My FreeBSD server is on a mirrored pair of 160GB drives. I have been doing
partial backups by simply copying data and important config files to CD-RW,
but I wanted a way to back up the complete filesystem too, so I could
restore in case of disaster.
To that end I purchased a hard disk in an ext
This sure smells like a hardware problem.
I think the problem might be due to my bios settings running the CPU to fast
although I do not think I am overclocking it. This might explain the strange
timing of the problem, maybe the motherboard is unstable.
If you are not explicitly overclocking, t
lcear on how that will work with my existing ipf firewall rules.
Thanks for any leads.
--
*** I am Matt Staroscik and I approved this message. ***
[EMAIL PROTECTED] * http://wrongcrowd.com
___
freebsd-questions@freebsd.org mailing list
I am trying to get a CM11A X10 interface wired into my FreeBSD server. It
looks like most of the software out there relies on "x10d," which is only
available as source code:
ftp://ftp.danlan.com/ftp.danlan.com/homeauto/x10d.cm11.txt
Karl Denninger's site advises adding this to get the code to com
Yesterday I tried installing a port and found that it was broken though
not marked as such. The problems were simple -- simple enough that *I* got
it working! -- and I emailed the listed port maintainer with what I have
found.
Now, I haven't heard back, but I am not jumping to conclusions because
When I connect my PocketPC to my Samba server, the device has a very
strange name in smblog:
netbios connect: local=server remote=_cerdrc9cb8005
_cerdrc9cb8005 (192.168.1.94) connect to service Music as user USER
(uid=, gid=) (pid 44909)
"_cerdrc9cb8005" is just an example, the exact stri
t wet.
Good luck and have fun!
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
[EMAIL PROTECTED] * KF6IYW * http://wrongcrowd.com
"I am Matt Staroscik and I approved this message."
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
Lately I am getting a lot of messages like:
/kernel: vr0 - Packet lost
(I don't have the log in front of me so I may not have the exact syntax.)
My machine is a router/server, and vr0 is my internal interface, serving a
home LAN. I use ipnat and ipf for a firewall.
How can I go about troublesho
I have a RAID mirror (2x 160GB) which I would like to back up onto a spare
160GB drive.
I do not have a hot-swap caddy so I was planning on powering down the
system to get the backup drive in and out.
But once I have the new blank drive in, what is the best way to duplicate
the RAID? Ideally I
At 02:59 PM 10/25/2004, you wrote:
Just a side comment from the peanut gallery...
I was referring to the fact that in most cases, the solution in the end
most often IS to just reformat and reinstall because there's so much
cruft/crap/crud in the registry and Windows directories that that is
the bes
I need a hand from a disk guru as I am having some problems with a 7000-2
mirror under 4.10.
My 3ware Escalade 7000-2 has a pair of Maxtor 160GBs on it. I run them
mirrored. The other day, a drive bit the dust. As the disk was well and
truly hosed according to the Maxtor utilities, I chucked it
!
- matt s.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Matt Staroscik * KF6IYW * [EMAIL PROTECTED] * http://wrongcrowd.com
"The combined weight of the horrors I have authored wrought would crush
your carbon hearts into perfect diamonds of t
try a Knoppix CD too.)
Thanks to all for the input.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Matt Staroscik * KF6IYW * [EMAIL PROTECTED] * http://wrongcrowd.com
"The combined weight of the horrors I have authored wrought would crush
your carbon hearts into perfect d
ght myself some time.
Thanks again.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
[EMAIL PROTECTED] * KF6IYW * http://wrongcrowd.com
"I am Matt Staroscik and I approved this message."
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freeb
th
a SMART checker from ports.
Once the bad sectors were remapped, I was able to rebuild my array.
Hope this helps someone!
--
* I am Matt Staroscik and I approved this message. **
[EMAIL PROTECTED] * http://wrongcrowd.com * 4 8 15 16 23 42
___
fr
At 04:39 PM 3/19/2004, Dan Rue <[EMAIL PROTECTED]> wrote:
Umm.. I don't know what other people think about this - but I really
never run any PHP stuff from ports. It is easier, imo, to just download
the tgz and unzip it to the directory you want it in.
Yes, exactly. You can download the latest PH
What is the device? There are at least four in the
5.X GENERIC kernel:
You can also call the cable company and say that your computer doesn't have
USB. I think they usually have some Ethernet equipped devices for
situations like that. They should swap it out for free.
_
>> I am want to install postnuke but when-ever I go to do make under
>> /usr/port/www/postnuke, it wants to install mod_php4 again, I don't want
>> to have to reinstall ports everytime I add something new.
I recently installed PHPNuke and have some observations that might be
relevant to your situa
I have started building myself a new file server, and at the heart of it
are 2 Maxtor 160GB drives in a RAID-1, using the Adaptec 2400a.
Unfortunately I am having some kind of issue with data on the array getting
corrupted.
During disk activity (like makeworld, cvsup, rm -rf /usr/obj/*) I get
I am going to break this saga into 2 posts, one with the ugly details for
those who are interested, and one short post with the essential questions
and observations.
I have that card with 6 60 gig drives and set the box up (freebsd 4.7?)
and it would run for a day or so and just crash. I also r
To summarize previous posts: my Adaptec 2400A RAID card, with 2 Maxtor
160GB drives (model 6Y160P0) in a RAID-1, corrupts data and produces kernel
panics under heavy activity. This is under 4.8 (plain vanilla install), ECS
L7VTA motherboard (KT400), 512MB RAM, one vr NIC (on motherboard), 1 dc N
I have a system with a 'vr' driver NIC in it. ifconfig sees the interface
(and I have miibus and vr in my kernel) yet I cannot assign an IP address
to it with rc.conf or ifconfig it just doesn't "stick."
If I use ifconfig to take it down and bring it back up nothing changes but
the "RUNNING
Solved it: after more searching, the great Google hath taught me that you
can't have 2 IP addresses on the same subnet on one machine... and I was
trying to set the NICs to 192.168.1.n and .n+1. Too bad this doesn't drop a
message in a logfile though. Or if it did, I wasn't looking in the right
To make a long story short, I have been unable to get qpopper 4.0.5 + SSL
to work with Eudora 5.2.1. Using my self-signed cert I can get a secure
connection to Apple's OS X mail client, but not Mac or Windows Eudora. On
the Mac I see handshake errors, on Windows I get errors which I may be able
Thanks all for the help. Today I installed courier-imap, and reconfigured
Exim for Maildir delivery, and I can now get mail out over POP3 + SSL.
Apple's OS X mail client and Mac Eudora 6b are working fine. (I had sort of
been wanting to try maildirs, and this way I can evolve to IMAP if I want,
Does anyone know of a utility to monitor temperature and event logs on
"SMART" hard drives?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
26 matches
Mail list logo