via fstab and "mount
Hi, Warren!
Warren Block schrieb:
On Sun, 31 Jan 2010, Frank Wi?mann wrote:
Warren Block schrieb:
...
The GUI is /usr/local/bin/VirtualBox. All of the others are
command-line interfaces.
I only have this in /usr/local/bin:
lrwxr-xr-x 1 root wheel 33 30 Jan 20:45 VBoxBFE@ ->
/u
Hi, Glen!
Glen Barber schrieb:
2.) What version of VirtualBox is this? virtualbox-ose-3.1.2 and above
do not require procfs(5); lesser versions do.
When I try to mount /proc via fstab and "mount -u -a" I get the
following error message:
mount: proc : Invalid argument
The line in /etc
Hi, Warren!
Warren Block schrieb:
On Sun, 31 Jan 2010, Frank Wi?mann wrote:
Hi, Warren1
Warren Block schrieb:
On Sun, 31 Jan 2010, Warren Block wrote:
On Sun, 31 Jan 2010, Frank Wi?mann wrote:
I want to launch my freshly installed VB with the "run"-command
under KDE 3.5.10, but it won't
Hi, Glen1
Glen Barber schrieb:
Frank Wi?mann wrote:
Is your user in the "vboxusers" group?
OK, now he is. But either as "root" or as normal user I get the same
result as in the message in the last mail described.
Ok, three questions:
1.) Did you log out after adding yourself to the gro
Hi, Warren1
Warren Block schrieb:
On Sun, 31 Jan 2010, Warren Block wrote:
On Sun, 31 Jan 2010, Frank Wi?mann wrote:
I want to launch my freshly installed VB with the "run"-command under
KDE 3.5.10, but it won't start. All I get is "Command can't be
executed" in german. I also tried with fu
Hi, Warren!
Warren Block schrieb:
On Sun, 31 Jan 2010, Frank Wi?mann wrote:
I want to launch my freshly installed VB with the "run"-command under
KDE 3.5.10, but it won't start. All I get is "Command can't be
executed" in german. I also tried with full pathname
"/usr/local/lib/virtualbox/Vbo
Glen Barber schrieb:
Frank Wi?mann wrote:
Glen Barber schrieb:
Hi Frank,
Frank Wi?mann wrote:
Hi, folks!
I want to launch my freshly installed VB with the "run"-command under
KDE 3.5.10, but it won't start. All I get is "Command can't be executed"
in german. I also tried with full pathname
Glen Barber schrieb:
Hi Frank,
Frank Wi?mann wrote:
Hi, folks!
I want to launch my freshly installed VB with the "run"-command under
KDE 3.5.10, but it won't start. All I get is "Command can't be executed"
in german. I also tried with full pathname
"/usr/local/lib/virtualbox/VboxBFE", but t
Hi, folks!
I want to launch my freshly installed VB with the "run"-command under
KDE 3.5.10, but it won't start. All I get is "Command can't be executed"
in german. I also tried with full pathname
"/usr/local/lib/virtualbox/VboxBFE", but that doesn't work either.
Where should I look for a solu
Kevin Kinsey schrieb:
Frank Wißmann wrote:
Hi, Beasties!
I just installed the new VirtualBox through ports. It worked fine, but
now I have trouble cleaning the directory. Neither "make clean" nor a
"rm -rf work/" do what they are supposed to. Here is the output:
Hi, Beasties!
I just installed the new VirtualBox through ports. It worked fine, but
now I have trouble cleaning the directory. Neither "make clean" nor a
"rm -rf work/" do what they are supposed to. Here is the output:
rm:
work/virtualbox-3.0.51r22902/out/freebsd.amd64/debug/obj/VBoxRT/VBox:
Frank Bonnet schrieb:
Hello
The question is in the subject :-)
Thanks a lot
___
Hi!
You may want to set
setenv LANGfr_FR.ISO8859-15
in your .cshrc.
Greetings Frank
--
GU d- s:+ a+ C+>$ UBS>$ P L- !E--- W N+@ !o K--? !w--- O !M- !V- PS
Ivan Frosty schrieb:
hello there, i was wondering if freebsd has pkg_libchk ?
thanks for your time
Yes, it has. It is located in /usr/ports/sysutils/bsdadminscripts.
Greetings Frank
--
GU d- s:+ a+ C+>$ UBS>$ P L- !E--- W N+@ !o K--? !w--- O !M- !V- PS+ PE
Y? !PGP- t+ 5 X !R tv- b++ DI !D
Manolis Kiagias schrieb:
On 01/01/2010 11:34 μ.μ., Frank Wißmann wrote:
Manolis Kiagias schrieb:
On 01/01/2010 10:01 μ.μ., Frank Wißmann wrote:
Hi all!
I am wondering where my handbook is. Under /usr/share/doc/de/ where it
used to be is nothing appropriate. Has anybody an idea for me? Using
Manolis Kiagias schrieb:
On 01/01/2010 10:01 μ.μ., Frank Wißmann wrote:
Hi all!
I am wondering where my handbook is. Under /usr/share/doc/de/ where it
used to be is nothing appropriate. Has anybody an idea for me? Using
sysinstall to install additional docs didn't solve the problem. Or
Chad Perrin schrieb:
On Fri, Jan 01, 2010 at 09:01:16PM +0100, Frank Wißmann wrote:
I am wondering where my handbook is. Under /usr/share/doc/de/ where it
used to be is nothing appropriate. Has anybody an idea for me? Using
sysinstall to install additional docs didn't solve the problem.
Hi all!
I am wondering where my handbook is. Under /usr/share/doc/de/ where it
used to be is nothing appropriate. Has anybody an idea for me? Using
sysinstall to install additional docs didn't solve the problem. Or am I
wrong?
Greetings Frank
--
GU d- s:+ a+ C+>$ UBS>$ P L- !E--- W N+@ !o K-
Lowell Gilbert schrieb:
Frank Wißmann writes:
Hi all!
When making the world new i get this error message:
machine -> /usr/src/sys/amd64/include
awk -f @/tools/vnode_if.awk @/kern/vnode_if.src -p
awk -f @/tools/vnode_if.awk @/kern/vnode_if.src -q
awk -f @/tools/vnode_if.awk @/k
Gary Kline schrieb:
to everybody, happy new years.
hoping that 2010 is [much] better year.
Same to you. In Germany it is now
2010. Greetings to all.
Frank
--
GU d- s:+ a+ C+>$ UBS>$ P L- !E--- W N+@ !o K--? !w--- O !M- !V- PS+ PE
Y? !PGP- t+ 5 X !R tv- b++ DI !D G e h+ r- y?
When pack
Hi all!
When making the world new i get this error message:
machine -> /usr/src/sys/amd64/include
awk -f @/tools/vnode_if.awk @/kern/vnode_if.src -p
awk -f @/tools/vnode_if.awk @/kern/vnode_if.src -q
awk -f @/tools/vnode_if.awk @/kern/vnode_if.src -h
rm -f .depend
mkdep -f .depend -a -nostdinc
Lowell Gilbert schrieb:
Frank Wißmann writes:
Hi all!
When building "Amarok" I get the following message:
Error: shared library "sgutils.1" does not exist
How can I obtain more information about it and where can I get it?
You need to give more details. In particular,
Hi all!
When building "Amarok" I get the following message:
Error: shared library "sgutils.1" does not exist
How can I obtain more information about it and where can I get it?
Greetings Frank
--
GU d- s:+ a+ C+>$ UBS>$ P L- !E--- W N+@ !o K--? !w--- O !M- !V- PS+ PE
Y? !PGP- t+ 5 X !R tv- b+
Am Samstag 28 Februar 2009 22:39:26 schrieb Roland Smith:
> On Sat, Feb 28, 2009 at 10:08:45PM +0100, Frank Wißmann wrote:
> > Am Samstag 28 Februar 2009 21:42:35 schrieb Roland Smith:
> > > On Sat, Feb 28, 2009 at 07:49:16PM +0100, Frank Wißmann wrote:
> > > > Hi,
Am Samstag 28 Februar 2009 21:42:35 schrieb Roland Smith:
> On Sat, Feb 28, 2009 at 07:49:16PM +0100, Frank Wißmann wrote:
> > Hi, list!
> > I have a problem using the above mentioned programs because there
> > doesn't seem to be a manpage installed. Can anybody give m
Hi, list!
I have a problem using the above mentioned programs because there
doesn't seem to be a manpage installed. Can anybody give me a clue on
how to get help?
TIA Frank
--
GU d- s:+ a+ C+>$ UBS>$ P L- !E--- W N+@ !o K--? !w--- O !M- !V- PS+ PE
Y? !PGP- t+ 5 X !R tv- b++ DI !D G e h+ r- y?
Am Donnerstag 19 Februar 2009 21:07:47 schrieb Polytropon:
> On Thu, 19 Feb 2009 18:14:01 +0100, Frank Wißmann
wrote:
> > I did it now the way you told me but it still shows 7.0-Release at
> > uname -a. I attach my "make.conf" and "cvs-supfile"' maybe ther
Am Donnerstag 19 Februar 2009 10:53:43 schrieb Polytropon:
> On Wed, 18 Feb 2009 21:50:25 +0100, Frank Wißmann
wrote:
> > Well, I used your settings of "default release=cvs tag=RELENG_7",
> > but the answer is still this:
> > FreeBSD grissom.einundvierzig.org
Am Dienstag 17 Februar 2009 21:20:15 schrieb Polytropon:
> On Tue, 17 Feb 2009 20:14:58 +0100, Frank Wißmann
wrote:
> > What is going wrong here? Why isn't ther build a 7_STABLE as I
> > desire? What do I need to change to get my wanted results?
>
> Are you sure you hav
Hello, list!
When I try to build my new world with todays sources I don't get
properly what I want. I configured my cvs-supfile with
"default tag=7_STABLE"
and all I get is this from dmesg:
FreeBSD 7.0-RELEASE #0: Tue Feb 17 19:02:23 CET 2009
and from "uname -a':
FreeBSD grissom.einundvierzig
Hi, folks!
I have bought for myself a taperecorder-to-usb-connector, which I wrote
in /etc/usbd.conf as following:
Device "Video tape"
Product "0x2821"
Vendor "0xeb1a"
Now I want to move all of my archived video tapes to harddisk/DVD. How
can I perform this, that means how can I access my ta
Matthew Seaman wrote:
Frank Wißmann wrote:
Frank Wißmann wrote:
Hi all!
Hope there's somebody out there who can help me with the following
problem:
When I type "startx" as root all is coming up as expected, the
X-Server and twm as WM. When I stop it, log in as a normal user a
Frank Wißmann wrote:
Hi all!
Hope there's somebody out there who can help me with the following problem:
When I type "startx" as root all is coming up as expected, the X-Server
and twm as WM. When I stop it, log in as a normal user and do the same
there is only a grey scre
Warren Block wrote:
On Thu, 3 Apr 2008, Frank Wi?mann wrote:
Hope there's somebody out there who can help me with the following
problem:
When I type "startx" as root all is coming up as expected, the
X-Server and twm as WM. When I stop it, log in as a normal user and do
the same there is only
somehow wrong. Should I change it, and to which value?
Such troubles I solve best when I look over it the next day. Usually I find it in two minutes then and wonder how I can have not seen such an obvious mistake..
Cheers
herbs
On Thu, 03 Apr 2008 22:38:04 +0200
Frank Wißmann <[EM
Roland Smith wrote:
On Thu, Apr 03, 2008 at 09:03:40PM +0200, Frank Wißmann wrote:
Hi all!
Hope there's somebody out there who can help me with the following problem:
When I type "startx" as root all is coming up as expected, the X-Server and
twm as WM. When I stop it, log in a
Hi all!
Hope there's somebody out there who can help me with the following problem:
When I type "startx" as root all is coming up as expected, the X-Server
and twm as WM. When I stop it, log in as a normal user and do the same
there is only a grey screen with a mouse-cursor coming up and doing
49 matches
Mail list logo